Used Werth Multisensor Coordinate Measuring Machine for sale (67,736)

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine Type: Multi-sensor Coordinate Measuring Machine (optical / tactile) • Year of Manufacture: 2006 • Serial Number: 06-00376 Condition • Used, well-maintained overall condition • Machine was fully operational in measurement use until recently • Regular calibrations documented • No visible damage to granite, guides, or measurement system Accessories / Delivery Scope • Granite-based machine with measurement glass and protective cover • CNC control with Scope controller • Renishaw probe (multiple stylus inserts included) • PC workstation comprising: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and inspection reports • Folder with machine and measurement room documentation • Software and calibration data carriers (CD/DVD) • Integrated control cabinet with main switch Application Area • Form and position tolerance inspection • Dimensional inspection of: • Sheet metal forming parts • Turned and milled components • Tools • Prismatic and rotationally symmetric parts The unit is currently still installed and powered. An inspection while operational is possible by appointment. Dismantling, loading, and transport are to be carried out and borne by the buyer. Lsdpfsx Sw R Dox Ammeac • Measuring range (X/Y/Z): 400 × 400 × 150 mm • Control: CNC • Software: WinWerth, version 8.40 or higher (data carrier included) • Tool holder / probe: Renishaw, MK 2 • Probe system: Renishaw Probe Interface PI 200 • Measurement accuracy: • Length measurement deviation approximately 1.5 µm (according to Werth documentation / calibration records) • Voltage: 230 V AC • Frequency: 50 Hz • Power consumption: max. 10 A

Condition: like new (used), Year of construction: 2015, operating hours: 230 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical data of the HEXAGON OPTIV CLASSIC 321 GL tp measuring machine Year of manufacture: 2015 Ledpsxfzzqsfx Ammoac Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measuring accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Measuring accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume (optical sensor): X 300 mm / Y 200 mm / Z 150 mm Measuring volume (tactile sensor): X 230 mm / Y 200 mm / Z 150 mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Equipment of the measuring machine: • 3-axis microprocessor CNC with vector path control • Metrology software: PC-DMIS Vision • Vision sensor for non-contact measurement of the smallest and most precise components • CCD camera with 6.5x motorized CNC zoom • DC servomotors • TESA probe system (1 body and 1 module) • Modular probe changer: TESASTAR with 4 slots and 4 modules • Linear guides on all axes • Coaxial LED top light (white LED) • LED backlight (green LED + diffuser) • Multi-segment LED ring light • Evaluation computer from Dell included Optional services: Delivery (surcharge) Commissioning (surcharge)

Condition: repair required (used), Renishaw InVia Raman Microscope Spectrometer Complete with MSC20 Encoded Stage Controller RL532C50 HPNIR Laser Source Lajdpfsym Dt Hox Ammec A-9803-0625 CCD 1. The device doesn't come with a software license or computer. We are selling the device as it is. 2. There is a HPNIR785 Renishaw Laser Source installed on the device. Unfortunately we are a surplus seller and do not possess the expertise to test and run this machine for diagnostics. Our intentions are to sell the device for parts and leave a buyer recondition to their required standards. Device is missing some parts to make fully operational. Device is missing Renishaw Ramen Filters as seen in images. Device also is missing original Renishaw Key to open access panel.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm Laedpfxjy R A Ape Ammec manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: excellent (used), Year of construction: 2012, Mitutoyo measuring bench in excellent condition, located in a climate-controlled room at 20°C. Lasdpfx Amozd R D Ejmec Calibrated by Mitutoyo on na regular basis. Availability: 10/2026 SP25M motorized measuring head with PH10MQ probe Tactile and scanning measurement Scanning precision within 2.3µ Measurement precision within 1.7µ +0.4µ per 100mm Max. workpiece weight 1,200kg Granite table dimensions LxW Maximum height under bridge 800mm Software Mcosmos 3 and MiCAT

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We are selling our Keyence XM because we are acquiring a larger machine. The device has been used regularly, but it is too small for our applications, so it is practically like new and in perfect condition. The device is fully equipped and comes with an extension and a tripod. Laedpfxozfik Hs Ammjc

