Used Union Rhs for sale (391)

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Thermal insulation of the entire system. - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. - Oil separator - Emptying pump. Fgodorywyaspfx Akhef Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. - Maximum allowable weight: 100 kg. - Tank volume: 400 Lt.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: K734175, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (± 5%) to secondary 500V with a capacity of 3000 KVA Fgodpfxox Sv Egj Akhof

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: K731711, type of input current: three-phase, overall weight: 2,140 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 36 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (+-5%) to secondary 400V with power 630 KVA Fsdpfxex Sphbj Akhjgf

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: K725533, type of input current: three-phase, overall weight: 2,040 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, input current: 36 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10 KV (± 5 %) to secondary 400 V with a capacity of 630 KVA Fgjdsx Svxmopfx Akhsf

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: K734175, type of input current: DC, overall weight: 7,340 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, protection type (IP code): IP00, input current: 173 A, power: 3,000 kW (4,078.86 HP), type of output current: three-phase, output voltage: 500 V, 3-phase dry-type transformer from 10 kV primary (±5%) to 500 V secondary with a capacity of 3000 kVA Fodpfx Asx Swtfjkhogf

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: K725531, type of input current: three-phase, overall weight: 13,800 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 6,600 kVA, protection type (IP code): IP00, input current: 381 A, type of output current: three-phase, output voltage: 3,000 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10KV(±5%) to secondary 3000V with a capacity of 6600 KVA Fgedpfx Asx Sw A Hekhjf

Condition: used, functionality: fully functional, machine/vehicle number: K7 25500, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, 3-phase transformer (dry) from primary 10KV (± 5%) to 500 V secondary with a capacity of 3000 KVA Fgsdpfx Ajx Swaxskhof

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: K725490, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, Equipment: type plate available, 3-phase transformer (dry) from primary 10KV (± 5%) to 500 V secondary with a capacity of 3000 KVA Fsdpsx Sv R Nsfx Akhjgf

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: Fjdewdta Ejpfx Akhogf - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm Fjdpfoztrvnsx Akhegf table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 Fgodpjy Ipy Ajfx Akhjf • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Auxiliary voltage: 220/15 V Fsdpfxjzqbg Dj Akhjgf Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: used, Year of construction: 1997, functionality: fully functional, Manufacturer: DIXIE UNION Packaging Systems (Germany) Model: UNI-SLICER Construction: Stainless steel, suitable for food processing environments. Control system: Digital operator panel with membrane keypad and display, indicating programmable slicing parameters. Infeed: A wide conveyor belt feeds product into the slicing chamber. Slicing head: The large circular housing at the front likely contains a high-speed rotary knife. Discharge: The stainless steel collection chute/bin below the cutting area receives the sliced product. Side controls: A local control station with pushbuttons for operating and adjusting the machine. This type of machine is typically used to slice products such as: Bacon Ham Sausages Cheese Fjdpfxezkmkus Akhegf Cooked meat products Other block- or log-shaped food products, depending on the knife and feed setup.

Condition: used, Year of construction: 1978, x-travel 1000 mm y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system Fgodpfozmir Tsx Akhjf

