Used Unbekannt Ø 26 Mm for sale (102,017)

Condition: good (used), Machine reamers, reamer, reaming tool, fitting knife cutting set Hnedpoucahvefx Ap Hsn -Machine reamer: Shell reamer with holder -Diameter: Ø 26 mm -Shaft diameter: Ø 16 mm -Total dimensions: Ø 25 x 120 mm -Weight: 0.3 kg

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan blower, without drive -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm Hnjdpfxex S Einj Ap Hon -Dimensions: 355/200/H490 mm -Weight: 7 kg

Condition: used, Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. Hnsdsqva I Ajpfx Ap Hon -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg

Condition: good (used), Drill sleeve, round rack, rack, sleeve for drilling machine, bench drill, pillar drill, column drill, box-type drill, thread cutting machine, tapping machine Hnsdpfx Aoiqhhgop Hen -Drill quill: round rack -Recording: MK2 -Dimensions: see photos / technical drawing with dimensions -Dimensions: Ø 62 x 267 mm -Weight: 4.3 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm Hsdpsxdhu Iofx Ap Henn -Weight: 11.2 kg

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg Hnedpfxeit Rmmj Ap Hsn

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Hnjdpsw Dn Sisfx Ap Hen -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 268 mm -Hole circle: Ø 242/Ø 13 mm Hnodped N Uy Djfx Ap Hjn -Dimensions: Ø 268/H37 mm -Weight: 13.7 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm Hjdpfxeb A Sfve Ap Hsnn - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Condition: used, Dovetail guide wedge bar, linear bearing, linear rail, linear guide, guide rail, linear guide rail, profile rail, slide rail -Guide rail: Linear guide rail, wedge-shaped for dovetail guide -Rail length: 265 mm -Total width: 21 mm -Rail height: 8/3 mm -Dimensions: 265/21/H8 mm Hedpsuzn Idofx Ap Henn -Weight: 0.2 kg

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: boltless rack, heavy-duty rack with storage shelves 2 bays / rack length 5600 mm Hnedpjw Tmd Ujfx Ap Hon -20 levels: compartment height adjustable -Stands: 3 pieces 3780/(1120/120 mm -Cross braces: 40 pieces 2765/60/240 mm -Rungs: 40 pieces 1115/50/100 mm -Shelves: 18 pieces of chipboard 2680/1090/40 mm -Price: complete -Transport dimensions: 3780/1500/H1400 mm -Total weight: 2010 kg

Condition: used, Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 13x spindle tools -Take: SK40 Hodpfxsc Ih Rrj Ap Henn -different shaft sizes: 22-63 mm -Price: complete -Weight: 24.3 kg

Condition: good (used), Ride-on scrubber-dryer, scrubber-dryer, floor cleaning machine, mop, floor cleaner, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter Hnsdpfxezd Ac Ts Ap Hjn -Air filter: Intake air filter -Type: unfortunately without a type designation -Inside/Outside: Ø 215/350 mm -Dimensions: Ø 350 x 605 mm -Weight: 6.1 kg

Condition: excellent (used), Radial fan, conveying blower, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, press conveyor, pneumatic conveyor with injector, grain conveyor -Pressure blower: Pneumatic conveyor with filling hopper -Type: Ø 520 mm -Engine power: 4.0 kW / 2920 rpm -Volume flow rate: m³/min -Inlet: Ø 215 mm Hnjdpfxezdzq No Ap Hsn -Fan wheel: Ø 520 x 45 mm -Fusing funnel: Ø 415 mm -Dimensions: 1790/650/H880 mm -Weight: 119 kg

Condition: good (used), Reamer, twist drill, drill bit -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg Hnjdpox R Sz Iefx Ap Hen

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Hnjdezcwmxspfx Ap Hjn -Three-jaw chuck: Chuck size Ø 190 mm -Passage: Ø 60 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 100 mm -Weight: 9.2 kg

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire -Welding wire: flux-cored wire, drum with unwinding device Hjdpfx Aezcv Rpop Hsnn -Wire: Aluminum Ø 2.4 mm -Roller: Ø630 x 460 mm -Transport dimensions: 680/640/H690 mm -Weight: 238 kg

Condition: new, Clamping table Ø 600 mm, manufacturer unknown,unused in opened original packaging, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hnodpoxah Itjfx Ap Hjn

Condition: ready for operation (used), Measuring head similar to Movomatic TP 2495 shaft Ø 20 mm thread Ø 6.7 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Hedpfx Apstxuhre Hsnn

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Tapping chuck: Quick-change tapping chuck, without collets Hedpfjza Tllex Ap Hjnn -Recording: MK5 -Bore: Ø 62 mm -Dimensions: Ø140 x 385 mm -Weight: 15.8 kg

Condition: good (used), Threaded spindle, threaded rod, threaded bolt, threaded rod, spindle, trapezoidal threaded spindle -Threaded spindle: Trapezoidal threaded spindle Hnodpfsza Tgvjx Ap Hjn -Thread: Diameter 70 mm -Gradient: mm -Thread length: 650 mm -Dimensions: see photos -Dimensions: Ø 70 x 650 mm -Weight: 16.5 kg

Condition: good (used), clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Hedpfju Tyu Dex Ap Hsnn -Clamping sleeves: length 115 mm, 20 pieces -Sizes: Ø 2 - 14 mm, see photos -Price/Delivery: complete -Transport dimensions: 330/190/H120 mm -Weight: 3.6 kg

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm Hsdpfsyzfu Aox Ap Hsnn -Wave: 16 teeth -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

Condition: used, Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Handover: in its current condition as inspected -Condition: without drive motors / control unit, see photos -Welding swivel device: swiveling -Turntable: Ø 700 mm Hjdpfxsvmrf Tj Ap Henn -Projection: 930 mm -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg Hodpofg Th Ajfx Ap Hjnn