Used Weiler Radial Arm Drill Weiler - Vom 50 for sale (41,556)

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Dodpsyub Spefx Agmjck Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Dsdpjyrdplofx Agmeck Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Dcjdpfxjzi S Snj Agmek Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dcedpfx Agox Sx D Somok

Condition: ready for operation (used), functionality: fully functional, RADIAL DRILLING MACHINE DORMAC 1250 X 50 RAPID 50 MODEL USED MACHINE Dcsdpfoziciqjx Agmjk INTERNAL CODE: SVR 219

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Dcsdpfx Aow Hanhegmsk Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Dedpfjy Rznwex Agmeck Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Dcedpfx Aeu T Ty Hsgmok Weight: approx. 2.8 t.

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw Dcodpfx Agem Sg R Djmok spindle speed 22 - 2000 rpm Weight 2 to

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical specifications: - Drilling capacity in steel 28 mm - Thread cutting device - Drill spindle mount MK 3 - Drill spindle stroke 160 mm - Table dimensions approx. 750 x 500 mm Dcjdjb Ennkepfx Agmsk - Overhang up to approx. 620 mm - Vertical stroke of the arm 600 mm - Column diameter 250 mm - Spindle speeds in 12 steps 80 - 2800 rpm - 3 feed rates 0.1 + 0.15 + 0.25 mm/rev - Drill spindle drive 400 V / 5.5 kW - Coolant system - Space required approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Operating manual

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW Djdpowf Iqnefx Agmock - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, center width: 1,000 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed range: 0 – 2,500 rpm Swinging diameter: 500 mm Dcjdpfxjzpxgls Agmsk Diameter of rotation over bed: 570 mm Diameter of rotation over carriage: 340 mm Center height: 280 mm Distance between centers: 1,000 mm EQUIPMENT Accessories (see pictures)

Condition: used, Precision lathe with cycle automation for chuck and shaft work, digital drive technology (Sinamics S120) and a Siemens Sinumerik 840D sl control running WEILER's operator-oriented SL2 software. Distance between centres 2000 mm, swing over bed 570 mm, spindle bore 83 mm, main drive 20/17 kW up to 2500 rpm. Year of manufacture 2022. Dcodpfszl Ipnsx Agmek

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): Dcsdpfxozcv Ego Agmok - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm Dodpey D T Uvefx Agmock turning length 1000 mm control Siemens / Weiler D2 weight of the machine ca. 3,2 t dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: excellent (used), Year of construction: 2020, Steady rest for WEILER E40 and E50 lathe In very good condition. Price for E40 steady rest: €2,500 Price for E50 steady rest: €2,850 Dsdpfotx Avkjx Agmock Clamping range: 10 – 150 mm.

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Dcjdpfx Aoyfnwmsgmek

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 340 mm, turning length: 1,100 mm, spindle bore: 63 mm, Diameter in offset 600 mm, max. workpiece weight 1000 kg, 1200 Nm, spindle speeds 625-2500 rpm, 20 kW Dcedpfsx Sxb Djx Agmsk

Condition: ready for operation (used), operating hours: 33,600 h, functionality: fully functional, spindle bore: 83 mm, center width: 2,000 mm, turning diameter over bed slide: 570 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens 810D, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swing diameter over bed: 570 mm Swing diameter over carriage: 340 mm Centre distance: 2,000 mm Speed range, stage 1: 1–625 rpm Speed range, stage 2: 4–2,500 rpm Spindle bore: 83 mm Spindle nose: Size 8 DIN 55027 Feed range longitudinal/cross: 0–20 mm/rev Metric threads: 0.1–400 mm Inch threads: 1/4–56 TPI Tailstock quill diameter: 80 mm Taper: MK 5 MACHINE DETAILS Control: Siemens 810D Electrical data Main drive: 20/17 kW Connected load: 30 kW Dcsdjxqpgfjpfx Agmok Dimensions (L x W x H): 4,000 x 2,300 x 1,800 mm Operating hours: 33,600 hours EQUIPMENT Rapid traverse longitudinal/cross 8-position Sauter tool turret incl. holders Mayfran chip conveyor with coolant system Movable chip guard cover 3-jaw chuck Schunk Rota S 250 Manuals Note: The viewing windows and feed selection levers have been replaced. In addition, an oil change has been performed and the oil filter replaced.

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm arm length ca. 920 mm Dcsdpoztf Ausfx Agmek

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine -Drilling capacity / steel approx. 28mm -Overhang approx. 700mm -Morse taper MK 3 Dcodoztdz Aepfx Agmjk -Speed range 70-1550 rpm - gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Threading device -Hydraulic clamping -Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Dcodpfsu Aa I Sjx Agmok with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), functionality: fully functional, A very well-maintained radial drilling machine, manufactured by TAGO, type M 100, with a swiveling square table. Dsdpfxozrzlco Agmsck Outreach: 1000 mm.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): Dodpfszrr Uusx Agmjck St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Dedpfx Agjvm Akgemeck portable radial