Used Vickers Sqp2-21-1C-18 for sale (18,489)

Condition: used, Hydraulic Power Unit 21 kW, with Tokimec Vickers Pump, Used machine Manufacturer (Motor): Shin Sheng Precision Ind. Co., Ltd. (Taiwan) Type (Motor): EEF-TL (Frame: 180M) Manufacturer (Pump): TOKIMEC INC. / Vickers (Japan) Type (Pump): SQP2-21-1C-18 Year of manufacture: 1995 Condition: Used, industrial execution Nwodpfxjzzc U Rj Ai Ten Overall dimensions: 900 x 450 x 700 mm Technical and operating parameters: Electric motor power: 21 kW (25 HP) Supply voltage: 380 V / 400 V (3-phase, 50 Hz) Current rating: 38 A Motor speed: 1450 RPM Pump design: Tokimec Vickers low-noise hydraulic vane pump

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Nodpfx Aisyrncie Tjwn Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: as good as new (ex-display), Type: PVXS-180-M-R-ES-0000-000 Part number: 8005062705C010 Nedpfxozvd S Ts Ai Tjwn Design: open-circuit variable-displacement axial piston pump Control: electric displacement control Rotation: clockwise Displacement: maximum 180 cm³/rev Speed: maximum 1,800 rpm Rated pressure: 350 bar Maximum pressure: 420 bar Theoretical flow: maximum approximately 324 l/min Control motor: Georgii Kobold KOD 346-1A MB/S64 Control motor: 0.09 kW, 230/400 V, 1,400 rpm Brake: MB3, 2 Nm, 230 V, 15 W Gearbox: SPN Schwaben Präzision GF71 Condition: unused surplus unit, stored in a wooden transport crate

Condition: ready for operation (used), functionality: fully functional, operating hours: 4,777 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 4,777 h Load capacity and mast Load capacity: 1,800 kg Lifting height: 4,500 mm Mast type: Triplex mast Full free lift: available Battery Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Hydraulics Hydraulic valves: 3rd and 4th valve Side shifter: available Hydraulic fork positioner: available Inspections and maintenance Service valid until: 10/2027 UVV inspection valid until: 10/2027 MACHINE DETAILS Dimensions and weight Length: 3,000 mm Width: 1,150 mm Height: 2,060 mm Own weight: 3,400 kg EQUIPMENT Battery charger Njdpo Ad N Dnjfx Ai Town Fork positioner with side shifter Lateral fall-through guard LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Lot number: 219 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm Nwjdovk Ukmopfx Ai Tsn Specifications Manufacturer SCHLATTER Model P1-42-11-22 1C VU122S S55S Year 1989 Condition Used Stock Number 0048 Connection 380V/50Hz S max 135 kWA Arm distance min /max 218/468 in mm Closing force 4KN Cooling water requirement 6 liter / min

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6721-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Filling Tank – 1.4435 – Double Jacketed – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal volume: 1,000 liters Total volume: 1,400 liters Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE Marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design according to AD 2000 code Njdpfx Aieykpqrs Town Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent full FAT testing and approval at the manufacturer’s site. Tests carried out include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Verification of markings • Complete documentation review FAT protocols fully available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator port (DN 200) • Multiple spare ports • Heavy-duty trunnion/pivot bearing • Transport and lifting devices DOCUMENTATION – fully complete and well structured Comprehensive, project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design test and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates for pressure gauges • Reports and EU conformity of installed components • Parts list assembly • Component drawings • Operating and maintenance manuals Complete digital documentation portfolio available. CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharma-manufacturing with complete PED Module G individual acceptance by TÜV SÜD, CE 0036 marking, and full FAT test documentation. Not a standard tank, but a quality project vessel with comprehensive GMP-compliant documentation. Immediately available.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 610203Z, overall weight: 295 kg, Vitap ALFA 21 Classic Multi-Spindle Boring Machine – 2016 Vitap ALFA 21 Classic semi-automatic multi-spindle boring machine manufactured in Italy. The machine is designed for precision line boring operations in furniture and cabinet production according to the 32 mm system. Suitable for vertical, horizontal, and angled drilling in chipboard, MDF, and solid wood components. The machine is in very good condition, fully functional, and ready for immediate operation. Features: Manufacturer: Vitap Model: ALFA 21 Classic Year: 2016 21 spindles 32 mm spindle spacing Pneumatic tilting boring head (0°–90°) Vertical and horizontal boring Foot pedal control Pneumatic material clamps Quick-change drill chucks Precision fences and stops Heavy-duty industrial construction Technical data: Number of spindles: 21 Distance between first and last spindle: 640 mm Spindle speed: 2800 rpm Max. drilling depth: 70–80 mm Max. tool diameter: Ø35 mm Table size: approx. 864 × 500 mm Motor power: 1.5 kW Nodpfxey Uwrye Ai Town Power supply: 400V / 3 phase / 50 Hz Required air pressure: 6–8 bar Machine weight: approx. 295 kg The machine can be inspected and tested while powered on.