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, CNC Table Type Boring and Milling Machine - Horizontal | Brand: UNION Type: BFT 105 | Year of construction: 1990 Fjdpfxezlal Ie Akhsgf Machining operations: Boring, reaming, deep boring, precision boring, reaming, countersinking, tapping, milling, circular milling, thread milling. The machine can be inspected under power by prior appointment. Condition: Very well-maintained, second-hand / operating condition. TECHNICAL SPECIFICATIONS: - Travels: - X-axis (table transverse movement): 1.750 mm - Y-axis (headstock vertical movement): 1.250 mm - Z-axis (table longitudinal movement): 1.175 mm - B-axis (table positioning): 360° - W-axis (boring spindle axial adjustment): 450 mm Clamping table: - Clamping surface: 1.250 x 1.400 mm - Maximum workpiece weight with centric clamping: 4 tons - T-slot spacing: 125 mm - T-slot width: 22H7 mm - Centring bore: 250 mm Boring spindle: - Diameter: 105 mm - Axial adjustment: NC-controlled - Tool holder: * with tapered shank: A 50 TGL 7837 * with steep taper: A 50 DIN 2080 * with clamping bolts: UNION 95-2805 (A 50 TGL 42620) DIN 69872-28 Speed ranges: - 3 continuously variable ranges: 4 – 2.500 rpm - Drive power: 23,7 kW - Max. spindle torque: 2.500 Nm Feed rates: Continuously variable feed range - X, Y, Z axes: 1 – 5.000 mm/min - Rapid traverse, X, Y, Z-axes: 10.000 mm/min W-axis: 5.000 mm/min B-axis: 3,2 rpm - Max. feed force: X and Y-axes: 16.000 N Z-axis: 25.000 N Specifications: - Total connected load: 50 kW/130 A - Voltage/frequency: 380 V/50 Hz - Machine weight (approx.): 17 tons - Dimensions: 6.560 x 4.370 x 3.450 mm EQUIPMENT: - 5-axis path control: Heidenhain TNC 355 - Swivelling control panel with central control station - Electronic handwheel - Other comprehensive ranges of accessories, such as tool holders, drill bits, milling cutters, and tool trolleys and cabinets ... - Comprehensive documentation available (foundation plan, circuit diagrams, hydraulic documentation, operating instructions and spare parts lists, programming lists) No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale -

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 160-300, Selling a used Union Bielefeld Flutemaster UF 5.2 CNC milling machine. Fsdozkp Ebjpfx Akhogf Year of manufacture: 1990. Condition: used, see pictures. Inspection and collection possible by arrangement. The buyer bears the costs and responsibility for disassembly/loading and transport. If interested, please send a price inquiry.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC-Steuerung Fgedpszkpv Hofx Akhsf Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Fsdpfx Ajt Hwq Rskhegf * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: excellent (used), Wire electrode, SG2 welding wire, welding wire Fjdscgqdqepfx Akhogf -Net weight: 15 kg -Number: 26x package available -Price: per package -Weight complete: 15.6 kg/package

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P Fsdpsd Sqymofx Akhsgf -Weight: 23 kg

Condition: used, Year of construction: 2009, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 2,500 mm, feed length X-axis: 8,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 1,000 mm, table height: 800 mm, feed length W-axis: 700 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 3,000 rpm, travel distance W-axis: 700 mm, workpiece weight (max.): 40,000 kg, We are offering this used Union PCR 150 CNC 840 D table boring machine, manufactured in 2009, for sale. Dimensions of the table area: 4000 x 4000 mm Dimensions of the rotary table: 2500 x 2500 mm Height of the table surface above the table area: 800 mm Travel range of the X-axis: 8000 mm Travel range of the Y-axis: 4000 mm Travel range of the Z-axis: 1000 mm Travel range of the W-axis (table travel): 700 mm Travel range of the B-axis: 360° Fsdpfx Akjzhumlehogf Spindle speed range: 5 - 3000 rpm Max. workpiece weight: 40 t If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1988, table length 2000 mm Fgedpfx Akstv H Txshof table width 1800 mm table load 12,5 t table adjustment - longitudinal 1.250 mm table rotating 360 Grad table positioning 4 x 90 ° feeds - longitudinal 0,63 - 2.000 mm/min total power requirement 4 kW weight of the machine ca. 7,6 t

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg Fgjdpfx Aswrxqxskhsf

Condition: excellent (used), Year of construction: 1995, overall weight: 5,600 kg, total height: 400 mm, total length: 4,000 mm, total width: 1,875 mm, T slotted bed plate UNION - DT Cast iron floorplate 4000 x 1900 x 400 mm Floorplate Length: 4000mm Floorplate Width: 1875mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:315mm T -slot size: 36mm Fsdpszc Ihgefx Akhegf Weight a plate approx.: 5600kg Number of matching pieces: 2 Length: 4000mm Width: 1875mm Height: 400mm Weight: 5600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Spindle support bearing Manufacturer: Union Overhang: 600 mm Spindle diameter: 130 mm Fgedpfsdvvtlox Akhsf