Used Vws Nederland Vws Nederland Labelling Line With Two Print And Apply Stations for sale (35,054)

Condition: used, Labelling line with two print and apply stations Gjdpfxez Nc R Se Afuskc This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control. The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling line with two print and apply stations Stations: 2, each with printer and label reel Controls: Display per station, push-button panel with emergency stop Construction: Stainless steel frame with conveyor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Gjdpfx Aoy Uni Nefuokc Video available on request.

Condition: used, Year of construction: 2014, Prints and applies labels to the underside of packs The VWS LPX Blow 4/300R prints a label and blows it onto the pack from below as it runs across the belt. Useful for trays and tubs whose top has to stay clear, or when you want information on the bottom as well as a top label. The machine was built in 2014 and sits on a stand with an 800 mm belt. It runs on 230 V. Located in Emmeloord, the Netherlands. Immediately available, price on request. Gksdpfez Ndauox Afuoc More photos and full specifications: / Type: Bottom labeller (print & apply) Application: Blow applicator from below Belt: 800 mm, on stand Electrical: 230 V, 50–60 Hz

Condition: used, Year of construction: 2017, VWS Nederland – Top/Base Labeling Machine (R → L) Manufacturer: VWS Nederland Type: Top / Base Labeling Machine (Right → Left) Year of manufacture: 2017 Description The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines. This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required. Gksdsyt Hmvopfx Afuec Technical Specifications - Manufacturer: VWS Nederland - Machine type: Top and bottom labeling machine - Labeling direction: Right → Left (R → L) - Label positions: Top and base (bottom) - Year of manufacture: 2017 - Application: Automatic labeling of trays, containers, and packaged products - Integration: Suitable for inline production and packaging lines Key Features - Automatic top and bottom labeling - Right-to-left product flow - Designed for high labeling accuracy - Suitable for various product sizes and packaging formats - Robust industrial construction Applications - Food packaging lines - Pharmaceutical products - Cosmetics and consumer goods - Industrial packaging operations Condition Used More photos and full specifications: / Manufacturer: VWS Nederland

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. Gedpfx Afsyrup Aouokc This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: used, Prints labels and applies them straight away This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height. According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture. Gsdsz Ndccepfx Afuskc Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Print and apply labeller Print method: Thermal transfer (ribbon) Application: Blow applicator (air) Construction: On column with conveyor, height adjustable

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Gedstqmwgopfx Afuskc Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. Gkjdpfxszx D I Ts Afuec The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. Gkjdpfoz Rnu Tsx Afujc _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Gkedpfszylxijx Afuec Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Gksdpfx Afoyaqttouoc More photos and full specifications: /

Year of construction: 2021, condition: excellent (used), Weima wlk2000 refurbished by AMIS in 2021, Zerma GSE700/1400 2021 Gkjdpfx Ajz Imkajfujc meant condition, used for PVC

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. Gsdsz Aibajpfx Afuekc • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. Godpfx Aoznd Sksfujkc If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: good (used), Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH Label Printing and Dispensing System with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for processing label sizes ranging from small nameplates to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Ideal for print and apply labeling applications for products, cartons, outer packaging, and pallets in the following areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard Features • Printing methods: Thermal transfer or thermal direct • Orientation: right or left • All-metal, industrial-grade construction • 16 MB SDRAM, 64 MB Flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media Specifications Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics®-compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g Print Server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, • independent of height and width • Infinitely scalable font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, Gkodpoibh Tkofx Afuoc • independent of height and width • International character set IBM®-Codepage 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphics features • Supports custom fonts and graphics, • including customer-specific logos • Barcode symbologies • Support for all 1D and 2D standard barcodes Barcode symbologies • Support for all 1D and 2D standard barcodes Technical Data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: ready for operation (used), * Brand: Sandvik * Model: hopper with vibrating chute and screening machine Godpjywm N Hjfx Afujkc * Type: Grizzly * Dim. hopper: 5500 x 3000 x 1100 mm * Dim. vibrating chute: 4500 x 1200 mm * Driving: 2 pieces vibration motors of each 6,2 kW * Dim. screen: 1200 x 1000 mm * Driving: 2 pieces vibration motors of each 0,8 kW

