Used Wandres Tresy for sale (18)

Condition: new, • Usable width A (mm): 3200 • Order number: 6732601 • Available: 2 units Isdpjfrux Aofx Ahzjid

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Ijdsuaq D Aepfx Ahzjid Max. working thickness: 60 mm

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06 08 20, compressed air connection: 6 bar, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, We are offering this used WANDRES CF 05/2750 brush machine, manufactured in 2006. Iedpozfprdefx Ahzoid Type: CF 05/2750 Year of manufacture: 2006 Machine no.: 06 08 20 Voltage: 400 V Frequency: 50 Hz Power: 3.5 kW Compressed air connection: 3/4" Pressure: 6 bar Residual oil content: ≤ 1.5 mg/m³ Filter fineness: ≤ 40 µm The machine is sold including 2 new spare belts, with a value of approximately €1,000. If you have any questions or require further information, please feel free to send us a message or call us. The machine is disassembled and ready for loading.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 2000 Iodpfeyw Rqzjx Ahzjid

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Upper (top) section lifting motor: 0.25 kW - Max working width mm 1300 ca. Iijdpoyw Rqhofx Ahzod - Built-in control panel

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Iedpfxeyw Rpqe Ahzjid - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 1500 ca.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Iiedeyw Rnyspfx Ahzsd To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Max useful working width mm 3500

Year of construction: 2004, condition: used, - working width (mm): 400 - Brush: top and bottom - Spraying device Isdpfx Ahonl D U Ijzeid

Condition: good (used), Year of construction: 2005, functionality: fully functional, working width: 3,000 mm, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. 3000 mm wide cleaning unit for painting line or drilling line etc. Tornado cleaning duct system, model TKF 180/M/3000 2 x ½” compressed air connections 2 x Ø 150 mm suction connection closable cleaning nozzles, requires a 24V voltage supply for the equipment Iiodpfx Aoudib Iohzed Cleaning brush Sword Brush BIQ 46/1/3000 linear cleaning brush BL 32 mm, polyamide brush with 7 rows of bristles 2 pcs Electrical connection 400V / 50 Hz, 0.19 kW Compressed air connection filtered (< 40 µm) dry oil-free compressed air No stands and legs, only cleaning duct and 2 pcs of brushes.

Condition: new, functionality: fully functional, power: 37 kW (50.31 HP), fuel type: electric, color: other, Year of construction: 2026, Ağır Hizmet Tipi Titreşimli Yatay Elek, orta boy agregalar ve bitmiş ürünler gibi her türlü malzemenin sınıflandırılması için tasarlanmıştır. * Model: FABO HTE-2260 * Tip: Titreşimli Yatay Elek * Boyut: 2200 x 6000 mm * Güverte boyutu: 2-3-4 * Motor: 37 kW * Rulmanlar: Ağır hizmet tipi SKF,FAG veya NACHI * Kapasite: 400-500 TPH Ijdpoy E Hwmjfx Ahzsid * Şasi, motor ve güvenlik korumaları dahil.

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine. Machine frame and feed • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left (in feed direction) • Continuously variable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel to the top edge of the machineUnit 1: Cross-belt unit • Pressure lamella belt with felt and graphite • ISD link pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt blow-off deviceUnit 2: CBF combination unit • Grooved rubber contact roller Ø 130 mm, 60 Shore Iedpfx Ahjy Twwyszoid • Cross-feed lamella belt with separate 4.0 kW drive • ISA link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt blow-off deviceUnit 3: Cross-belt unit • ISD link pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt blow-off deviceControls and functions • Siemens MP 377 12" Multi-Panel HMI: 12" color display, program memory for 300 programs, all parameters set via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine inlet with start switch • Over-thickness safety roller at inlet: automatic lifting of contact roller and segmented pressure beams; feed shutdown • ISA/ISD control: high-resolution workpiece detection in 22 mm increments; free loading of complex shapes; multiple loading with minimal spacing; adjustable grinding intensity and pressure via program • ISA linkage pressure beam system (Unit 2): pressure piece movable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separate adjustable edge pressure (outer edge only or outer and inner edges); selectable for longitudinal and transverse edges or longitudinal onlyTechnical data • Working width: 1350 mm • Drive unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Anti-rebound feed (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s • Sanding belt size (cross belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Stepless feed speed: 3–18 m/min Additional equipment • Workpiece ejection device with WEBER ES system (workpiece-controlled; energy-saving; individual slide control) • WANDRES micro-cleaning, single-brush version (power sword brush with integrated micro-moistening for optimal paint dust removal)

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): Iodpjy Ui Rnjfx Ahzjid machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 Iiodpedt Rgvefx Ahzjd VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) Iiodpfx Aeyhqa Ajhzjd E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN Iiedpfx Aotr Envehzjd W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: J10039A) Gantry-portal Loader (Double pick-up station) "MAHROS" Mod. Brush J10039B) 1st Double-side Sizing & Edge Bander "IDM" Mod. Activa SB 1/9900 J10039C) In-feeding Rollerway "MAHROS" Mod._____ with 90° Turning device Iedshmkxqopfx Ahzjid (from lengthwise to crosswise) with double cone system J10039D) 2nd Double-side Sizing & Edge Bander "STEFANI". Mod. Performance SB2 J10039E) 90° Converyor Translator "MAHROS", complete with motorised roller conveyor and 90° motorised belts to translate the panels to the MAHROS Unloader J10039F) Brush-cleaning machine "WANDRES" Mod. BI46/1/1300 J10039G) Gantry-portal Stacker (Double station) "MAHROS" Mod. Brush

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Iedpfjq Tp H Hjx Ahzsid Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Iiodpfxoyghwce Ahzsd Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.