Condition: excellent (used), Manufacturer: DEA Type: DEA record 2305 Year of manufacture: Control / measuring software: TUTOR for Windows Lsdjwv Tvwspfx Ammoac Table surface: 3,050 x 1,600 mm Column gap: 1,680 mm Distance plate – bridge: 1,200 mm Distance plate – probe: 850 mm Travel paths x – y: mm Condition: very good Weight: Dimensions: 4,300 x 2,350 x 3,000 + 1,000 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Coordinate measuring machine with video-based system Ogp Smartscope MVP 300 Year of manufacture: 2012 In very good condition. Technical data: Travel ranges: X: 300 mm Y: 300 mm Z: 150 mm Scale resolution: 0.5µ Dimensions (depth x width x height): 815 x 710 x 800 mm Weight: 140 kg Laodpfezfyzcex Ammjc Further technical data can be found in the photos. The measuring device can be inspected while powered on and in its operating environment.

Condition: new, Year of construction: 2025, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Design Design: Bridge measuring machine Guidance system: High-precision air bearing guides Measuring range X-axis: 700 mm Y-axis: 1000 mm Z-axis: 700 mm Accuracy: 1.7 + l/300 Vectorial acceleration: 1732 mm/s² Vectorial velocity: 519 mm/s Probing system Lasdpfx Amozf H Euemjc Measurement technology: Tactile Type: PH10M / TP20 Equipment Probe changing system: Included

Condition: used, functionality: fully functional, Sales Description – Keyence XM-T1200 including accessories For sale is a high-quality Keyence XM-T1200 3D coordinate measuring machine including extensive accessories. The system is ideal for precise dimensional measurements, quality control, and flexible measuring tasks in manufacturing, toolmaking, and production. The XM series from Keyence impresses with its ease of use, high measuring accuracy, and fast measurement results – even with complex components. Thanks to the optical measurement support and intuitive software, measurements can be performed efficiently and reproducibly. Equipment / Scope of supply Keyence XM-T1200 Control and operating unit Original accessory package Probes / measuring sensors (depending on the configuration) Calibration accessories Software / documentation (if available) Further accessories by arrangement Technical highlights Precise 3D measurements Simple and user-friendly operation Flexible positioning of the measuring sensors Fast commissioning without complex fixtures Ideal for single parts, series production, and quality inspection Condition The machine is in well-maintained and fully functional condition. Maintenance and operation were carried out carefully. An inspection or demonstration is possible by arrangement. Sale Ljdpezdnxyefx Ammjac Location: Hanns-Martin Schleyer Str. 2 // 41199 MG Availability: by arrangement Price: Negotiable / on request If you are interested or have any questions, please do not hesitate to contact us. We will be happy to send you further photos, technical details, and information about the accessories.

Condition: used, Year of construction: 2000, Zeiss Vista measuring machine, manufactured in 2000. Lsdpfxezd Dkxs Ammoac

Condition: used, Year of construction: 2000, Zeiss Vista measuring machine, year of manufacture 2000 Includes Erowa UPC pallet/chuck mounted on the Vista. Ledpfezd Dhkjx Ammoac

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Laedpfxjzc Erps Ammjc Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Lsdpfx Ajxyungommjac Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, total height: 2,320 mm, total width: 920 mm, total length: 1,130 mm, compressed air connection: 4 bar, Equipment: documentation/manual, Aberlink Axiom too 600 CNC CMM Machine Type: CNC Co-Ordinate Measuring Machine Version: Axiom too 600 Year: 2007 Lsdpfxoyap R Rj Ammoac Condition: Like New as had very little use Includes Upgrade to full CNC Auto Temperature Compensation SMC Refrigeration Air Dryer Aberlink Software PC & Monitor Description When the original Axiom CMM was released in 1997 it revolutionised CMM design utilising extremely innovative CMM technology. The Axiom was hugely successful but now Aberlink have taken all the best features from the original model and improved upon them. The Axiom too offers a larger measurement volume and higher accuracy than its predecessor, incorporating the very latest in materials technology. This Axiom too is the 600 size and is full the CNC version. Technical Specifications Measuring Volume: 640 x 600 x 500mm Accuracy: B89 0.008/300mm (VDI (U3) 0.0035 + L/250mm) Measuring System: Renishaw readheads and tape scale Resolution: 0.0005mm Probe System: Renishaw Max Velocity Vector: 500mm/sec Max Acceleration Vector: 1000mm/sec2 Bearings: Air Bearings on all axes Z Axis: Pneumatically counterbalanced Max Balance Weight: 1kg Air Consumption: 23 I/min (0.8 cfm) at 4 bar Required Air Pressure: 4 bar (60psi) Software: Full Graphical Interface designed for Windows Dimensions: 1130 x 920 x 2320mm Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software Lajdpfx Ast Hw S Iemmsc

