Used Welding Edge - Milling Machine for sale (69,245)

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW Gedpjz Ekkxefx Afuebu MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Grooving width: 1 – 15 mm - Cutter head with reversible cutting inserts - Grooving angle: 30° - 37.5° - 45° - 60° - Power supply: 220 V / 1100 W Gbodpei Ab Unefx Afusu - Dimensions (approx.): W 450 x D 300 x H 350 mm - Weight (approx.): 20 kg - Transport case

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Gbedpfxoxxb Rro Afueu Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm Gbedsx D Tbmepfx Afueu 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW - Space requirement: approx. W 550 x D 500 x H 700 mm - Weight: approx. 65 kg Gbsdpfed Af Shex Afuju

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding Gbedpfxjzv Eaxj Afusu We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: Gjdpfszyah Sex Afujbu - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Year of construction: 2016, condition: ready for operation (used), MFK U.06845 Universal edge and contour milling machine, edge milling machine Motor power: 0.5 kW Speed: approx. 17,000 rpm Chamfer width, stepless: 0-3 mm Table: 280 mm x 300 mm Space required: 280 mm x 300 mm x 205 mm (L x W x H) Weight: approx. 22 kg Year of manufacture: 2016 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Gbodpfx Ajz E U I Usfueu Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges Gbsdpozpblqjfx Afueu - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts Gjdpfeb A Ta Njx Afujbu -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Condition: new, CATALOGUE NUMBER HL001 - New machine, in stock - Preliminary milling - Radius milling + polishing TECHNICAL DATA - Board thickness 45mm - Edge thickness 0.4 mm – 3 mm - Minimum board width 90mm - Minimum board length 90mm - Feed speed 7m/min - Preliminary milling 9000 rpm - Top/bottom 10500 rpm - Front/back 8800 rpm - Polishing 2800 rpm - Motor 6kW - Feed motor power 0.75kW - Preliminary milling motor power 1.5kW Gjdpjzx Rq Iefx Afusbu - Glue spindle motor power 0.25kW - Top-bottom milling motor power 0.18kW - Top milling motor power 0.55kW - Top polishing motor 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor 3-phase 0.12 kW, 1-phase 0.18 kW - Working height of the table 856mm, extended support width 560mm - Dust extraction connection 3x100mm - Dimensions L/W/H 3200/1200/1200mm, weight 660kg Net price: 49900 PLN Net price: 11605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to larger fluctuations)

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz Gjdpfx Afsb A Sy Hsuobu -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Condition: excellent (used), SCM internships in excellent condition Gbjdpst Hkq Rsfx Afueu

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. Godpfx Aozy E D Ssfusbu We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,832 h, functionality: fully functional, machine/vehicle number: 2017058, total length: 7,000 mm, total width: 1,800 mm, overall weight: 5,650 kg, Montresor LOLA 10.8 DX edge grinding machine Gbedpez Rk E Uefx Afuju • Belt running direction: RIGHT to LEFT, year of manufacture: 03/2018, #2017058 • In excellent optical and technical condition – only 4,832 operating hours • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 3 pneumatic lower and 3 upper chamfer supports • Belt infeed: motorized calibrating/profiling support • Belt outfeed: motorized water-jet support • Automatic centralized oil and grease lubrication • Double-row table extension console • Space requirement approx.: 700 x 180 cm, infeed and outfeed path: 200 x 60 cm Optional services available, such as: freight, installation, and training Pricing • EXW from the machine location, plus VAT, subject to prior sale, does not include tools, attachments, and accessories; items shown in the pictures are not included with the machine/scope of delivery. Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold "as is" with exclusion of all warranty claims Inspection possible • at the facility near Rosenheim Availability • after delivery of the new machine, approximately January/February 2027

Condition: like new (used), Edge milling machine for deburring/beveling of various internal and external contours Bevel size adjustable up to max. 10 mm at 45° Cutter 45° / 8 blades double row – KIF/MF. For steel, light metal, stainless steel, cast iron, non-ferrous metals Includes 21 packages of 10 indexable inserts X11.30.35.45 P25 BS TiCN Includes 7 packages of 10 fastening screws for X11.30.35.45 Godpfx Aotwcn Rsfujbu Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Ex works, excl. VAT.

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC Gbodpfx Afszw Et Iousu year of construction 1998 . Model : CB 18 . Series : B20 .

Condition: used, Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling Gbsdpfxob Uhrzs Afusu -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 total power requirement . kW Godpfx Afjucgvasusbu weight of the machine ca. 1,4 t

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available. Gbodovmglzepfx Afuju

Condition: new, Edge and contour milling machine Manufacturer: Assfalg Model: KKE 1 Condition: New machine Speed: 8,000 - 24,000 rpm (continuously variable) Maximum chamfer width: 3 mm Standard equipment includes: - Guide rail - Allen wrench, open-end wrench - Insert ring Ø 30 x 8 mm Gedpfobhfzbox Afujbu - Collet Ø 6 mm with lock nut - Operating manual

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. Gbsdpfjv T Ttfex Afuou - We will help you organize a profitable shipping company or courier.

Condition: new, Aceti Edge Milling Machine, Model 61 A stable, robust edge milling machine for milling visible and weld edges. Chamfer adjustment via handwheel and scale. Table hardened, with clamping, 500 mm long. Axial adjustment of the milling table for full utilization of ISO/DIN indexable inserts. Suitable for all materials, including plastics, by using different indexable inserts. Standard accessories: - Milling head, fully equipped with 10 ISO indexable inserts - Hardened, axially adjustable guides - Chamfer adjustment via handwheel with locking mechanism - Angle adjustment via circular guide, 15-45° - Table design with 4 rubber feet Technical data: Motor: 400 V, 1.1 kW Speed: 2800 rpm Milling table: 500 x 100 mm Milling cutter: 80 mm Chamfer: 0 – 6 mm Gjdpfjiwxwtsx Afuebu Angle: 15 – 45° Weight: 35 kg Incl. 10 pcs. indexable inserts SPUN 1203

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt Gsdpfx Aju Ngfqjfusbu voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Technical details: voltage: 380 V Gjdpsu Ngfdjfx Afuebu total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *