Used Weima Single Shaft Shredder for sale (13,822)

Condition: good (used), Year of construction: 2018, overall weight: 10,000 kg, power: 90 kW (122.37 HP), Single-shaft shredder Amis/Weimar WT15 with discharge belt and overbelt magnet Bwodpfx Ajvgqrxeblsr

Condition: used, Year of construction: 2006, operating hours: 3,000 h, functionality: unexamined, machine/vehicle number: 49291, rotor diameter: 890 mm, rotor length: 1,500 mm, power: 400 kW (543.85 HP), type of input current: three-phase, input voltage: 400 V, An industrial shredder manufactured by ELDAN Recycling A/S, based in Faaborg, Denmark, is available for purchase. This equipment is designed for size reduction of light waste streams, electronic scrap, and non-ferrous metals. -Rotor Mechanism and Cutting Components The processing mechanism consists of a rotor housing containing a main shaft equipped with 18 guide plates and 2 end plates, which are secured by keys. The machine features 36 vertical-flex ring hammers distributed across 4 secondary shafts, providing 2 rings per main guide plate. When the rotor spins, centrifugal force drives these rings into an outward position. When feed material is introduced, the rings dynamically retract between the rotor plates to absorb impact, returning to their outward position once the material passes. The drive torque is transferred smoothly to the shredder via a hydraulic coupling to effectively handle shock loads. -Material Applications and Feed Capabilities The Shredder Type S1500 is engineered to process light waste materials, including: Telecommunication equipment scrap Electronic waste and WEEE Sheet metal, turnings, and general metal scrap Aluminum parts The maximum dimensions for input material are approximately 1000 mm in length, or a maximum surface area of 600 x 600 mm for sheet metal with a thickness of 2 mm. These feed dimensions apply when the machine is operated with screen grates measuring 40 x 105 mm or 25 x 105 mm. Using smaller screen sizes requires a reduction in feed volume to prevent equipment overload. Bwjdjzqywhepfx Abljr -Maintenance and Accessibility Features The shredder housing is split into an upper and lower section connected by standard bolt configurations. The upper section and the attached feed hopper open via hydraulic cylinders, allowing direct access to the rotor for maintenance and inspections. The lower housing contains the impact bars and supports two screen holders, which contain 2 and 3 screen segments respectively. Both screen holders are independently operated by hydraulic cylinders to facilitate quick access and grate changes. The original technical manual covering operating procedures, maintenance instructions, and lubrication schedules is available with the machine. Serial number 49291. Contact for pricing, location details, and inspection scheduling. The following parts are included: - housing - intake hood - chassis - 3 rotors - hydraulic group - electric motor + hydro coupling More photos are available upon request. An on-site visit is possible.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Bodpszhg Eyjfx Ablowr Available from approximately the end of August.

Condition: used, Year of construction: 2024, operating hours: 25 h, Caterpillar engine (kW/HP): 340 / 460 Discharge height: 2,898 mm (tracked version) Bwedozqbhnopfx Ablsr Discharge height: 1,830–4,151 mm (at 35°) Shredding unit: • Screen basket: 250 mm (other sizes available, including 80 / 100 / 125 / 150 / 180 / 250 / 300 mm) • Roller speed (min⁻¹): – Hydraulic drive, max. 32 • Roller length: 2,820 mm • Roller diameter: 610 mm Throughput, depending on the material: up to approx. 60 t/h Weight: approx. 25.7 t Transport dimensions – L × W × H (mm): 6,940 × 2,854 × 3,268 (tracked version) Working position L × W × H (mm): (conveyor belt 35°): approx. 11,372 × 3,290 × 4,151 Further features: Slow-speed, 2-shaft shredder for wood and green waste Very well suited for green waste, tree stumps, and all types of wood waste, as well as old wood Optional screen baskets available upon request: 80 mm round, 100, 125, 150, 180, or 250 mm (among others)

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Bwjdpfozd Srdsx Ablor Equipment, detailed description: see documents.

Condition: excellent (used), Year of construction: 2024, operating hours: 3 h, functionality: fully functional, Single-shaft shredder Vespa 40/60 VGA, manufactured in 2024, 3 operating hours for test run, 16 blades on the shaft, hole size 15 mm, shaft length 590 mm, power 15 kW, weight 1620 kg, serial number 990. Bwodpjzqtdnofx Abler

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm Bedpfx Abozpy Iwslewr - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-rotor pre-shredder (mobile slow-speed machine) in very good condition. Similar design to the legendary DW-3060 "Buffalo". Bwedpfx Aezrd Tijblor Volvo Penta 405kW/550 hp diesel engine, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for speeds up to 80 km/h 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Central lubrication system Wireless remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Direct sale by Hannes Schirnhofer - Schirnhofer Wood Chip Production -

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Bodpfozp H Tyex Abljwr Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: excellent (used), Year of construction: 2013, rotor diameter: 370 mm, rotor length: 1,200 mm, type of input current: three-phase, year of last overhaul: 2026, input voltage: 400 V, WEIMA WL 12 – Single-shaft shredder for plastics For sale: a single-shaft shredder from WEIMA, model WL 12 (or a special version based on this model), designed for shredding plastics. The machine features a robust and durable construction, a hydraulic material feed system, and a drive with a Bonfiglioli gearbox. It is ideally suited for recycling plants, plastics processing companies, and manufacturing businesses. Technical data: Manufacturer: WEIMA Maschinenbau (Germany) Type: single-shaft shredder Working chamber: 1200 × 1200 mm Working length of the rotor: 1200 mm Rotor diameter: approximately 320–370 mm Hydraulic material feed system Bonfiglioli gearbox Rotor speed: approximately 90 rpm Motor power: 37 kW Power supply: 400 V Weight: approximately 3300 kg The machine is designed for shredding PP, PE, HDPE, LDPE, ABS, PS plastics, plastic crates, pipes, profiles, car bumpers, post-production waste, and injection molded parts. The output depends on the type of material and the screen used, and is approximately 500 to 1000 kg per hour. The machine is based on a proven WEIMA design, which is valued for its durability, reliability, and low operating costs. It is possible to inspect and test the machine on site. For any questions, please feel free to contact us by phone. Bwsdpfx Abszqgmpjler

