Used Wafios Vdf 60 for sale (20,838)

Condition: excellent (used), Year of construction: 1978, Machinetype: chain link fence machine Double spiral Manufacturer : WAFIOS Type: VDF80 Constr. year: 1978 wire diameter: 1,6-3,8 mm Ppodpfsvdtaaex Al Sjr mesh width: 20-80 mm working width: 2000 mm capacity: 160 m²/h

Condition: ready for operation (used), * Brand: Böhringer Ppjdsywngtopfx Al Ssr * Surface: 6000 x 2000 mm –2 decks. * Driving: 22 kW E-motor * Incl.: springs and springsupport

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Swing diameter over support: 1,350 mm Ppodpsy Id U Uofx Al Sjr Turning length: 10,000 mm Bed width: 1,120 mm Speed range: 1.4 - 280 rpm Max. torque (approx.): 20,000 Nm Workpiece weight between centers, max.: 10,000 kg with 1 steady rest / follower rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support Chip conveyor: KABELSCHLEPP Chuck guard The machine comes from first ownership, is free from defects, and is in very good condition. In 2023, the headstock was overhauled; among other things, the main spindle bearings were replaced and the main spindle and bull gear (bearing seat) were hard-chromed and reworked. The guideways are also in very good condition for its age.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter over bed 570 mm turning diameter over slide rest 365 mm turning length 3000 mm weight of the machine ca. 5 t dimensions of the machine ca. 5,5 x 1,44 x 1,38 m Additional information Well-maintained lathe from the maintenance department. Working range: Swing diameter over bed 570 mm Swing diameter over cross slide 365 mm Swing diameter in bed recess 600 mm Length of bed recess in front of main spindle 160 mm Turning length 3000 mm Center height over flat surface 280 mm Bed width 360 mm Maximum workpiece weight without steady rest 500 kg Maximum workpiece weight with steady rest 630 kg Main spindle speeds 11.2 - 2240 rpm Drive power 15 kW Feeds 60 longitudinal feeds/revolution 0.063 - 56 mm 60 cross feeds/revolution 0.0315 - 28 mm Tapping Psdpfoy Ed T Sjx Al Sspr 60 thread pitches 0.25 - 224 mm 60 thread counts 112 - 0.125 TPI Travels Cross slide 345 mm Top slide 125 mm Tailstock quill 190 mm Main spindle Spindle head DIN 55022 size 8 Camlock spindle head size 8 Spindle bore diameter 62 mm Spindle bore diameter at front bearing 100 mm Tailstock Quad diameter 80 mm Equipment and accessories: 3-axis digital readout 3-jaw chuck 4-jaw chuck RÖHM, 500 mm diameter mm Boring rod holder Center points Multifix tool holder with tool holders Steady rest Machine documentation

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Pjdpfox Ahx Dsx Al Sopr Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Year of construction: 1999, condition: ready for operation (used), A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026. Pjdpfsy Equyox Al Sjpr

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible. Psdpfx Aloy D Tpto Sspr

Year of construction: 1968, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible. Ppsdey D Tn Nspfx Al Sor

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 570 mm Podpfsx D Ufmsx Al Sepr turning diameter over slide rest: 365 mm turning length: 2000 mm feed per revolution: 0,06 - / 0,03 - 28 mm spindle turning speed range: 11,2 - 2240 U/min spindle bore: 62 mm spindle head: 8 nach DIN 55022 total power requirement: 15 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 4,5 x 1,5 x 1,4 m with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws *

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm Ppjdpsx E Dn Ajfx Al Ssr spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min 3-jaw-chuck diameter 250 mm quick change toolholder SANDVIK Coromant Capto drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. This machine is currently set up in our showroom and can be viewed on site! Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) Pedpfoyvuhzsx Al Sjpr For all specifications of this machine, please see the last images!

Condition: used, Year of construction: 2000, control Siemens Sinumerik 805 turning length 1350 mm Turning diameter above the facing slide 570 - 365 mm spindle passage 60 mm Psdpfxoyu U Auo Al Sopr --> Technical Specifications Precision universal lathe with programmable cycles --> Siemens Sinumerik 805 control system --> Turning length 1350 mm --> Swivel diameter of bed cross slide 570–365 mm --> Cross slide travel 345 mm --> Tool cross-section DIN 770h x b 32 x 25 mm --> Spindle bore 60 mm

