Used Viet Grinding Machine/Calibrator/ for sale (67,298)

Condition: ready for operation (used), Year of construction: 1993, Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Iiodjltlx Tepfx Amgeh Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Suction hood diameter 140 mm 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Iodpfxszuzc Tj Amgoih Year of manufacture: 2019 Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW - Main motor power: 2x 75 kW - Feed motor: 11 kW - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h - Weight: 14.5 t - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg Iodszznh Nspfx Amgsih

Condition: excellent (used), Year of construction: 1995, 2 grinding aggregates with 22kW motors each Cleaning brush Iedpfxohxvi Ee Amgsih Smooth feed regulation Vacuum suction of the workpiece Powered receiving roller table

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes Iedpfsywftkox Amgsih FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs.

Condition: good (used), Year of construction: 1994, For sale Iijdpfjzpzynjx Amgoh OERLIKON MATTISON R.P. 5 Vertical Surface Grinding Machine with Magnetic Circular Table – Ø 1100 mm – 45 kW Description: For sale, a vertical surface grinding machine with a vertical spindle and rotary table, manufactured by OERLIKON MATTISON, model R.P. 5. This is a very powerful and robust machine, ideal for quickly grinding large series, as well as for grinding flat surfaces, discs, blades, large rings, or large mechanical parts. Technical specifications: Brand: OERLIKON MATTISON Model: R.P. 5 Diameter of the magnetic circular table: ~1,100 mm (measured with a meter) Spindle power / main motor power: 44 / 45 kW (60 HP) Motor speed: 750 rpm Motor: SELIN Genova (380 V / 50 Hz / 87 A) Included equipment: Large, recessed electromagnetic circular table Separate electrical cabinet (380 V) Paper filter system / coolant separator with belt conveyor Segment grinding wheel head Control panel on the front

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Ijdpfjywftdsx Amgoih

Condition: good (used), Year of construction: 1968, Malcus MC40 Centerless Cylindrical Grinding Machine Manufacturer: Malcus Halmstad, Sweden Model: MC-40 Iisdpfx Amjx Aq A Ejgoh Year of Manufacture: 1968 Control Panel: Mechanical push-button control with main switch and emergency stop Grinding Units: Two opposing units with adjustable guide and grinding supports Machine Construction: Heavy-duty cast iron frame Condition: Used, fully functional The Malcus MC40 is a robust centerless cylindrical grinding machine made in Sweden, renowned for its reliable precision during continuous industrial operation. The machine features a solid cast iron construction which minimizes vibration and ensures consistent grinding results. Its opposing grinding and guide assemblies can be precisely adjusted, making it ideal for machining rotationally symmetrical workpieces. An integrated dressing device keeps the grinding wheel in optimum condition during use. The mechanical control panel with its clearly arranged elements enables intuitive operation of the grinding process. Designed for high stability and long service life, this machine is an excellent choice for workshops and production facilities seeking a dependable solution for centerless grinding. No guarantee is provided for the accuracy, completeness, or currency of the information given.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Ijdpsz S Eidofx Amgsih Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Iodpfx Amsu Aqt Eogjih

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, overall weight: 10,000 kg, - Year of manufacture: 2002 - First owner: from our own use and first hand Iijdpfez Ru R Uox Amgeh - Fully functional, under power, ready for demonstration - Centre height: 230 mm - Centre distance: 2000 mm - Max. grinding diameter: 355 mm - External grinding wheel, standard: 500x80x203 mm - Surface grinding wheel, standard: 400x40x127 mm - Control: Siemens 840 D - Drive power external grinding spindle: 9 kW - Drive power internal grinding spindle: 2.2 kW - Total connected load: 25 kW - Total weight: 10,000 kg - Machine no.: 3021600302 Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Iisdpoz R Rpnsfx Amgjh Includes cooling system, dressing unit, and magnet.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Isdpfx Aoz Ernlsmgeih Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Iijdpfx Ajz Rqk Remgeh Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE Ijdpfx Amowxrnwsgsih INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: used, Year of construction: 1981, functionality: fully functional, overall weight: 4,800 kg, total height: 1,800 mm, total width: 3,500 mm, total length: 3,200 mm, Grinding machine NILES ZSTZ 315/630 C2 Max. wheel diameter: 315 mm Max. module: 10 Min. module: 1.5 Max. gear width: 160 mm Iedpfxsz Tc Ako Amgeih Max. workpiece weight: 200 kg Engine power: 8 kW Machine dimensions: 3.2 x 3.5 x 1.8 m Machine weight: 4.8 t

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, workpiece weight (max.): 1,000 kg, grinding height: 430 mm, grinding wheel diameter: 405 mm, table load: 1,000 kg, grinding wheel width: 50 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 500 rpm, grinding spindle motor power: 7,500 W, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Initial commissioning: 2024 Operating hours “grinding wheel in use” approx.: 100 hours The machine will be completely inspected by the manufacturer OKAMOTO and delivered with a geometry acceptance report. Manufacturer's warranty: 12 months Design: Column feed Control: Fanuc Screen: Touchscreen Workshop programming: for flat, slot, and step grinding (optional) Conventional operation of the machine possible (manual operation) Automatic multi-pass plunging Teach-in functions: Vertical, dressing, and reversing points Folding dresser with 3 diamonds next to the magnetic clamping plate Automatic compensation of the dressing amount Iiedpsz Hc Sdjfx Amgoh Longitudinal guides: Double prism, hand-scraped with thermally symmetrical behavior, PTFE coated Maximum table load: 1,000 kg Hydraulic table drive X-axis Electric servo table drive Z-axis Electric servo grinding spindle drive Y-axis Travel in the longitudinal direction: 950 mm Travel in the transverse direction: 440 mm Travel table-new wheel (Ø 355 mm): 522 mm Grinding wheel standard: Ø355x38 mm Grinding wheel diameter max.: 405 mm Grinding wheel width max.: 50 mm Grinding wheel bore: Ø 127 mm Grinding spindle drive power: 7.5 kW Grinding spindle speed, infinitely variable: 500-2500 rpm Leveling screws and support plates Operating/programming/and maintenance manual, operating tool LED lamp Machine paint: Dark grey/silver structure Machine dimensions approx. LxWxH: 3,560 x 2,900 x 2,210 mm Weight approx.: 4,950 kg Connection value: 15 kVA Accessories: Folding dresser with automatic compensation Electro-permanent magnet, transverse pole: 800x400 mm, p=13 mm Band filter tank: 180 liters Coolant flushing gun Flanges 1 piece Grinding wheels 1 piece Commissioning and training by OKAMOTO is mandatory for warranty purposes All information is non-binding, subject to prior sale. The machines remain our property until full payment has been made. Our general terms and conditions apply. Delivery: ex works Delivery date: by arrangement (approx. 8 weeks) Prices: plus VAT Payment terms: net, 10% with order, 90% before shipment Price for machine as understood is valid only in Germany. Other EU countries against a surcharge upon request. No export of the machine.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 32,110 h, functionality: fully functional, machine/vehicle number: 027.0500, workpiece weight (max.): 80 kg, total width: 2,200 mm, total length: 2,700 mm, total height: 1,800 mm, distance between centers: 600 mm, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 600 mm, input frequency: 50 Hz, input voltage: 380 V, space requirement height: 170 mm, tailstock quill stroke: 70 mm, Equipment: CE marking, Universal CNC Grinding Machine for Sale - Type: STUDER S33, Series 75 - Year of manufacture: 2008 TECHNICAL SPECIFICATIONS: - Table tilt: +8.5° - X-axis travel: 285 mm - B-axis travel: 800 mm - Grinding angle adjustment: -15° to +195° (1° increments) - Grinding wheel: 500x63 mm, 50 m/s - Distance between centers: 600 mm (max. load 80 kg) - Collets: B32 - Tailstock quill travel: 63 mm - Tailstock fine adjustment: 0.04 mm - Control unit: FANUC 21-TB, 10.4" - Memory: 64 KB - Coolant tank: 375 L with automatic paper filter feed ADDITIONAL EQUIPMENT: - Steady rest: ARBOTECH – GR – 055V - MARPOSS device: UNIMAR S30 Isdpjz Iybfsfx Amgoih - MARPOSS device: P4 - Grinding wheel balancing system: MPM The S33 grinding machine is equipped with a MARPOSS device for fast and precise workpiece measurement, an ARBOTECH auxiliary device for grinding workpieces in a single setup, and a grinding wheel balancing system. The machine has undergone regular annual servicing by the manufacturer, STUDER. It is highly precise and in excellent condition. It was used for toolmaking production runs of up to 50 pieces. It is connected to the power supply and ready for operation.

