Used Unbekannt Aluaufspanntisch Mounting Block for sale (14,018)

Condition: good (used), machine/vehicle number: 18287 + 88, Technical specifications: - Plate surface in good condition Lodpfx Aed Aakromtsad - Length: approx. 2000 mm - Width: approx. 600 mm - Height: approx. 270 mm - Plate thickness: 20 mm - Various holes, some with threads - Intermediate ribs between the top plate and the lower support surface - Weight per unit: approx. 100 kg

Condition: good (used), machine/vehicle number: 18285, Aluminum clamping table - clamping block Offer number: 18285 Manufacturer: xxxxx Type: xxxx Machine no.: 18285 Year of manufacture: xxxx Technical data: - Plate surface in good condition - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm Laedpofhv I Ajfx Amtsd - Plate thickness 20 mm - 6 pcs. screw-on supports 50 x 20 mm - Various holes, some with threads - Intermediate supports between the top plate and the lower support surface - 4 attachment eyes - Weight approx. 180 kg

Condition: used, for milling chucks, spindle head, tool holder, tool carrier -Manufacturer:Diebold, assembly block for assembling and disassembling tool combinations -Arrangement: vertical and horizontal -Mounting: SK40 -Dimensions: 275/160/H180 mm Lodpswvfrwefx Amtead -Weight: 10.5 kg

Condition: used, weight / kg taper MK / Set of 3 clamping blocks with T-slots Length: 1000mm Width: 80mm Height: 160mm Lodpfxjvcd N Aj Amtead T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A Ledpfx Amexvr T Eotead - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivel range: up to 45° Saw blade/cutting blade diameter: 200 mm Cutting depth: 47 mm Electrical connection: 230 V AC Weight: 14.5 kg Laodpfsc Snvfsx Amted

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Roller guide: for profile steel shears, flat steel shears... -Roller spacing: approx. 84 mm -Dimensions: see photos -Dimensions: 245/143/H70 mm Lsdpfjznu Atsx Amtjad -Weight: 5.4 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Type: 60/60-21 -Hole spacing: 177/60 mm / Ø15 mm Lodpfx Amjznt Tdjtjad -Dimensions: see photos -Dimensions: 205/95/105 mm -Weight: 8.2 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Lasdpfxsznt S Te Amtod -Punching tool: Punch holder for square notching punch for profile steel shears and flat steel shears -Hole spacing: 177/60 mm / Ø15 mm -Dimensions: see photos -Dimensions: 205/115/105 mm -Weight: 10.3 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm Ljdpfxoznk R To Amtjad -Weight: 2.4 kg/pc.

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg Lasdpfoznk Aiox Amted

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos Lasdpfx Asznkxwemted -Submission/Price: complete -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc.

Condition: good (used), Support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail Ledpfxjznkrwo Amtead -Support rail: for profile steel shears, flat steel shears -Receptacles: Ø 42 mm -Hole spacing: 550 mm -Dimensions: 690/200/H290 mm -Weight: 10.1 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, counter blade only, without notching unit -Dimensions: see photos -Dimensions: 310/170/H145 mm Lajdpoznircofx Amted -Weight: 24.1 kg

Condition: good (used), Year of construction: 1959, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device -Drive motor: AEG 0.55 kW -Load capacity: 7500 kg -Roller spacing: 295 - 1010 mm, roller Ø 230 mm -Rolling speed: 0.21 to 1.25 m/min Right/Left rotation Ljdpfx Amjznh Rwjtoad -Transmission: PIV Reimers -Control unit: with manual control, speed control via handwheel -Individual components: see photos -Transport dimensions: 1250/785/H800 mm / 705/600/H800 mm -weight: 918 kg

Condition: ready for operation (used), Grinding spindle IBCA52540T, max. 40,000 rpm, length: 31.1 cm, outer diameter: 50 mm, shaft outer diameter: 15/19 mm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ljdpsznq N Ajfx Amtead

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos Ljdpfx Aeznafyomtjad -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die Lasdjzm Tmnopfx Amtod -Punch tool: Angle notching tool, counter blade only, without notching unit -Hole spacing: 200/150 x Ø 18 mm -Dimensions: 255/200/H100 mm -Weight: 14 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die Lodszm Tkgspfx Amtead -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block Ledpfszm Sd Sex Amtjad -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Stamping tool: die holder -Hole: Ø 35 mm -Dimensions: see photos Ljdpszm Satsfx Amtsad -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Laodpfx Amjzm Samotsd -Punch tool: Intermediate block -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Condition: good (used), Power cable, flat cable, crane cable, rubber hose cable Laodpfjzmtw Tex Amtod -Power cable: Flat cable, crane cable, 4-core -Type: 4G 2.5 -Length: 30 m -Transport dimensions: roll Ø 565 x 25 mm -Weight: 8.4 kg

Condition: used, weight / kg Laedpfxjzmy Swo Amtod taper MK /

Condition: used, Used Office Container Features and Technical Specifications: - Insulated steel container design - CEE high-voltage power connection - Electrical distribution panel - Multiple 230-V outlets - 2 ceiling lights Lsdpfx Amoznk Dgotsad - 3 plastic windows with roller shutters (2 at the front, 1 on the side) - Glazed entrance door - Low-maintenance flooring - Ready for immediate use - Dimensions: approx. 6,000 × 2,450 × 2,550 mm Availability: at short notice Location: DE-63934 Röllbach