Used Winch Nero X-65H - 1 Piece for sale (123,332)

Condition: new, The Nero X-65H is designed for use with tractors in categories I and II and requires an engine power of 55–65 kW (75–90 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 80 m of cable with a diameter of 12 mm, including end hooks. The winch can accommodate cables up to 120 m / 11 mm diameter or 100 m / 12 mm diameter. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise control from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable inlet brake and speed regulation provide additional protection and controlled operation. The standard equipment also includes a tilt stop, lower cable inlet roller, towing hitch, and chainsaw holder. With a shield width of 164 cm, a depth of 65 cm, and a height of 230 cm including the protective guard, the Nero X-65H is compact enough for use in tight forest areas, but at the same time offers sufficient protection for the operator. - High pulling force: 6.5 t, braking force 81 kN - Flexible cable accommodation: up to 120 m / 11 mm diameter or 100 m / 12 mm diameter - Quick deployment: PTO shaft included, connection Cat. I & II - Efficient & safe: speed adjustable – average cable speed 0.6 m/s, Nwodpfs Abkmrjx Ai Ten - Practical operation: electro-hydraulic cable payout, manual control standard, remote control, emergency control - Additional safety: cable inlet brake - Standard equipment: tilt stop, lower cable inlet roller, towing hitch, chainsaw holder Manual control: yes Average cable speed: 0.6 m/s Speed regulation: yes Lower cable inlet roller: standard PTO shaft: included Tilt stop: yes Product dimensions with protective guard: 230 × 164 × 65 cm Towing hitch: standard 3-point hitch: Cat. I & II End hook: yes Pulling force: 6.5 t Tractor power: 55-65 kW (75-90 hp) Braking force: 81 kN Product dimensions without protective guard: 175 × 164 × 65 cm Cable payout: electro-hydraulic Chainsaw holder: standard Clutch discs: 4 Cable included: 80 m / 12 mm diameter Emergency control: yes Drive: PTO shaft Shield width: 164 cm Cable accommodation possible up to: 120 m / 11 mm diameter or 100 m / 12 mm diameter Cable inlet brake: yes

Condition: new, The Nero X-55M is designed for use with tractors in categories I and II and requires an engine power of 45–55 kW (60–75 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 11 mm, including end hooks. The winch can accommodate cables up to 110 m / Ø 10 mm or 90 m / Ø 11 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The mechanical cable payout and standard manual control allow for precise operation from a safe distance. With a shield width of 152 cm, a depth of 53 cm, and a height of 230 cm including the protective grid, the Nero X-55M is compact enough for use in confined forestry areas, but at the same time offers sufficient protection for the operator. As standard, the equipment includes a lower cable inlet roller, a towing device, and a chainsaw holder. - High pulling force: 5.5 t, braking force 69 kN - Flexible cable capacity: up to 110 m / Ø 10 mm or 90 m / Ø 11 mm - Quick deployment: PTO shaft included, connection cat. I & II - Efficient & safe: average cable speed 0.6 m/s - Practical operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 152 cm, depth 53 cm, height 230 cm incl. protective grid - Standard equipment: lower cable inlet roller, towing device, chainsaw holder Chainsaw holder: standard Towing device: standard Cable included: 70 m / Ø 11 mm Average cable speed: 0.6 m/s 3-point linkage: Cat. I & II Manual control: standard Lower cable inlet roller: standard Njdpfx Aio Abkmfo Tjwn Tractor power: 45–55 kW (60–75 hp) Product dimensions without protective grid: 152 × 152 × 53 cm Clutch discs: 3 Braking force: 69 kN End hook: yes Product dimensions with protective grid: 230 × 152 × 53 cm Shield width: 152 cm Drive: PTO shaft Cable capacity up to: 110 m / Ø 10 mm or 90 m / Ø 11 mm Pulling force: 5.5 t Cable payout: mechanical PTO shaft: included

Condition: new, The Nero X-35M is designed for use with tractors in categories I and II and requires an engine power of 25–35 kW (34–48 hp). Thanks to the standard-equipped PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 9 mm, including end hook. The winch can accommodate cables up to 90 m / 9 mm or 75 m / 10 mm. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and the standard manual control allow for precise operation from a safe distance. With a shield width of 122 cm, a depth of 49 cm and a height of 210 cm including protective grille, the Nero X-35M is compact enough for use in confined forestry areas, but still offers sufficient protection for the operator. Standard equipment includes a lower cable inlet roller, towing hitch and chainsaw holder. Nodpfj Abklujx Ai Tjwn - High tensile force: 3.5 t, braking force 44 kN - Flexible cable accommodation: up to 90 m / 9 mm or 75 m / 10 mm - Quick deployment: PTO shaft included, compatible with categories I & II - Efficient & safe: average cable speed 0.9 m/s - Practical operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 122 cm, depth 49 cm, height 210 cm incl. protective grille - Standard equipment: lower cable inlet roller, towing hitch, chainsaw holder Manual control: Standard Chainsaw holder: Standard Drive: PTO shaft Shield width: 122 cm Product dimensions with protective grille: 210 × 122 × 49 cm Braking force: 44 kN Cable included: 70 m / 9 mm Cable accommodation up to: 90 m / 9 mm or 75 m / 10 mm 3-point linkage: Cat. I & II Cable payout: mechanical Product dimensions without protective grille: 130 × 122 × 49 cm PTO shaft: included Tractor power: 25–35 kW (34–48 hp) End hook: yes Average cable speed: 0.9 m/s Towing hitch: Standard Tensile force: 3.5 t Clutch discs: 1 Lower cable inlet roller: Standard

Condition: new, The Nero X-85H is designed for use with tractors in categories I and II and requires an engine output of at least 59 kW (80 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 90 m of cable with a diameter of 13 mm, including end hooks. The winch can accommodate cables up to 120 m / Ø 12 mm or 100 m / Ø 13 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise control from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable infeed brake and speed control provide additional protection and controlled operation. Nodj Abkmxopfx Ai Tjwn The standard equipment also includes a tilt stop, a lower cable infeed roller, a hitch, and a chainsaw holder. With a shield width of 184 cm, a depth of 65 cm, and a height of 230 cm including the protective grille, the Nero X-85H is compact enough for use in confined forestry areas, but at the same time offers sufficient protection for the operator. - High pulling force: 8.5 t, braking force 106 kN - Flexible cable capacity: 120 m / Ø 12 mm or 100 m / Ø 13 mm - Quick deployment: PTO shaft included in the scope of delivery, connection Cat. I & II - Efficient & safe: Speed adjustable - average cable speed 0.6 m/s - Practical operation: electro-hydraulic cable payout, manual control standard, remote control, emergency control - Additional safety: cable infeed brake - Standard equipment: tilt stop, lower cable infeed roller, hitch, chainsaw holder Manual control: yes Emergency control: yes Clutch discs: 4 Chainsaw holder: standard Product dimensions without protective grille: 175 × 184 × 65 cm Hitch: standard Product dimensions with protective grille: 230 × 184 × 65 cm Shield width: 184 cm Braking force: 106 kN Cable capacity up to: 120 m / Ø 12 mm or 100 m / Ø 13 mm Tractor output: from 59 kW (80 hp) Pulling force: 8.5 t Cable infeed brake: yes Lower cable infeed roller: standard Cable payout: electro-hydraulic Cable included: 90 m / Ø 13 mm Drive: PTO shaft Speed control: yes End hook: yes PTO shaft: included in the scope of delivery Average cable speed: 0.6 m/s 3-point linkage: Cat. I & II Tilt stop: yes

