Used Unbekannt Particle Counter for sale (5,778)

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, particle counter, dust particle counter Podpfxsyk Dipj Al Sopr -Particle counter: Laser Particle Count -Type: CLJ-E -Number: 2 particle counters available -Price: per piece -Dimensions: 280/205/H135 mm -Weight: 2.4 kg/pc.

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Podpfoxhf Tiox Al Sepr Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 8) The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). Psdpfx Aloxtnqus Sspr The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter Ppjdpexv Ab Hjfx Al Sor The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: used, This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter Ppjdoxzg Rcopfx Al Sor

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Ppsdpfx Aec Snvfjl Ssr Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: good (used), Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm Ppodob Uhn Nepfx Al Sor -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

Condition: good (used), 2 used T-slot clamping angles Height: 1500 mm Width: 1000 mm Pedpoy Iakfsfx Al Sjpr Depth: 500 mm 10 transverse T-slots 3 longitudinal T-slots premium surface finish

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm Podpsd S D Dnofx Al Sepr -Length: 3020 mm -Weight: 22 kg

Condition: used, Offer 25351 Technical specifications: - Width approx. 1250 mm - Height approx. 1600 mm - Depth approx. 1000 mm - Plate thickness on the T-slot side approx. 90 mm - 8 pieces of T-slots, length 1250 mm - Center distance between T-slots each 200 mm Pedpfx Aley Ian Dj Sopr - Distance from the outside 100 mm - T-slot width approx. 35 / 60 mm - T-slot depth approx. 28 / 32 mm - Weight approx. 1400 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 5280/1325/H820 mm / 790 mm extendable to 6070 mm Ppodpfsxuqipex Al Ser -Load capacity: 16 t -Tires: Solideal 425/150-305 solid rubber dual tires -Dimensions when retracted: 7120/1325/H820 mm -Weight: 1760 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos Ppjdpstvb D Uefx Al Ser -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

Condition: good (used), Potentiometer, controller, motor controller, speed controller -Controller: speed controller -Type: S101A Ppodpfjy Ed H Eox Al Ssr -Number: 11x controllers available -Price: per piece -Dimensions: 160/110/H100 mm -Weight: 0.8 kg/pc.

Condition: good (used), Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters -Module cutter: Hobbing cutter -Type: Mod.3.5 Ø 85 mm -Hole: Ø 32 mm -Dimensions: Ø 85 x 85 mm -Weight: 1.8 kg Ppodpfxoy Eb Slo Al Sor

Condition: used, Year of construction: 2010, machine/vehicle number: xxxx, Lg.No. 26116 Technical data: - Length 2000 mm - Width 1000 mm - Plate height 200 mm - Wall thickness 25 mm - Hole diameter (perforations) approx. 28 mm - Center distance of perforations approx. 100 mm - Table height approx. 850 mm - Table height adjustable - 6 pcs. plug-in connecting bolts - 2 pcs. stop (with elongated hole + round hole) 225 x 50 x 20 mm Ppedpfx Ajy E N I Isl Sor - Total weight approx. 1000 kg

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ppsdpfx Aoy E U Efol Sjr Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Translated with (free version) For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, Year of construction: 1970, Block and tackle, approx. 100 m long, fully functional. Also tower crane with 36 m jib, partially defective controls. The stated price refers to the block and tackle. Tower crane approx. 5,000 euros. Ppjdpfoy Hb Eusx Al Ssr

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter Ppsdoy D Ndyepfx Al Ser -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 Ppodpfx Aloy D I Hyo Ssr -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: on a solid mobile base Ppjdpfjy D I Auex Al Sor -Clamping table: 415 x 415 mm -Table height: 845 mm -Sheet thickness: 90 mm -Base: 2 support casters, 2 swivel casters with locking brakes -Dimensions: 530/530/H845 mm -Weight: 162 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid mobile base -Clamping table: 1500 x 500 x 150 mm -Table height: 1010 mm -Sheet thickness: 30 mm -Plate: with supporting ribs Psdsqzl E Nspfx Al Sepr -Overall dimensions: 1530/710/H1010 mm -Weight: 320 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Psdpfewclciex Al Sopr -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: good (used), Adjustable traverse, crane traverse, indoor crane, crane hook traverse, load traverse, heavy-duty traverse -Crane traverse: heavy-duty traverse -Carrier: IPB 550 / HEB 550 Psdpjlpi Tiofx Al Sjpr -Dimensions: see photo technical drawing -Transport dimensions: 7220/920/H1015 mm -Own weight: 2100 kg

Condition: new, functionality: fully functional, overall weight: 3,700 kg, total height: 2,900 mm, total length: 12,230 mm, total width: 2,400 mm, load capacity: 28,800 kg, miscellaneous Transport Container, See Container, Lager Container Producing company Unbekannt Type FG-40H-00142 Height (mm) 2,900 Pedpfxoy E Ui Ro Al Sjpr Length (mm) 12,230 Lifting weight (kg) 28,800 Weight (kg) 3,700 Width (mm) 2,400

Condition: used, functionality: fully functional, Due to relocation, we are selling our surface grinding machine. The machine can be collected from our site in Königsbach-Stein. Pedpfx Aey Etbfel Sspr