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression - Electrical central lubrication Bwjdpsugf Dwjfx Ablor - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Bwedpfxjzn Icyo Ablor Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, overall weight: 3,800 kg, rotor length: 1,000 mm, power: 18.5 kW (25.15 HP), Single-shaft shredder with discharge screw, ideal for cables, wood, and wood chips. Two screens are available: 15 mm and 20 mm. Hydraulic unit included. The control cabinet has been renewed. The machine was out of operation for approximately 12 years but has been tested and is ready for use. Bodsznn Agjpfx Ablswr

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Bsdpfeznnf Usx Ablewr Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,000 kg, rotor diameter: 400 mm, number of blades: 10, total length: 1,120 mm, total height: 1,950 mm, control cabinet length: 500 mm, control cabinet width: 300 mm, control cabinet height: 1,500 mm, total width: 1,210 mm, rotor width: 600 mm, power: 22 kW (29.91 HP), type of input current: three-phase, sieve perforation: 6 mm, warranty duration: 12 months, input voltage: 400 V, inner dimension width: 590 mm, opening width: 400 mm, Equipment: CE marking, ZERMA GS 400/600 – High-Performance Granulator | Precision. Performance. Reliability. Experience the new ZERMA GS 400/600 High-Performance Granulator in action. In this video, we showcase the key features and design characteristics of our latest granulator generation. The GS series was developed for the highest demands in plastics recycling and combines maximum performance with exceptional reliability and easy maintenance. Highlights ✔️ Rotor diameter: 400 mm ✔️ Rotor width: 600 mm ✔️ Proven ZERMA V-Cut technology ✔️ Optional 3- or 5-blade rotor ✔️ Robust steel construction Bsdpfozmhgiox Ablewr ✔️ Intelligent drop-down cutting system ✔️ External blade adjustment ✔️ Robust bearing assembly outside the cutting chamber ✔️ Optional bypass hopper for long profiles and pipes ✔️ Designed for continuous industrial operation Typical applications * Sprue and injection molded parts + start-up lumps up to 1 kg * Plastic profiles * Pipes * Sheets * Films * Blow-molded parts * Engineering plastics * Production waste * Post-industrial recycling The GS 400/600 stands for precise shredding, high throughput, and long service life – the ideal solution for modern plastics processors and recycling companies.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox BH1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 90kW Drive motor (110kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 84pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Bodpfx Ajzh Eumoblswr Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 78, rotor length: 1,400 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Genox V1500 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 75kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1400mm wide x 400mm diameter Rotor with 77pcs 40mm Concave reversible alloy steel blades. Bsdpfx Abozh Eugolswr Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft. An optional "Long Bed" machine is available which has an enlarged shredding chamber with 1.3m distance between the rotor and hydraulic feeder which is well suited for processing bulky items such as Pallets, Wheelie Bins and IBC's.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 400 mm, number of blades: 45, rotor length: 1,000 mm, power: 45 kW (61.18 HP), rotational speed (max.): 80 rpm, Genox V1000 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 45kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1000mm wide x 400mm diameter Rotor with 45pcs 40mm Concave reversible alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Bwodpfx Aozh Euaebljr Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor length: 2,800 mm, power: 220 kW (299.12 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2800 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 220kW combined motor power (180kW & 264kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2800mm wide x 650mm diameter rotor with 125 pcs, 40mm concave, reversible high quality heat treated alloy steel blades. 60mm blades are also available as an option. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Bsdpfx Abezh Etpslswr Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Standard screen size is 40mm, other sizes can be provided on request.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, rotational speed (max.): 80 rpm, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Bwjdpezh Er Sefx Ablsr 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor length: 2,000 mm, power: 150 kW (203.94 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 150kW combined motor power (110kW & 180kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Bjdpfx Abezh Errslswr

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 400 mm, number of blades: 35, rotor width: 800 mm, power: 37 kW (50.31 HP), rotational speed (max.): 80 rpm, sieve perforation: 40 mm, warranty duration: 12 months, Genox V800 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 37kW drive motor (30kW & 45kW optional) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 800mm wide x 400mm diameter Rotor with 35 pcs x 40mm concave, reversible, high quality heat treated alloy steel blades. Bodpfx Aozh Eq Ijblowr Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft. Standard size is 40mm, other sizes available on request. This machine is in stock at our warehouses in the UK and Germany and is available for immediate delivery.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Bjdpfozh Eqzex Abljwr 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, rotor diameter: 400 mm, number of blades: 55, rotor length: 1,200 mm, power: 55 kW (74.78 HP), rotational speed (max.): 80 rpm, Genox V1200 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 55kW Drive Motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 1200mm wide x 400mm diameter Rotor with 55pcs 40mm Concave reversible alloy steel blades. Bodpfx Aezh Eqnsblowr Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 220 mm, number of blades: 23, rotor length: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 80 rpm, Genox V600 Series - Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 18.5kW drive motor with heavy duty oversized gearbox, 80rpm shsft speed as standard. 600mm wide x 220mm diameter Rotor with 23 pcs x 40mm, concave, reversible, high quality heat treated alloy steel blades. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Bodpszh Ep Rofx Ablswr Output size is controlled by replaceable screens mounted beneath the rotor shaft. Standard screen size is 40mm, others are available on request. This machine is currently in stock at our warehouses in the UK and Germany.