Condition: new, NERO X-55H Winch – Powerful forestry winch for professional timber extraction The NERO X-55H has been developed for demanding applications in forestry, agriculture, and timber extraction. Thanks to its robust construction, high pulling force, and modern control technology, this winch is ideal for the safe pulling and moving of logs, even under difficult operating conditions. The electro-hydraulic cable payout system enables comfortable and efficient operation. The standard radio remote control ensures precise control from a safe distance and increases comfort and operational safety in daily use. The sturdy design guarantees high load capacity and a long service life. Additional safety features such as a cable payout brake, speed regulation, and emergency operation support controlled work in the forest and on uneven terrain. The 3-point linkage allows for quick and secure mounting of the winch on the tractor. The standard equipment, including a chainsaw holder, drawbar, and protective guard, makes the X-55H a reliable piece of equipment for professional users. Powerful forestry winch for professional applications 5.5 t pulling force for efficient timber extraction Electro-hydraulic cable payout system Radio remote control for comfortable operation Robust and durable steel construction Cable payout brake for added safety Speed regulation for controlled operation 3-point linkage for quick tractor connection Includes drawbar and chainsaw holder Typical applications Forestry Timber extraction Agricultural operations Forest maintenance Firewood harvesting Professional forestry work Cable capacity up to: 110 m / Ø 10 mm or 90 m / Ø 11 mm Cable payout brake: yes End hook: yes Braking force: 69 kN Cable payout: electro-hydraulic Product dimensions with protective guard: 230 x 152 x 53 cm Emergency operation: yes Tilt stop: yes Product dimensions without protective guard: 152 x 152 x 53 cm Manual operation: yes Cable included: 70 m / Ø 11 mm Nwodpfe Abkmlox Ai Ten Average cable speed: 0.6 m/s PTO shaft: included Speed regulation: yes Lower cable payout roller: standard Drawbar: standard Pulling force: 5.5 t Shield width: 152 cm Drive: PTO shaft Tractor power: 45–55 kW (60–75 hp) Clutch discs: 3 3-point linkage: Cat. I & II Chainsaw holder: standard

Condition: new, The Nero X-45M is designed for use with tractors in categories I and II and requires an engine output of 35–43 kW (48–60 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 70 m of cable with a diameter of 10 mm, including end hook. The winch can accommodate cables up to 110 m / 10 mm diameter or 90 m / 11 mm diameter. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and the standard manual control enable precise operation from a safe distance. With a shield width of 142 cm, a depth of 53 cm, and a height of 225 cm including the protective grid, the Nero X-45M is compact enough for use in tight forestry areas, but also offers sufficient protection for the operator. The standard equipment includes a lower cable inlet roller, a drawbar, and a chainsaw holder. - High pulling force: 4.5 t, braking force 56 kN - Flexible cable capacity: up to 110 m / 10 mm diameter or 90 m / 11 mm diameter - Quick deployment: PTO shaft included, compatible with categories I & II - Efficient & safe: average cable speed 0.9 m/s - Convenient operation: mechanical cable payout, manual control as standard - Robust & compact: shield width 142 cm, depth 53 cm, height 225 cm including protective grid - Standard equipment: lower cable inlet roller, drawbar, chainsaw holder End hook: yes Clutch plates: 1 Drawbar: standard Manual control: standard 3-point hitch: Cat. I & II Shield width: 142 cm Chainsaw holder: standard Cable included: 70 m / 10 mm diameter Product dimensions without protective grid: 142 × 142 × 53 cm Cable payout: mechanical Nedpj Abkl Uefx Ai Town Lower cable inlet roller: standard PTO shaft: included Drive: Power take-off Braking force: 56 kN Average cable speed: 0.9 m/s Maximum cable capacity: 110 m / 10 mm diameter or 90 m / 11 mm diameter Pulling force: 4.5 t Tractor power: 35–43 kW (48–60 hp) Product dimensions with protective grid: 225 × 142 × 53 cm

Condition: new, Description The 6-piece portable winch forestry accessory kit is the ideal complement to your winch for forestry work. It contains everything you need to carry out your tasks efficiently and safely. The kit includes: 1x PCA-1295: Choker chain 6mm x 2m, with C-hook and pin Nodpfx Ae Adh E Dsi Town 1x PCA-1290: Log dragging tool for logs up to 50 cm in diameter 1x PCA-1260: Polyester sling 60 mm x 2 m, with a minimum breaking strength (MBS) of 2180 kg 1x PCA-1282: Parallel hook with safety latch and 3 chain links 1x PCA-1276: Oval steel snap hook, MBS 25 kN 1x PCA-1274: Stainless steel pulley, 90 kN MBS, for 6-13 mm ropes

Condition: new, Description Equipped with a powerful motor that can be adjusted to three speeds, the PCW3000-Li can be used both indoors and outdoors, down to -14°C (6.8°F). It features a brushless electric motor that can be tilted 360°. It is a direct drive, meaning there is no clutch. Njdo Adh H Ujpfx Ai Tjwn Depending on the selected speed and the weight of the load being pulled, the battery provides 20 to 40 minutes of continuous pulling without any loss of power. It is always ready for use and requires no maintenance when not in operation. Included in the set: 1x PCW3000-Li: Battery-powered pulling winch, max. pulling force 1000 kg 1x PCA-1205M: Polyester rope, 10 mm x 50 m, 2200 kg MBS 1x PCA-1360: "ROPEWIZER" heavy-duty thimble for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley, 60 kN MBL, for 6-10 mm ropes 2x PCA-1276: Oval steel carabiner, MBS 25 kN 1x PCA-1281: Rope end hook with safety latch, MBS 750 kg 1x PCA-1260: Polyester sling, 60 mm x 2 m, MBS 2180 kg 1x PCA-0231: 82V quick charger with active cooling 1x PCA-0206: 82V lithium-ion battery with Bluetooth - 2.5 Ah capacity 1x PCA-1350: Polyester round sling, 2.50 m

Condition: new, Description The VP12 Vogesenblitz log splitter offers a splitting force of 12 tons and is powered via a power take-off (PTO) with a 37-liter pump. It is a compact splitter with a lowering cylinder for a transport height of 1.90 m and features a three-point linkage of categories I and II. The easy-to-use two-hand safety control, two splitting speeds, and the rapid piston return ensure efficient operation. With an ergonomically shaped splitting wedge, a splitting blade length of 245 mm, and an interchangeable splitting blade, it can be used in a variety of applications. It complies with the safety standard EN 609-1 and is supplied including a mechanical log lifter. Additional holders for a splitting maul and axe, as well as brass guides and a robust powder coating, complete the equipment. Nwsdo Adldwepfx Ai Tsn - 12 tons splitting force - Drive via PTO, 37-liter pump - Compact splitter with lowering cylinder (quick release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety control - 2 splitting speeds - Rapid piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Interchangeable splitting blade - Complies with EN609-1 incl. mechanical log lifter - Holder for splitting maul & axe - Brass guides - All-steel base plate - Powder coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety device - Cable Ø 6 mm (Overall height in transport position with winch ~213 cm) Opening width (cm): 108 Speed 2 (cm/s): 25.6 Pump capacity (L/min): 37 Splitting force (tons): 12 Pump: Single Piston return (cm/s): 18.9 Drive: PTO drive Speed 1 (cm/s): 11.4 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Tank capacity (L): 28

Condition: new, Description Enhance your winch with the Portable Winch Accessory Set for hunting winches and be perfectly equipped for hunting and off-road adventures. The set includes: Nodpj Adh E Rofx Ai Tswn 1x PCA-1290: Drag chain for logs, max. diameter 50 cm 1x PCA-1295: Choker chain, 6 mm x 2 m, with C-hook and clevis 1x PCA-1260: Polyester sling, 60 mm x 2 m, MBS 2180 kg 1x PCA-1282: Safety hook with locking mechanism and three chain links 1x PCA-1276: Oval steel snap hook, MBS 25 kN 1x PCA-1274: Stainless steel pulley, 90 kN MBS, for 6-13 mm ropes

Condition: new, This winch mounting plate is ideal for attaching a winch to a tree or mast. It allows for installation at the required height and automatically aligns the winch. This makes it easier to perform longer tasks from the same location. Weight: 4 kg Nodpfx Ao Adh D Hei Tswn Strap: 50mm x 3m Dimensions L x W x H: 47 x 15.5 x 13 cm Material: Galvanized steel Tree/mast diameter: 30 cm to 91 cm (12'' to 36'')

