Used Viscotec Viscodos Iii Dosier- Und Förderanlage for sale (6,045)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 30785, type of input current: AC, total width: 750 mm, total length: 1,700 mm, total height: 1,300 mm, overall weight: 90 kg, input voltage: 230 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, For sale is a fully functional ViscoTec dispensing unit, type ViscoDos III. The unit was in productive use until recently and is in good used condition. The dispensing unit is suitable for conveying and precisely dispensing highly viscous media such as adhesives, sealants, silicones, resins, and pastes. It is made entirely of stainless steel and is mounted on a mobile base with an integrated control system. It was used for food applications. Technical data: Manufacturer: ViscoTec Pumpen- u. Dosiertechnik GmbH Type: Dispensing unit with ViscoDos III Year of manufacture: 2016 Serial number: 30785 Gkjdpfoz Hyimjx Afujc Power supply: 230 V / 50 Hz Connected load: 16 A Weight: approx. 90 kg Design: Stainless steel, mobile Condition: Used, fully functional until decommissioning Inspection possible by arrangement. Assistance with loading can be provided.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Gksdpfx Ajz Ixc Iefujc

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds Gkedpfx Afezt Ai Ejuec with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, Equipment: CE marking, documentation/manual, saw blade guard, STRIEBIG STANDARD III – Vertical panel saw For sale: a STRIEBIG STANDARD III vertical panel saw. This machine is manufactured by the renowned Swiss company STRIEBIG, recognized as a leader in the production of vertical panel saws. It is ideally suited for cutting furniture panels, MDF, HDF, plywood, chipboard, laminated boards, and plastics. The saw is in fully working order and ready for use. It is currently in operation at our company and can be viewed while it is running. Technical data: Manufacturer: STRIEBIG AG (Switzerland) Model: STANDARD III Power supply: 400 V Frequency: 50 Hz Blade diameter: recommended: 300 mm minimum: 290 mm Blade speed: 4750 rpm Vertically moving cutting carriage Mechanical scoring Godpfx Ajzizy Iofuskc Original dust extraction system Robust steel construction Precise guides Clamps for panels Clear control panel Safety switch Working area Based on the photos: Cutting length: approximately 5300 mm Cutting height: approximately 2200 mm (Please provide exact dimensions if desired). Technical condition: 100% operational Ready for use without additional investment Regularly used Can be inspected during operation Very accurate and stable Application Ideal for cutting: furniture panels MDF HDF plywood OSB boards laminated boards plastics

Condition: used, D+P Dosing and Testing Technology 05-755-011, used industrial spare part Used industrial spare part from Dosing and Testing Technology GmbH. Gsdez N Hgxspfx Afuskc Manufacturer: Dosing and Testing Technology GmbH Part number: 05-755-011 Condition: Used Quantity: 3

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Gsdpfsxt Habex Afuskc

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Gkjdpfx Aez Rn Dnjfuec

Condition: used, Year of construction: 2020, Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Gkedpfx Afjz Rn Dueujc

Condition: used, Year of construction: 2022, Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement. Gjdpoz Rn Dzjfx Afuskc

Year of construction: 2016, condition: used, Four identical retarder prover chambers for bakery applications are offered. Equipped with a shared control cabinet. Inspection possible by arrangement. Gsdpfez Irlvex Afuskc

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm • Conveyor width: 600 mm • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Sales information: • Delivery and collection possible by arrangement Gkedpfoz Rv S Hjx Afuec The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Year of construction: 2020, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 19/00XXX, Probat G45 Retro / Kirsch & Mausser Professional Coffee Roasting System – Complete System (Like New, 1,000 Hours) Price: 119,000 EUR net, plus VAT. Condition & History: • Operating hours: approx. 1,000 hours (like new, excellent condition). • Design: G45 Retro system, newly built by Kirsch & Mausser in 2019/2020, featuring a cast-iron design with complete, modern peripherals. • Availability: Immediately available for pick-up. Equipment (6 items included): Item 1: Probat G45 Retro Roasting Machine • Batch size: 25 - 55 kg • Gas type: Natural gas or propane (230/400 V, 50 Hz) • Separate drives for roasting drum, agitator in the cooler, and cooling fan (simultaneous roasting and cooling possible). • Closed housing with large maintenance openings, manual handwheel for airflow regulation (drum interior/jacket, aroma, external). • Cooling sieve with a second outlet, roasting fans directly on the machine, large cyclone with chaff collection container, and connection for manual fire suppression water supply. • Atmospheric burner with increased output (145 kW), continuously adjustable via potentiometer on the control panel, including all safety and monitoring devices (solenoid valves, flame and gas pressure monitoring, pressure regulator). • Complete thermocouple equipment (product, roasting air, roasting exhaust air, hot air supply in the rear wall) with separate connections for temperature recording systems (e.g., Cropster). • Manual control on the control panel with digital display for temperatures and roasting times, as well as a frequency converter for the roasting fan. Item 2: Frequency Converter for Drum Operation • Continuous adjustment of the roasting drum speed (manually or via recipe). • Individual speed monitors and live display on the touch panel. Item 3: Semi-Automatic Control with Touch Panel • Freely positionable control panel with touch panel. • Readability and automatic regulation of intake air temperature and roasting fan performance via recipes. • Parameter changes can be made at any time during the ongoing roasting process. • Additional potentiometers for independent regulation of the burner, roasting fan, and cooling fan. • Pneumatic actuation of the green coffee feed and the discharge flap in the drum lid. Item 4: Green Coffee Transport • Hopper for up to 60 kg of green coffee. • Conveying fan, conveying pipe with bends and clamps, and enclosed machine hopper. Item 5: High-Suction De-stoner • Hopper at the cooling sieve outlet, riser pipe with sight glass. • Collection container with impact apron to prevent coffee bean breakage, connected to the cooling fan. Gedez Eah Hopfx Afuekc • Air inlet flap for regulating the rise speed, manual slide valve at the outlet. • Frequency converter for the de-stoner fan with potentiometer on the frame. Item 6: Vacuum Measurement Drum • Pressure sensor in the pipeline between the roaster and the system with direct display on the touch panel. Terms & Conditions: • Location: Luxembourg. • Communication: Please submit inquiries exclusively in writing via the platform/email. No telephone contact. • Legal: Commercial B2B sale with exclusion of all warranties, liability for defects, and right of withdrawal. The system is sold in its current condition. Dismantling and transport are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm Gjdpfx Afoz I Eggeuokc the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: refurbished (used), functionality: fully functional, inspected and tested Gsdpfszvfarsx Afuekc