Condition: used, Year of construction: 1966, machine/vehicle number: 12485, grinding diameter:350 mm grinding length:2500 mm centre height:180 mm Iodpfei E Ix Njx Amgsih total power requirement:5,5 kW weight of the machine ca.:5,5 t

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t The machine is untested and is offered as a source of spare parts! Accessories, tools, and clamping devices shown are included in the scope of Iijdpswwl N Ssfx Amgsh delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1137.05, Used tool grinding machine Manufacturer: KAPP Model: AST305B Isdpfxewzk R Ns Amgeih Year of manufacture: 1979 Serial number: 1137.05 With accessories

Condition: like new (used), Year of construction: 2012, operating hours: 344 h, functionality: fully functional, grinding length: 850 mm, grinding width: 400 mm, total height: 505 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Base machine Type Linea Iron 6.3 Preparation for magnetic chuck with safety function Magnetic chuck 600 x 300 x 70 mm Iisdpeygap Rsfx Amgsh Paper band filter unit with manual paper unwind Air cooling for hydraulic oil Dressing fixture at the end of the table, incl. space for lateral diamond 2x grinding wheel flanges with manual weights Machine grinding range: Longitudinal 850 mm. Cross 400 mm including max. B (50 mm) grinding wheel. Height distance table to spindle center 505 mm. Weight 3,500 kg.

Condition: ready for operation (used), functionality: fully functional, The frames of the RSM series machines have a heavy-duty design and long, supported guides. The table can rotate and the precisely adjustable hydraulic feed moves smoothly in the longitudinal direction. WORKING AREA Height point 135 mm Workpiece length 640 mm Grinding length 500 mm Grinding diameter 8 mm - 200 mm Inside diameter without support 25 mm - 100 mm Workpiece weight between centers (max.) 50 kg Internal depth 125 mm Table miter cuts (max.) -3° / +9° R / L Peripheral speed 38 m/s DIMENSIONS AND WEIGHTS Grinding disc dimensions400 mm x 50 mm x 203 mm Grinding wheel internal dimensions (max.)50 mm x 40 mm x 16 mm Grinding disc dimensions (min.)45 mm x 35 mm x 10 mm Dimensions (length x width x height)2.5 m x 1.6 m x 1.5 m Weight 2500 kg Iedpfx Asri Ngyemgjih

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 • Complete clamping system, with two modified clamps for Ø14 and Ø16 • Automated pallets with diameters of Ø3, Ø4, Ø6, Ø10, Ø12 • Various grinding wheels for roughing and finishing, some new, for both carbide and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) • New workpiece rotation belt (replacement due in 2025) Iedpfx Aozcvakjmgeih • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter changes and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since the maintenance -separate sale can be considered- • Machine price: €25,000 - Filtration system price: €10,000

Condition: ready for operation (used), functionality: fully functional, ELB SWN 5 VA / Horizontal surface grinding machine -Grinding area X/Y/Z 525x375x255mm -Magnetic table 700x300mm Iisdpfxoz Sr Umj Amgjh -Table clamping surface 900x250mm -Table longitudinal travel 10 - 625mm -Table load max. 280 Kg -Table feed rate 1 - 30 m/min -Oscillating grinding 3 - 30 m/min -Distance from table to spindle center 525mm -Vertical feed rate 2 - 180 mm/min -Step size adjustable 0.001 - 2mm -Grinding wheel speed 3000 rpm -Coolant system -Machine feet -Documentation -Complete technical data, see photos Dimensions: L x W x H 2.7 x 2.2 x 2 meters / Weight 3500kg Errors and omissions excepted.