Used Vettertec Spray Dryer & Flash Drying System for sale (41,620)

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Ljdpfxszunvao Acfsaf Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Lasdeztrpzjpfx Acfof Loading via filling hopper, e.g. by wheel loader or conveyor system Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse Ledpfx Ajxfkbaecfoaf - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s Ljdjzf N Ilopfx Acfoaf - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Laodpfx Acezcwnvofjf

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,096 mm, total width: 3,730 mm, total height: 173 mm, compressed air connection: 6.9 bar, type of input current: AC, year of last overhaul: 2026, overall weight: 1,656 kg, conveyor belt width: 910 mm, product height (max.): 2,000 mm, FOR SALE – COMPLETE AUTOMATIC M&R SCREEN PRINTING PACKAGE £25,000 + VAT (ONO) Location: Mid Wales, UK Due to business closure, we’re offering our complete automatic screen printing production package for sale. This is a fully operational, professionally maintained setup that is ready for removal and installation to a new premises. Equipment Included: 2018 M&R Diamondback S - 10 station / 8 colour Automatic Press • Under 400,000 impressions • Excellent working condition • Serviced annually • Full set of adult platens • Full set of junior platens • Full set of sleeve platens • Selection of squeegees and floodbars (10+ of each) • Includes 2 x Red Chili flash cure units 2018 Radicure 36/10 Electric Conveyor Dryer • 20ft conveyor length • Excellent working condition 2014 ABAC Genesis 7.5 270 Air Compressor • Serviced annually • Fully operational Key Features: • Complete automatic production package • Low impression count for an automatic press • Professionally maintained throughout • Annual servicing on press and compressor • Ideal for established print shops looking to increase capacity or businesses moving into automatic production • Available immediately due to business closure More photos and video demonstrations are available on request. Ljdpfx Aezb N Rtocfjaf We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment.The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use. Located in Mid Wales, UK. Price: £25,000 + VAT (ONO) Serious enquiries only please - more photos and videos can be provided. Viewing is welcome upon request. This setup is a bargain and a great addition to any new or established business.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price Lasdpfev Si Szsx Acfof To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Lajdpfxsdzqn Uj Acfof Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Lajdpfx Aeinur Ajcfsf Power: 11kW

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 Ledjxb Dcvopfx Acfsaf - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241204, total height: 905 mm, overall weight: 550 kg, total length: 1,200 mm, total width: 1,200 mm, type of input current: three-phase, tank capacity: 220 l, usable tank capacity: 110 l, input voltage: 400 V, workpiece width (max.): 200 mm, workpiece height (max.): 200 mm, outer diameter: 200 mm, workpiece length (max.): 200 mm, rotational speed (min.): 1,400 rpm, inner dimension width: 240 mm, power: 4.5 kW (6.12 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 100 kg, Vibra-Dry DK 200 WT maize dryer with pneumatic emptying and steel base. The high-quality Vibra-Dry DK 200 WT maize/grain dryer with a working volume of 220 liters is for sale. This versatile machine is perfect for drying and polishing with crushed corn granules, resulting in a flawless and shiny surface. Main features: Working principle: The moist parts are automatically transported from the circular vibrator via the separating table into the dryer. Pneumatically controlled outlet valve: For automatic emptying after drying. Coating: Inner walls and inlet and outlet area with durable 2-component PU coating to minimize wear and reduce noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the control cabinet, with levels for 0%, 50% and 100%. Automatic temperature maintenance by switching the heating on and off. Lajdpfevi Nhdex Acfsf Technical details: Filling with approx. 10-15% crushed maize granules (25 kg recommended). Commissioning: Use of GM 16 or GM 20 maize grains required. The machine is reliable, robust and ideal for farms that value quality and efficiency. Enquire now!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. Laedpfx Aeu D Ariscfef A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2011, condition: excellent (used), BURKLE PROCESS TECHNOLOGIES Düsentrockner-Anlage DURCHLAUFTROCKNER TRDUE 700 Nozzle Dryer System Laedpfx Aed R Sb Iecfef one-sided drying of various media on plane parts parts can be heated by the built-in IR emitter

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance. Lsdpfx Aszgw Tlocfjaf

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Ljdpfxoya Hvqe Acfsaf Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. Laedpfoq Nfuzsx Acfsf When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). Lodpfx Acezvxxnjfjaf In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Laodpfx Aezvxvajcfef Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Ledpfx Acszvgiuefjaf Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Digicolor is for sale. This granulate dryer operates according to the principle of dry air drying. 40 liters Small footprint Simple adjustment and operation Constant dew point of the dry air Optimization of all drying parameters Ljdpfoywh E Aox Acfeaf Energy-efficient drying technology No compressed air or cooling water required Dust-free dry air thanks to adsorption rotor technology Anti-stress function, SmartMode, prevents over-drying of the plastic granulate.

Condition: used, Year of construction: 2006, functionality: fully functional, The desiccant air dryer, model Card 40 S, from Ferratech is for sale. Laodszvulqopfx Acfof Heating capacity: 1.1 kW Volume: 40 liters

Condition: refurbished (used), Year of construction: 2020, Dear customers, To ensure a fast and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This allows us to directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Lajdjfr T Eqopfx Acfsf Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Transition from square to round: 150 EUR net Paint stop filter mat clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. Lasdpfx Asfn Nddscfof This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Lodpfxsfn Ndcj Acfjaf TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Options/additional cost for: Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. Lasdpfx Acsfv Hiqsfjf We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.