Used Wieger/Theis Esws 4,5/30 for sale (24,217)

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker design: pendulum cut cutting length: 3.050 mm Lrodpfxsgnywuo Akuol plate width: 1.000 mm plate thickness: 4,5 mm

Condition: used, Year of construction: 1988, sheet width 3000 mm plate thickness 6 mm distance between columns 3100 mm cutting angle 1°15´ no. of strokes 16 Hub/min Lredpfxjvh Ivkj Akujl down holder 16 Stück back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 5,7 t dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop

Condition: used, Year of construction: 1983, pressure 160 t Ljdpfxey Dvmhe Akujrl chamfer lenght 3100 mm distance between columns 2600 mm Center of spindle to wall or column 400 mm stroke 280 mm total power requirement 15 kW machine weight ab. 12.000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 14,200 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 14,100 mm, load per truss pair (max.): 3,050 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45112711-3+) 14.1 m long, 4.5 m high, 1.1 m deep, 5 bays, each 2.7 m wide, 3 beam levels each, shelf load 3050 kg, complete with support grid 1000 kg. - 6 frames (RM3511 - RAL5019) - 12 base plates, shims, and screws Lodpfx Akev Unxlsuerl - 24 ground anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 support grids (ZG8811010004) - 1 collision protection / impact protection (ZRS40901) - 1 load-bearing plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm plate thickness . mm 8mm distance between columns . mm Lrjdpoq Dta Isfx Akuel

Condition: used, Year of construction: 1993, Technical details: Lsdpou Icnfjfx Akuerl sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,300 kg, total length: 82,200 mm, total height: 4,500 mm, clearance between the columns: 3,300 mm, shelf height: 4,500 mm, number of shelf rows: 6, clear span: 3,300 mm, load capacity: 9,900 kg, frame height: 4,500 mm, load per truss pair (max.): 3,300 kg, Pallet Racking System: 2 x single rows + 2 x double rows, each with 4 bays of 3300 mm Lredpfsy N Rpnex Akujl Height: 4.5 m, each with 3 beam levels (clear span 3300 mm) Scope of supply: - 30 uprights, 4.5 m high - 120 base anchors - 6 corner protections - 144 beams, 3.3 m long, 0.13 m high - 24 push-through protections for double rows - 6 load capacity signs - Delivery free to construction site Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Free to construction site / assembly location - Unloading from truck to be carried out by buyer using own lifting device - Deliveries available throughout the territory of the Federal Republic of Germany (except islands). Deliveries to EU countries by individual arrangement. (Hall images are similar)

Condition: new, Rollmak 3-roll round bending machine SME 130-15/4,5 Special equipment included in the price hardened rolls motorized back roll adjustment digital display sheet width 1550 mm sheet thickness 4,5 mm max. sheet thickness 4,0 mm bending roll length 1550 mm roll diameter 130 mm smallest bending diameter 195 mm weight 1210 kg Lrjdpfxslu Erno Akuol dimension L-W-H 2650 x 900 x 1200 mm Motor:2,2 KW Equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: new, functionality: fully functional, Year of construction: 2026, Electromechanical Plate Rolling Machine ESR 1300 x 4.5 mm Asymmetrical 3-Roll Design | Max Thickness: 4.5 mm | Working Width: 1300 mm The ESR 1300 x 4.5 mm electromechanical plate roller is designed for the production of cylindrical and conical shapes with varying diameters. It is suitable for bending sheet metal up to 4.5 mm thick and 1300 mm wide, with a top roll diameter of 120 mm. This model is part of a popular series of 3-roll bending machines appreciated for their simple yet functional construction. Machine Description Asymmetrical roll arrangement for increased flexibility in shaping Top and bottom rolls powered via gear and chain transmission driven by an electric motor Top roll can rotate in both directions and is equipped with a tilting and swiveling mechanism for easy part removal Manually adjustable lower and side rolls for precise bending control Cone bending capability Foot pedal controller with an emergency stop button for safe and convenient operation Technical Specifications Parameter Value Model ESR 1300 x 4.5 mm Max. working width 1300 mm Roll diameter 120 mm Max. sheet thickness 4.5 mm Motor power 2.2 kW Machine dimensions (L × W × H) 1810 × 640 × 1050 mm Approx. weight 660 kg (±2%) Lsdpfx Aow H Rqyskuorl Standard Equipment Foot pedal control unit User manual CE Declaration of Conformity Manufacturer: Cormak