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades Nwjdsv Nnr Iopfx Ai Tsn 2 stator blades Blade inlet: 220 x 180 mm Power: 3 kW PRICE REDUCTION FROM 1150 TO 950 EUR!!!

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Nedpfj Ad N D Ujx Ai Tewn Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: good (used), Year of construction: 1996, Milling Machine Mikron WF 21C 1996 Technical Data: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Nwedpfsyq E I Tox Ai Ten Clamping Table Clamping surface, vertical: 300x450 mm Number of threaded holes: 2 x 6

Condition: good (used), We offer a set of six plant conveyor belts, each equipped with its own motor for reliable and efficient operation. The belts operate on 3 x 220 Volts and are controlled via the included electrical cabinet, which is equipped with a frequency controller. This cabinet runs on 220Volts and allows all connected belts to be adjusted and regulated according to your specific requirements. The belts cannot operate separately on 380 Volt unless they are converted in the motor. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery Nsdjz Rd Hlspfx Ai Tewn

Condition: good (used), Year of construction: 1999, MOSCA strapping press Automatic pallet strapping machine, model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads. The press has a walk-in roller conveyor with a turnstile. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Nwedeq Svgkspfx Ai Ton Height min. 500 mm max. 1,600 mm Technical data: Continuously adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Type of closure: friction weld closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. clearance height: 1,600 mm Max. clearance width: 1,500 mm Length of the pressure plate: 1,600 mm Pressure force: up to max. 50,000 N selectable via potentiometer Belt guide distance: 440 mm Drive: via pole-changing Gear brake motor Rapid traverse speed: 150 mm/sec Pressing speed: 37 mm/sec Conveyor belt in the pressing area: Usable width: 1,500 mm Length: 2,100 mm

Condition: used, Vickers Drive DBM-03 / DBM-L2A / CG1616 03- for 2 axes: 25/70 ECC 50/140 ECC - removed from Ferromatik E50 - removed from running machine - fully functionalmanufacturer: Vickers type: DBM-03 / DBM-L2A manufacturer no.: CG1616 03 Nwsdpfx Asyxg Tzsi Ten spare part no.: 1676559190

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1235, TECHNICAL DETAILS Nwsdpfsz Ng A Hjx Ai Ten Production speed: max. 150 bags/min MACHINE DETAILS Connected power: approx. 45 kW Operating voltage: 380–400 V Frequency: 50–60 Hz EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2001, Bütfering Classic 211 CE wide belt sander Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm constant table top head infeed 1st unit type C combined contact roller sanding pad unit with -profiled steel contact roller. -Electronically controlled sectional sanding pad, element width 50 mm -Motor power 15kW 2nd unit type E -Sanding shoe unit -electronically controlled link pressure beam, element width 25 mm -Motor power 15 kW -Infinitely variable sanding belt speed 2 to 18 m/s via frequency converter Synchronous and counter-rotation -Belt blow-off device Transport carpet with infinitely variable feed2.5 - 13 m/min Vacuum clamping device 4 kW Control of the suction slides Roller tables in the inlet and outlet Workpiece cleaning : Rotating cleaning brush 0.75 kW Machine function tested Nedpfx Aet Ucp Uei Tjwn Price 15500.- year of construction 2001

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² Nwedpfx Aezrpu Eoi Ton no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: ready for operation (used), Year of construction: 2017, Siemens 828D with Shopturn control Maximum turning diameter over bed: 540 mm Maximum turning diameter over slide: 310 mm Center height: 270 mm Distance between centers: 2000 mm X/Z axis travel: 350 / 1850 mm Chuck diameter: 315 mm Spindle bore: 85 mm Spindle speed: 2250 rpm Spindle taper: D1-8 Tailstock center diameter: 75 mm Tailstock quill travel: 210 mm Tailstock taper: MK5 Feed rate: 5000 mm/min Rapid traverse X/Z: 5000 / 8000 mm/min Workpiece weight: - with chuck only: 300 kg - with tailstock: 700 kg - with tailstock and steady rest: 1200 kg Overall dimensions (without chip conveyor) L x W x H: 3840 x 1925 x 2235 mm Machine weight: 4200 kg Accessories: 2 steady rests, 2 Multifix holders, 3-jaw chuck Schunk Rota S-315, chip conveyor, manuals. Nwsdpezt Rlnofx Ai Tsn