Condition: new, Description Nwodpfx Aie Adlb Aj Ten The VPE22 Vogesenblitz log splitter offers a splitting force of 22 tons and combines a PTO drive with a robust, quiet cast iron pump and an electric motor (400 V/6.6 kW) with a double pump. It meets the safety standard EN 609-1 and impresses with its simple two-hand operation, two splitting speeds, and a splitting length of 115 cm. The cylinder stroke of 105 cm can be lowered without tools. A patented mechanical log lifter with automatic locking is included as standard. Other features include a full steel base plate, quick piston return, an ergonomically shaped splitting wedge, and a replaceable splitting blade. The holding claw is 9-way adjustable, and the log splitter is suitable for three-point hitches of categories I and II. The powder-coated surface ensures durability. - 22 tons splitting force - Combined PTO drive with cast iron pump and electric motor 400 V / 6.6 kW with double pump - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter included as standard, with automatic locking - Full steel base plate with beveled edges - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left-hand control lever with 9-way adjustable holding claw and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point hitch cat. I and II - Holder for axe and hatchet - Powder-coated Hydraulic winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety - Cable Ø 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / Retract / Extend), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pin plug - In the event of a power failure, the valve can also be switched manually. (Total height in transport position with winch ~213 cm) Ram return speed (cm/s): 17.7 / 15.4 Pump: Single / Double Opening width (cm): 115 Speed 2 (cm/s): 23.3 / 24.8 Pump output (L/min): 69 / 58 Speed 1 (cm/s): 11.4 / 8.0 Tank capacity (L): 62 Dimensions (H x L x W cm) (*Working position - Transport position): 264-202 x 155 x 150 Splitting force (tons): 22 Drive: PTO drive and electric motor 400 V

Condition: new, Use with the square tube (PCA-1267), the mounting kit for a trailer hitch (PCA-1266), or the tree/post support plate (PCA-1263). This winch support plate is ideal for attaching the winch to your vehicle or to the tree/post support. It is vibration-damped and can be rotated 45 degrees to the left/right, which stabilizes the winch and aligns it with the load. Ideal for prolonged work at the same location. Nsdo Adh Dyepfx Ai Tjwn

Condition: new, for AMR forestry tool box. Nwodo Adf Rqepfx Ai Tsn

Condition: new, for Vogesenblitz wood splitters, 20/25 tons. Nwsdps Adidhefx Ai Ton

Condition: new, for Vogesenblitz wood splitters, models 12/16. Nwedpfj Adidbsx Ai Ton

Condition: new, The expansion of the new winch generation from Holzknecht, featuring the classic design with a cable drum installed transversely to the direction of travel, enables a large cable core diameter (resulting in low traction power loss), a wide cable drum, and, in conjunction with a cable winding arm, provides perfect cable spooling. - 6.5 tons pulling force at the drum core - 4.5 tons pulling force at the top cable layer - Electro-hydraulic control with self-contained oil supply - Optimal price-performance ratio - Standard equipment includes Holzknecht radio remote control "Autec" - Standard equipment includes tilt-stop system - Standard equipment includes hydraulic cable payout with cable infeed brake - Drive via bevel gearbox with reinforced duplex roller chain with load-switching safety clutch and automatic brake - Three-point frame made of welded steel construction (steel ST 52) - Shield width 1,750 mm - Folding protective grille - Low weight of 440 kg - Clean cable spooling due to cable distributor - Transversely mounted cable drum (in the cable direction) - Low cable infeed, height of the cable infeed roller 1,200 m - Incl. forestry cable 80m/11mm, highly compacted, Flemish eye with swivel hook - Maximum cable capacity 100m/10mm or 85m/11mm - Incl. storage compartment, chainsaw & axe holder - Cable infeed speed 26 m/min - For tractors from approx. 30 kW Nedpfx Aio Adg Svs Town Pulling force 6.5 tons Max. cable length 100m/10mm or 85m/11mm Cable infeed speed 26 m/min Shield width 1,750 mm Cable infeed height 1,200 mm Weight 440 kg For tractors from 30 kW Advantages of the hydraulic cable payout with cable infeed brake: 1. Cable payout at the push of a button 2. No overrun of the cable drum 3. Always cleanly spooled cable (even when lowering loads) 4. No cable pinching due to permanent pre-tension 5. Extreme reduction in workload 6. Extended cable life Radio remote control "Autec" - Functions: Pull, release, short release, throttle +/- , engine start & engine stop, switch for cable payout - Scope of supply: Transmitter incl. antenna, receiver, 230V+12V charger, hip belt for transmitter