Condition: ready for operation (used), DC Converter, Simoreg Siemens DC-Converter D485/30 Mre-GeE6S22, Used Machine Manufacturer: Siemens Simoreg Model: D485/30 Mre-GeE6S22 Lredpfx Aou U Ilgskusl Overall Dimensions: Length: 270 mm Width: 230 mm Height: 385 mm Weight: 6 kg Electrical Specifications: 3-Phase Input: 3AC; 400V; 25A Output: DC 485V; 30A 2-Phase Input: 2AC; 400V; 5A Output: DC 325V; 5A

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. 9-station high-pile collating machine Complete with 1 pump Lodpoy Sip Esfx Akuerl Max format: 350 x 50 cm

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 Ledpfx Asxnb Agskujrl stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut stream delivery TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Delivery time: immediately from stock

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Lredpfx Aoxnb Hfekuol Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. Lsdeyucwgepfx Akujrl The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Condition Used, commensurate with age. Scope of Delivery Machine as described and shown in the photos. Inspection / Availability Inspection possible by appointment. Immediately available – subject to prior sale.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 Lrodpfx Akjxb Dbxeujl - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included - Continuous operation: same formats as 303 QSM Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 11.20 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 05 x upright approx. 450 cm x 110 cm, pre-assembled. - 16 x crossbar approx. 270 x 14 x 5 cm, T30. - 32 x locking pins. - 32 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2450 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... Ljdpfx Ajy Tvt Tokusrl We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 19.60 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 08 x uprights approx. 450 cm x 110 cm, pre-assembled. - 28 x crossbar approx. 270 x 14 x 5 cm, T30. - 56 x locking pins. - 56 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 4.100 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : Lodpoy Tvtgefx Akuerl When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Lrsdpfx Ajy Tvr Aekuel Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load Lodpfxjy Tvrpe Akusrl - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 14 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x uprights approx. 450 cm x 110 cm, pre-assembled. Ledjy Tvrispfx Akuorl - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x locking pins. - 40 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2.990,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, Year of construction: 1987, cutting dimensions max. 600 x 1000 mm plate thickness max. 3 mm cutting angle 1,5 ° Lrjdpstqql Iofx Akujl side stop electrical adjustable 0 - 1010 mm rear stop electrical adjustable 0 - 610 mm no. of strokes 60 Hub/min total power requirement 14 kW weight of the machine ca. 8,7 t dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails

Condition: excellent (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). Lrodpfowg Hg Rsx Akuel 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar 2. Gas burner WEISHAUPT G11/1-D - 4750 kW, with control cabinet, control unit with gas piping. Output: 900-4750 kW Design: ZMD Year of manufacture: 2004

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 6, shelf height: 5,000 mm, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racking systems + 2 double-row pallet racking systems (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, load capacity 3250 kg. - 30 upright frames (RM5011 - RAL5019) - 80 base plates, shims, and fasteners Lodpjy Tt Diofx Akujrl - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 impact protection/collision guard (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after payment receipt - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual-fuel burner, gas + heavy oil Output: 2300 kW Lrodpfx Akemnqbweuel Year of manufacture: 2008 Please arrange an inspection by phone beforehand! We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. Of course, we will also take care of all formalities. Loading possible.

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: 31 pcs. uprights or frames, height 2,5 m, galvanized 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly on request. Further information on request. (Changes and errors in the technical data, specifications and prices Lsdpfxoccxuis Akusrl and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.