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Nodpfx Aioqu Sc He Tswn Centralised position of lubrication points at the front of the machine

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 1,470 kg, load capacity: 180 kg, arm reach: 2,700 mm, This is a used and tested industrial robot KUKA KR 210 L180-2 2000 from 2008 with KRC2 ed05 controller. The system is designed for industrial automation applications and is typically used in palletizing, heavy component handling, welding, and manufacturing. The robot features a payload capacity of 180 kg, an approximate reach of 2700 mm, and 6 axes, making it ideal for flexible heavy-duty applications. The L180 variant offers an optimized combination of payload and reach within the KR 210-2 series. Nodpfoy Nfmbex Ai Tswn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, KuKa robot with Biesse RBO and Schmaltz handling equipment . Made by Biesse - RBO - KuKa controller KRC-2 - KuKa softwear KUKA 4.1.7 - Table for referanse point indication for the panels. - 4 meter long beam with carrige for the movement in X direction , parallell to the machine x axis - Schmaltz vacuum system - Separate el cabinet for the robot and other el cabinet for the RBO handling. This robot cell was connected to the Biesse Rover machine until 10.11.2025 , for the handling of panels to and from the machine. All robot function are 100% operative. Watch at : youtube.com/watch?v=cT5JA-PGM-c. Nedpoxy Aftefx Ai Tswn Sales from the factory close down. Please take a look at incl. video Rekman Maskin & Service - service of cnc machines since 1986

Condition: used, Year of construction: 2025, cutting diameter 220 mm saw band length 2455 x 27 x 0,9 mm cutting width 230 mm cutting speed 35-74 m/min m/min total power requirement 1,2 kW weight of the machine ca. 250 t dimensions of the machine ca. 1,6 x 0,9 x 1,8 m The GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation. Nsdpfx Aoz N Hv Hei Tewn Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements. Key features: - Miter cuts up to 60° to the left - Two-stage selectable cutting speed: 35 + 70 m/min - Vise with quick-clamping mechanism - Carbide saw blade guides - Automatic electric coolant system - Optional: Minimal quantity lubrication for improved cooling and lubrication

Condition: used, machine/vehicle number: H2X386V04438, Year of construction: 2019, operating hours: 22,572 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery year of manufacture: 2023 Battery voltage: 48 V Battery type: 5 PzS Battery capacity: 625 Ah Measured idle voltage: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV valid until: 07/2027 Operating hours: 22,572 h EQUIPMENT Former Linde full-service unit Facelift model Display of the tilt angle Lateral fall-through guard, easily removable Nwedoz Nyhvepfx Ai Ten White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Comfort seat with lumbar support Seat heating 3rd and 4th hydraulic function Fork positioner Side shift All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 222

Condition: used, machine/vehicle number: H2X386V04476, Year of construction: 2019, operating hours: 24,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Nwedpfxsz Nv Ewj Ai Tjn Fork spreader: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery voltage at rest: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: UVV 07/2027 UVV inspection valid until: UVV 07/2027 Operating hours: 24,655 h EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Side fall protection White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support and seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 131

Condition: used, machine/vehicle number: H2X386V04452, Year of construction: 2019, operating hours: 21,068 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Lift type: Full free lift Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage at rest: 50.4 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) certificate valid until: 07/2027 Nodpfez Nxfmex Ai Tswn Operating hours: 21,068 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Display of tilting angle Lateral fall-through guard Non-marking white tires LED work light front LED work light rear Road traffic lighting with turn signals Safety Light front Safety Light rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by e-mail. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In the event of non-timely collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 174

Condition: used, machine/vehicle number: H2X386V04463, Year of construction: 2019, operating hours: 23,617 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5 PzS Battery voltage at rest: 51.0 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Nwedpfx Asz Nvqaei Tsn Dead weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 23,617 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Tilt angle display Lateral fall-through guard White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd + 4th valve All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 106