Condition: new, 100m / 10-strand hammered rope Holzknecht Funk Standard Nedj Adg S Aepfx Ai Tswn The new generation of winches from HOLZKNECHT features the classic design with a rope drum installed transversely to the direction of travel, enabling a large rope core diameter, a wide rope drum, and, in combination with a rope winding arm, perfect rope spooling. Tractive force 6.6 tons Max. rope length 100m / 11mm diameter Rope infeed speed 26 m/min Shield width 1,750 mm Rope infeed height 1,250 mm Weight 450 kg For tractors with 35 kW and above

Condition: new, Flagpole H8mxD90mm, hard aluminum, anodized, with rotating boom and internal raising mechanism. · 1-piece, with rotating boom · with telescopic boom, diameter 40 mm, adjustable from 100-1500 mm, for flags with a hem · with plastic loops for attaching to the flagpole · Raising mechanism: internal Nedpfx Ae Adcztji Town Diameter: 90 mm Material: hard aluminum, anodized Height above ground: 8 m Features: with rotating boom

Condition: new, Flagpole H9mxD90mm, hard aluminum, anodized, with internal hoisting mechanism. · 1-piece · Cylindrical profile · Internal hoisting mechanism, lockable access opening Nsdpfx Ae Adc R Ioi Tswn · With plastic loops for attachment to the flagpole · Vandal-resistant cable system Material: Hard aluminum, anodized Height above ground: 9 m Hoisting mechanism: Internal Diameter: 90 mm

Condition: new, Flagpole H9mxD90mm, hard aluminum, anodized, with rotating boom and internal hoisting mechanism. · 1-piece, with rotating boom · with telescopic boom, Ø 40 mm, adjustable from 100-1500 mm, for flag fabrics with a hem · with plastic loops for attachment to the mast · in Nsdpfx Aio Adczye Tswn Features: with rotating boom Height above ground: 9 m Hoisting mechanism: internal Material: hard aluminum, anodized Ø: 90 mm

Condition: new, Loading ramp, aluminum, L2400 x W1000 mm, 450 kg * Aluminum, suitable for installation in vehicles * Ideal for tradespeople and freight forwarders * The loading ramp, permanently mounted in the vehicle, facilitates loading and unloading * Simple operation with minimal effort Njdpfs Aclxrox Ai Tewn Weight: 60 kg/piece Load capacity: 450 kg Material: Aluminum Width: 1000 mm Length: 2400 mm

Condition: new, for replacing the wedge, for Vogesenblitz horizontal wood splitter 33 tons. Nwjdpfxo Adiiwj Ai Tjn

Condition: new, Loading ramp, aluminum, L3000 x W400 mm, 590/pair kg · For loading and unloading light equipment · Lightweight and easy to handle – quick to store Nwjdj Aclyispfx Ai Tsn · For compensating height differences · Non-slip surface for safe use · Available in length L 2000 Load capacity: 400/pair kg Weight: 22 kg/piece Length: 3000 mm Length when folded: 1515 mm Height difference: 600 mm Material: Aluminum Width: 400 mm

Condition: new, Safety cabinet, type 30, H1947 x W1164 x D620 mm, anthracite grey/safety yellow, all-metal doors, ASECOS · For the safe and compliant storage of flammable hazardous materials in accordance with DIN 14470-1 and TRGS 510. Fire resistance: 30 minutes, GS-tested. · External height: 1947 mm Containment volume: 33 l Internal height: 1626 mm Internal depth: 519 mm Doors: safety yellow Weight: 240 kg Body: anthracite grey External width: 1164 mm Internal width: 1050 mm External depth: 620 mm Nwjdpfj Acug Sex Ai Tsn