Condition: used, Year of construction: 2016, with a new conveyor belt. Godpfxszf N Rgj Afuskc Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Gksdpjz N R U Hefx Afusc Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit Gkodpfxoz E A T Ej Afuec 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Year of construction: 2016, condition: good (used), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact yet highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting, and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport Gkodpfsz Ea N Rex Afusc • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Year of construction: 2013, condition: ready for operation (used), A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer for printing trays from REA Jet in the outfeed of the machine, has been serviced regularly, including documentation and spare parts. Gjdpfxoi Atnxe Afuokc

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Gksdpfx Ajx Ngfljfusc Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: excellent (used), DIGITAL PRINTING LINE. Consisting of: a) ‘DOUCET’ Mod. CR-1.9-30.60 motorised roller feed b) “UNIVERSAL ROBOT” loading robot, Mod. UR 10 c) “WANDRES” cleaning machine, Mod. X 121/600/1200 d) “GIARDINA” rollers coating machine, Mod. G02/05 e) “GIARDINA” UV dryer, Mod. GST 140/1/2 Plus f) “GIARDINA” motorised roller conveyor, Mod. BRI/3000 g) “CARMICHAL” pressurised chamber h) “ATLAS COPCO” screw compressor, Mod. G4 FF h) “PROJECTA” digital printing machine, Mod. Evo 8 (max. 8 printheads) i) “GIARDINA” motorised roller conveyor, Mod. BRI/5300 l) “GIARDINA” rollers coating machine, Mod. G02/05 m) “GIARDINA” UV dryer, Mod. GST 140/1/2 Plus n) “GIARDINA” motorised roller conveyor, Mod. BRI/3000 o) “WEBER” labelling machine, Mod. 4300 R.H. (pro Apply) p) “FANUC” unloading-stacking robot, Mod. M-20iD/25 with "DOUCET" motorised roller conveyor Godpozxpdgefx Afuskc

Year of construction: 2011, condition: excellent (used), Wölco Lupo VPAB-53 Labeling Machine Fully automatic labeling machine for professional labeling Wide-belt multi-labeler Manufacturer: Wölco Machine type: Lupo VPAB-53 Gkedpfx Afoh N Sa Rousc Year: 2011 Connection: 400V Current: 3 x 16 A Power: 2.5 kW Air: 6 bar Wide-belt multi-labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Machine type: Lupo VPAB-36 Year: 2011 Connection: 400V The Lupo VPAB-36 is the ideal machine for continuous industrial operation when precise and variable label printing with position-accurate application is required. Sato S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a variety of functions. This printer, with its robust design, is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED for optimized monitoring of the print status • Robust design for harsh environments • Very fast printing speed with a maximum printing speed of 16 ips and adjustable rewind speed control • The print head can be easily replaced without tools • Newly developed sensor cover with a non-stick surface that can be easily removed and cleaned without tools • Easy uploading/downloading to/from an SD card or USB storage device without using the SATO "All In One Tool" application • Supports external printer settings via the SATO "All In One Tool" application or a web browser • Supports a multilingual display menu and printing of Asian fonts • Supports emulations in standard firmware • Supports various communication interfaces • Supports the SNTP protocol ?v=8RXShKhNsD4&list=PLIoSzgIDE9Judwq07lJFUJWOHG7dJPyms More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: CD-2008II, FOR SALE: CD-2008II Two-Line Wet Wipe Machine (Unused / Like New) We are offering a CD-2008II two-line wet wipe production machine in excellent condition. The machine has never been used in production, only tested, and is therefore in like-new condition. Key Features: • Double-line production (high efficiency) • Significantly faster than the standard CD-2008 model • Includes: folding, wetting, and cutting systems • Suitable for various wipe types (baby wipes, hygiene wipes, etc.) Condition: • Unused / test run only / zero production hours • Fully functional • Available for inspection or video demonstration Important: • Packaging unit NOT included (converting machine only) This is a great opportunity to purchase a near-new industrial machine at a significantly reduced price. 📍 Location: [Budapest, Hungary] 📦 Ready for immediate delivery Gkjdpfjy Tkgzex Afusc Shipping and handling are the responsibility of the buyer. For more information, photos, or videos, please contact us.