Used Wieger Delta 6/30 for sale (65,165)

Condition: used, Year of construction: 1988, sheet width 3000 mm plate thickness 6 mm distance between columns 3100 mm cutting angle 1°15´ no. of strokes 16 Hub/min Hjdpfx Aevh Ivkjb Tot down holder 16 Stück back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 5,7 t dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop

Condition: good (used), Year of construction: 1982, sheet width . mm working width 4500 mm Hsdpfjq Dta Iox Ab Tjt plate thickness . mm 8mm distance between columns . mm

Year of construction: 2018, condition: like new (used), machine/vehicle number: 228240C0016, We offer this like-new, Delta Neu C1X63 belt-driven RDO 30kW high-performance shredder fan, manufactured in 2018. Manufacturer: Delta NEU Model: C1X63 belt-driven RDO 30kW Year of manufacture: 2018 Power: 30 kW Maximum speed: 2700 rpm Voltage: 3×400 V Hodpfxezn Ulbj Ab Tot If you have any questions or require further information, please do not hesitate to contact us via message or phone. The high-performance shredder fan is in its original packaging and has never been used. A manual/operating instructions in German is available. The machine is located in 59823 Arnsberg.

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker design: hydraulic cutting length: max. 3.000 mm Hjdpfxezdnx He Ab Tot cutting length (stackable): max. 1.000 mm cutting thickness: max. 6 mm

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Hsdpfszi Uq Hex Ab Tet Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide Hedpfxsy Rvfqs Ab Tet See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. Hsdpfx Ajy Sar Dob Tjt - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching

Year of construction: 2024, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, DESTACO pneumatic power cylinder WK3000-30-6-1. Item no. 0576762. Piston force at 6 bar: 3000N. Max. clamping force: 30,000N. Further information available in the images. Purchased in 2024 for testing purposes only. Inspection is possible. Sold without warranty or return. Hjdevb Di Topfx Ab Tot

Condition: used, mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better technical data M 130 Hsdpogrz Hbjfx Ab Tot flow oil: bis 1.050, 1.500, o. 2.100 liter/hour dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1992, Internal item no.: 25086 Surface Grinding Machine Zirsch & Baltrusch Formmaster 6/30 + Magnetic clamping plate 600x300 mm Attention! The grinding spindle is noticeably louder and should probably be replaced in the near future. See video! Technical Data: Maximum grinding area: 650 x 300 mm Electromechanical cross feed: 300 mm Maximum table load: 300 kg Table clamping surface: 650 x 250 mm Maximum distance from table surface to spindle center: 600 mm Grinding wheel dimensions: 400 x 40 mm Travel X: 840 mm / Y: 310 mm Automatic infeed in Z Connected load: 8 kW Installation dimensions (LxWxH): 3500 x 2000 x 2500 mm Weight: approx. 3000 kg Hedextn R Iepfx Ab Tet

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Hedowf Anhepfx Ab Tst Good working condition. Please check out our other listings as well.

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg Hodpsdx R Tfjfx Ab Tjt - Immediately available -

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Hodoixqg Njpfx Ab Tot Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Hsdozxbnqspfx Ab Tjt

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker design: pendulum cut cutting length: 3.050 mm plate width: 1.000 mm Hedpfsgnywujx Ab Tjt plate thickness: 4,5 mm

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device Hodpfx Asmrw U Aeb Tet -Manufacturer: Siemens, compact unit Simodrive -Type: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-0AA0 -Quantity: 1 piece available -Dimensions: 270/170/H290 mm -Weight: 7.3 kg

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Hjdevhvf Tjpfx Ab Tet Whatsapp Whatsapp

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Hjdoztmyuepfx Ab Tst Stator knives: 6 Rotor knives: 9

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Hodpehbyr Ssfx Ab Tjt Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder High-stack feeder, 70 cm SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Spare knife set Hedpfjzrxfgsx Ab Tet Electronic double-sheet, misfeed and stitch wire detection 3 Hohner stitching heads, Universal 43/6 S Compressors Approx. 11.9 million stitches

Year of construction: 1985, condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Hedpfxof I Uume Ab Tjt

Condition: used, Year of construction: 1973, machine/vehicle number: 740048, material width:600 mm material thickness:max. 6 mm no. of straightening rolls:23 straightening roll diameter:30 mm bending speed:10 m/min connected load:4,5 kVA dimensions of the machine ca.:1,00 x 1,80 x 1,60 m weight of the machine ca.:2,45 t Hjdpocxxytofx Ab Tet precision double-roller machine, motorised push-button roller adjustment (divided front/back), forward / reverse roller drive control, manual central lubrication, 2 precision straightening roller-positioning gauges

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, Used LVD PHOENIX FL 3015 Fiber laser cutting machine in excellent condition for sale. This is a dynamic and versatile laser cutting machine designed for precise and fast cutting of various types and thicknesses of metal sheets. The reliable LVD construction, combined with the IPG Fiber laser source, ensures high cutting quality, performance, and low operating costs. The machine is fully functional and can be inspected and tested at our warehouse. Equipment: Automatic exchangeable work tables IPG Fiber laser source – 6 kW 10 kW laser cutting head LVD Touch-L control system Automatic focus adjustment Automatic nozzle changer Automatic nozzle calibration Automatic nozzle cleaning Hodpfx Aszhmtwjb Tet Nozzle magazine with up to 10 positions Automatic sheet position detection Automatic cutting gas selection (oxygen, nitrogen) Cooling system Fume extraction system Sheet cleaning comb Interface with sheet storage Technical specifications Manufacturer: LVD Model: PHOENIX FL 3015 Fiber Year of manufacture: 2017/08 Laser source: IPG Fiber Laser power: 6 kW Operating parameters Maximum sheet size: 3050 × 1525 mm X-axis travel: 3185 mm Y-axis travel: 1560 mm Z-axis travel: 130 mm Maximum table load: 750 kg Table change time: 35 s Maximum X-Y positioning speed: 140 m/min Repeatability accuracy: ±0.025 mm Maximum cutting thicknesses Structural steel (O₂): 30 mm Structural steel (N₂): 8 mm Stainless steel (N₂): 25 mm Aluminum (N₂): 25 mm Copper (O₂): 6 mm Brass (N₂): 12 mm Operating hours Power ON hours: 51,061 h Cutting hours: 24,262 h Application Ideally suited for sheet metal processing companies, metal structure manufacturers, ventilation system manufacturers, and manufacturers in the automotive, agricultural machinery, and other industries that produce precision metal products and require fast, accurate, and reliable laser metal cutting. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0.01mm Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH Hsdpsvntgujfx Ab Tet 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding

Condition: like new (used), functionality: fully functional, CMU Shear 3000 x 8/10 Model 2E0 6/30 Hsdsy R Diwopfx Ab Tet Motorized Backgauge Blade Angle Adjustment Used Machine Internal Code: SER 63