Condition: used, Year of construction: 1995, turning diameter 570 mm turning length 2000 mm control num + CNC Keller Pjdpfxoyrhm Ue Al Sopr centre height 280 mm turning dia. over face-slide 365 mm spindle bore 62 mm spindle turning speed range 3 - 2500 U/min spindle head DIN 55 027 Gr. 8 cutting speed Konstant 1 - 9999 m/min feed in x - axis 0,01 - 50 mm/U feed range Z-direction 0,01 - 50 mm/U rapid travel - longitudinal/face 10 / 5 m/min feed power x-Achse 7100 N feed power z-Achse 12.500 N travel of cross-slide 345 mm upper slide travel 125 mm bed width 360 mm tailstock quill diameter 80 mm tailstock quill stroke 190 mm tailstock taper MT 5 max. workpiece weight -without tailstock 400 kg max. workpiece weight between centres 1000 kg kpiece weight:each extra steadyrest 300 kg threading metric 0,1 - 400 mm/Stg. dimensions of machine L x W x H 3,98 x 1,87 x 1,81 m Accessories: 3-jaw chuck RÖHM, 250 mmø; MULTIFIX-toolpost, solid steady, coolant

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 62 mm, turning length: 1,250 mm, turning diameter over bed slide: 365 mm, center height: 280 mm, overall weight: 4,000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock and without obligation: V D F - BOEHRINGER Cycle-Controlled Universal Lathe Model DUS 560 Year of Manufacture 1998 / completely overhauled in 2008 _____ Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide / top slide travel 345/125 mm Centre distance / max. turning length 1,250 mm Spindle bore 62 mm Spindle speeds, 2-step infinitely variable 3–500 / 15–2,500 rpm Infinitely variable longitudinal and facing feeds 0.01–50 mm/rev Rapid traverse longitudinal/cross 5 and 10 m/min Max. feed force facing/longitudinal 6.5 / 12.5 kN Workpiece weight max. between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive motor 15/21 kW Total drive 25 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, type 805, with direct input of all turning parameters via interactive user interfaces and suitable software, controller and monitor integrated in the sliding door, with memory extension and software for free contour entry, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage movement in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X, joystick for main spindle with stepless forward and reverse speeds • Mounted 3-jaw chuck model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driver plate approx. 250 mm, single faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost type CD with 5 different Multifix holders • Separate toolpost block for mounting CAPTO toolholder with internal coolant supply, various holders, partially with collets • Tailstock with air bearing for easy movement, work light • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate electrical cabinet, adjustable spindle end stop, work light, etc. Condition: very good – guides in very good condition, machine is under power and ready for demonstration Please click here for a video of the machine: Delivery: ex stock – as inspected Pjdpfxoyqw Eqe Al Sspr Payment: strictly net before delivery We look forward to receiving your order. Further lathes of all sizes in stock – please enquire.

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 570 mm, turning length: 2,000 mm, spindle bore: 62 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 3 rpm, workpiece weight (max.): 2,000 kg, Equipment: rotational speed infinitely variable, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or more, these machines offer optimal machining efficiency for the production of single parts and small series. This machine is currently on display in our showroom; an on-site inspection is possible! Scope of delivery: Includes drawer cabinet with various tools and Multifix holders. Specifications Manufacturer: VDF Boehringer Ppjdpfswv S Rtox Al Sor Model: DUS 560 TI Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Maximum turning length: 3000 mm Spindle bore: 62 mm Speed (min-max): 3 - 2500 rpm Spindle power: 19 kW Spindle mount: DIN 55 027 Gr. 8 Tool turret: Multifix Turret positions: 2 Tailstock taper: MK5 CNC control brand/type: Heidenhain Manual Plus 4110

Condition: used, Year of construction: 1995, turning diameter 560 mm turning length 1250 mm control Sinumerik 805 turning dia. over face-slide 340 mm spindle bore 63 mm spindle turning speed range 3 - 2500 U/min feeds - longitudinal 0,001 - 3 mm/U feeds - cross 0,001 - 3 mm/U rapid traverse longitudinal 7 m/min rapid traverse cross 3,5 m/min thread - mm pitch 0,5 - 140 mm thread - inch 1/4 - 56 Gang/ inch. thread - module mm main drive 19 kW clamping length max. 2250 mm total power requirement 24 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,0 x 1,65 x 1,75 m Psdpfx Alsymp Sus Sjpr controll Siemens 805, for cone turning, contour turning and threat cutting. Machine has MULTIFIX toolholder system size "C", steady and 3 jaw chuck.

Year of construction: 2007, condition: ready for operation (used), Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available. Psdpfsr Nd Ekox Al Sepr

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Pjdsxq Eyuopfx Al Sspr

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Ppedpfsd Ewaaox Al Sjr Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Ppjdpsuq A Icsfx Al Ser Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Perfect condition.

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m Psdpfx Alsw Rkt Ie Sspr incl. accessories see picture *

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO. Ppodpfx Asw Ny S Dsl Ssr

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Podsv R Hamspfx Al Sopr Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: D38L/7176, Offer Number: D38L/7176 Machinetype: chain bending machine Make: WAFIOS Type: KZ60 Constr. year: 1966 wire diameter: 2-7 mm output - pieces/min: 100 Location: In our warehouse Ppedpfx Aswi Sy Iol Ser

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Pedpfefmd Dhox Al Sspr Spindle bore 62mm Spindle speeds 11,2-2240 rpm MARCELS MASCHINEN CH