Condition: like new (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,800 kg, total height: 3,150 mm, total width: 3,255 mm, total length: 1,600 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, overall weight: 4,500 kg, table width: 1,475 mm, table height: 700 mm, table length: 2,830 mm, feed length X-axis: 900 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 800 mm, table load: 1,800 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 1,800 kg, Machinery purchased in 2022 and used for only 250 hours, offered for sale due to business closure. In like-new condition. Technical specifications are attached. Lodjzdnw Nepfx Ammsac

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 00059, measuring range X-axis: 1,500 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,000 kg, Equipment: type plate available, Motorized measuring machine, DEA MISTRAL type. DEA RC1 NEW electronics. Automated, indexed measuring head: RENISHAW PH10M + PAA1 + 1 complete measuring probe with 2 magnetic modules. PC-DMIS CAD DCC software license (mathematical data management with DXF-IGES-DWG-STEP-STL import). Personal workstation + 22" monitor. Desk. Set of styli and extensions. Calibration sphere. Filter unit. Lodpfx Amszdfg Nomoac

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Ledpfsglp Nqsx Ammoac Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm Lajdjy Iub Sjpfx Ammjc - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Wenzel LH87 coordinate measuring machine, year of manufacture 2019. Currently available for inspection in the measuring room. Features a 6-position tool changer with scanning and rotary/swivel measuring head, and active damping in the machine bed. Complete with original Wenzel PC workstation and Quartig software with all options. New price: €110,000. Lasdpfxezcu Tij Ammoc Technical details can be found in the data sheet.

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Lsdezb U Haopfx Ammeac Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm.

Condition: good (used), functionality: fully functional, For sale is a high-quality set of original probe heads and probe changing systems from the renowned manufacturer Renishaw. These components come from a modernization project and are ideal for expanding or as replacement parts for your coordinate measuring machine. Scope of delivery & details on the models: - Renishaw TP200 (probe head): Compact, highly precise switching probe head with strain gauge technology. Perfect for form measurements and extremely repeatable. - Renishaw SCR200 (probe changing magazine): Automatic changing magazine for the TP200 probe head. Enables quick and protected changing of up to 6 probe modules. Laodpfezcxx Njx Ammec - Renishaw ACR3 (auto-joint changing system): Passive changing system for the automatic acceptance of probe heads and extensions. - Renishaw MSR1 (manual changing magazine): Practical, manual storage and changing magazine for up to 6 probe modules.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: P20109164, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,300 kg, warranty duration: 6 months, total height: 3,328 mm, total width: 1,965 mm, total length: 3,300 mm, overall weight: 5,600 kg, Machine parameters The machine features a granite worktable and axes mounted on air bearings. Measuring range of individual axes X-axis: 2000 mm; Y-axis: 1500 mm; Z-axis: 900 mm Machine dimensions Length: 3300 mm; Width: 1965 mm; Height: 3328 mm Weight: Machine: 5600 kg, max. weight of measured part: 2300 kg Lodozdnqpspfx Ammoac Sensing system RENISHAW PH10 sensing head RENISHAW TP20 measuring probe – Alternatively, the machine can be equipped with a Kreon laser scanning head or other components. Software and accessories With the sale of the machine, we will provide an up-to-date license for the Metrolog software and, if necessary, other accessories, according to the customer's additional requirements.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14065, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, total height: 2,320 mm, type of input current: AC, total width: 940 mm, total length: 1,040 mm, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, input voltage: 230 V, travel speed (max.): 60 mm/min, Equipment: type plate available, This machine was refurbished and brought up to its current state in 2020 for €10,600.00. For example: Aberlink joystick with color display. Precise coordinate measuring machine, CNC-controlled, with MH20i/Renishaw probe & software. Fully functional, immediately available. Measuring range X = 640 mm Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Ljdpfxsy Iptcs Ammeac Resolution 0.5 μm Max. workpiece weight 300 kg Max. travel speed 600 mm/sec² Air supply min. 5 bar Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm Type X-axis Y-axis Z-axis Accuracy Max. workpiece weight Year of manufacture 2012 Calibration 2023 The machine is ready for demonstration. The buyer must disassemble the machine and load it themselves.