Used Vdf Horizontal Lathes Vdf Boehringer 48 Dk, 480X1500Mm for sale (16,398)

Condition: used, Year of construction: 1984, serial number 1113-23 turning length 500 mm turning diameter 220 mm chip conveyor ja kW Hedpevxltusfx Akrsnu Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min tail stock automatisch

Condition: used, Year of construction: 1996, turning diameter 250 mm turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Hsdpfsyan R Asx Akrsnu Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Hnedsz Rnrrjpfx Akrou Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: UC-1871, spindle speed (max.): 3,500 rpm, center width: 635 mm, center height: 115 mm, No minimum price – guaranteed sale to the highest bidder! This is a CNC internal grinding machine, converted from a CNC lathe. TECHNICAL DETAILS Center height: 115 mm Hodpfoz Nithsx Akronu Distance between centers: 635 mm Swinging diameter over bed: 380 mm Swinging diameter over removable bed: 520 mm Spindle bore: 75 mm Max. spindle speed: 3,500 rpm MACHINE DETAILS Control system: Fanuc 0-T Connected power: 15 kW Dimensions (L x W x H): 3,800 x 1,700 x 2,000 mm Weight: 6,000 kg Shipping packages: 2 pcs. EQUIPMENT Documentation

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm Hodpovdx I Ajfx Akrjnu weight of the machine ca. 5,25 t required space / m

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Hnedpfxjzpy Rrj Akrsu Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Turning length: 1000 mm Spindle speed: 2,240 rpm Spindle bore: 103 mm 12-position turret, VDI 60 Chip conveyor

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Hedpfx Asxq Eyujkrjnu

Condition: good (used), Year of construction: 2014, functionality: fully functional, Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control system: Siemens Sinumerik 840 Year of manufacture: 2014 Internal machine no.: 57 Turning length: 1,000 mm Turning diameter over bed / cross slide: 420 / 235 mm Cross slide travel: 250 mm Max. speed: 10 – 3,000 rpm Accessories - Steady rest - Extraction unit Hnjdpey R Rl Esfx Akrju - 3-jaw chuck Schunk 250-62 - Tool holder

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Hjdezrzxispfx Akrsnu Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm Hodpfjz Hmwkjx Akrenu total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Must move in short time

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type Hsdozw D I Ropfx Akrenu CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Hjdpfx Akjz Apc Rjrjnu Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: used, Year of construction: 1973, turning diameter over bed 490 mm turning diameter over slide rest 280 mm Hnedjtqqvvspfx Akrou turning length 2000 mm centre height 245 mm centre distance 2000 mm spindle bore 62 mm total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm Hnsdpfx Aeya Dz Dskrju - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min Hedpfx Aov A Sqhekronu spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: ready for operation (used), Year of construction: 1993, turning length: 1,900 mm, turning diameter: 700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 25 rpm, rotational speed (min.): 25 rpm, rotational speed (max.): 4,000 rpm, total height: 2,520 mm, total length: 9,000 mm, total width: 4,100 mm, overall weight: 21,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, -Turning length: 1900 mm -Maximum workpiece diameter over the bed: 700 mm Hodpeztr N Isfx Akronu -Spindle head A11 DIN 55026 -Tool system: 2 x 12 pieces -Tool holders according to DIN 69880, diameter 50 mm -Automatic door sliding mechanism -Tailstock prepared for diameters of 80 mm - 262 mm -Pressure booster pump

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Hnodpfxszu I A Te Akrsu Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Free loading onto a truck.

Condition: good (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 3,000 mm, total length: 4,000 mm, overall weight: 8,000 kg, The machine is coming from maintenance and is accompanied by a large amount of accessories. Hnedpfxjz Iif Hj Akreu

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Model: 48S Machine no.: 70.1025.002302 Year of manufacture: approx. 1972 Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg Hnjdpfx Akex Nqklsreu

Year of construction: 1991, condition: used, Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment. Hjdpszzdx Rsfx Akrsnu

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Hnedpfjwwkx Esx Akrsu Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm Hnjdezpwwpepfx Akrju DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Manufacturer: Böhringer Type: VDF 250 Cm Year of manufacture: 1997 Hnodpfsz Anv Nex Akreu with accessories.

Condition: used, Year of construction: 1996, turning diameter 820 mm turning length 6000 mm turning diameter over slide 520 mm control Siemens type 805 tailstock quill taper MT 6 transmission ratio 2 turning speeds 8-1600 U/min bed width 560 mm spindle bore 128 mm faceplate 600 mm 3 jaw chuck Forckrath 400 mm steady 250-500 mm diameter of quill 125 mm quill stroke 280 mm weight of the machine ca. 12 t dimensions of the machine ca. 9,5x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Hjdpoyqv Htofx Akronu More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No Hsdpfx Akjzrzxceronu X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min