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Gedpfexa Drhjx Afujkc Chain conveyors from dryer Vibration separator

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 029.700, Painting/drying booth from Luft- und Trockentechnik GmbH, type KSP 6-BT, manufactured in 1992. The system is suitable for painting and drying workpieces and features an integrated exhaust/extraction system. Technical data: Manufacturer: Luft- und Trockentechnik GmbH Type: KSP 6-BT Year of manufacture: 1992 Manufacturer's number: 029.700 Usable volume: approx. 72 m³ Total volume: approx. 81 m³ Minimum exhaust air volume flow: 1,440 m³/h Gkodpfxjz D Evys Afujc Maximum permissible oven temperature: 90 °C Maximum solvent quantity: 4,302 g/oven load The painting booth has dimensions of 6 x 4 meters. The system includes an exhaust duct with extraction via the roof. In addition, a suspension/transport system is located in the ceiling area, to which workpieces or painting racks can be attached and moved through the work area. Dismantling will be carried out by the buyer.

Condition: used, 1 Fanuc Robocut a-OB CNC wire erosion machine, complete with all attachments, year of manufacture 1995 1 HTG600 H. Tschudin cylindrical grinding machine, year of manufacture 1970 Godpjz Rl Iqefx Afujkc 1 CNC universal tool milling machine, Deckel FP4A, year of manufacture 1985

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Gjdpjz R Sulsfx Afuskc Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: used, Approximately 225 used gauge pins from various manufacturers, applicable for measuring/testing bores to determine maximum and minimum dimensions, with a good side and a reject side. 1-piece. Gkjdpfxozz I Txe Afuoc Includes, among others, thread gauge pins made of tool steel, DIN 7162, H7, H6, H5 for measuring length, diameter, and bore. Manufacturers: Saliger, Hommel, HK, Blome, and FerTer. Price upon request. All technical specifications are subject to typographical errors and inaccuracies. Sales exclusively to countries within the EU.

Condition: new, Year of construction: 2023, VK reduced from 3200 to 2900 Wilkens 08/03/2026 Gkodpjz Sa Sgjfx Afusc 2.00m working width, Kramer quick-attach system, 9 tines, 1.1 cbm volume, new machine with paint damage.

Condition: new, Year of construction: 2023, 2.00m working width, Kramer attachment, 9 tines, 1.1cbm volume, new machine with paint damage. Gsdpfxoz Sa Slj Afuskc

Condition: new, Year of construction: 2023, 2.0 m working width, Kramer attachment, 9 tines, 1040 L volume, 725 kg dead weight, new machine with paint damage. Gkodpfoz Sa Sbex Afujc

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 65487, Equipment: documentation/manual, For sale is an Innomatec LTC-802 M Leak Test Computer in like-new condition, from our company’s inventory. The device was factory-calibrated by Innomatec in 2026 and will be sold including a current factory calibration certificate. According to the manufacturer, there are currently no restrictions regarding service or spare parts availability. Manufacturer: Innomatec Mess und Schnellanschluss Model: LTC - 802 M Year of manufacture: 2019 Condition: like new Category ID: 404 Type ID: 2224 Gsdszltyfepfx Afuokc Type: Measuring system Technical data Manufacturer: Innomatec Model: LTC-802 M Year of manufacture: 2019 Mass flow method Pressure range: 0.05 to 5 bar Single-channel leak test device Configurable testing system Suitable for large-volume components Factory calibration 2026 Scope of delivery: Innomatec LTC-802 M Original power supply Accessories as shown in the photos Factory calibration certificate Operating instructions (as shown in the photos) Application areas Automotive industry Medical technology Industrial manufacturing Quality assurance Leak testing Automated production systems Condition Like-new condition Factory-calibrated by Innomatec (2026) Completely cleaned Ready for immediate use Note: The photos of the current factory calibration certificate are part of the listing and can be found in the attached images. Sale is made by a company with an invoice. Inspection possible by appointment. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: K 300712/595, overall weight: 2,900 kg, total width: 125 mm, total length: 330 mm, total height: 225 mm, Godpfjz Dcaiox Afuokc

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Gkjdpfx Aozl Rqhsfuoc Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.