Used Wire Hübner Glf 100/13 Tdp 0,2 T-4 for sale (107,008)

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW Lhodpfx Aeq Rxz Tjmtei -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: ready for operation (used), Hübner TDP 0.2LT-4 analog tachogenerator + Hübner FSL centrifugal switch SN: 1567501, used, minor signs of wear, 100% functional, delivery as per photos. Ljdpfxjx Dubuj Amtohi

Condition: ready for operation (used), Siemens 1HC5106-0EJ16-1RU7-Z Motor SN: E0T86884001004 with Hübner Long Life Tacho TDP 0.09LT-3 - Z = A11 / G30 / K18 (radial shaft seal, oil-tight (oil-tight flange) - IP65), used, in good condition, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Lhedpfx Ajx Dvd Rjmtei

Condition: used, maximum load weight: 660 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2025, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 1,125 mm, total width: 1,510 mm, total height: 1,125 mm, A64 GWN01572722 Low-loader trailer Unsinn, type WEB T 2111-7-13, tarpaulin and frame, internal height 125 cm, gross vehicle weight 750 kg, 100 km/h, Vehicle not prepared Ljdpfx Amoyqdmzstshi Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2013, operating hours: 379 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Lhodpfx Amezaf D Tetoi Mast: X + i - 120 - 3F6250 ID: 26024.4241 Category: Demo Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Capacity: 1250 kg Year: 2013 Hours: 379 hours Battery: 48 V / 750 Ah - Year of manufacture: 2021 Options: - Very Narrow Aisle (VNA) truck - With wire guidance - WIDE fork carriage (L = 1200 mm)

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 26021.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lhsdpfx Aszaf Avemtsi Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1657 hours Battery: Complete NEW * 48v / 750ah * Manufactured in 2026 Options: - VNA truck - with Wire Guidance – in complete LIKE NEW condition!!

Condition: like new (used), Year of construction: 2021, operating hours: 1,750 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 26021.6260 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Lhjdpfjzaf Apex Amtei Capacity: 1250 kg Year: 2021 Hours: 1750 hours Capacity: Complete NEW * 48v / 750ah * Year of manufacture 2026 Options: - VNA truck - with Wire Guidance, complete, LIKE NEW

Condition: used, maximum load weight: 2,735 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,260 mm, loading space width: 2,040 mm, total width: 2,100 mm, total height: 990 mm, A23 GW26M0147488 Lsdpoy S Nkpofx Amtshi High-loader with manually operated hand winch (removable), fitted with overrun brake, wooden floor plate, rear drop-leg supports (accessory), 2 loading ramps behind the license plate... and many more features. Subject to errors and prior sale.

Condition: like new (used), Year of construction: 2020, operating hours: 3,431 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID: 26077.5577 Category: Used Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Ljdezkqi Ijpfx Amtjhi Capacity: 1250 kg Year: 2020 Hours: 3431 hours Battery: Complete NEW * 48v / 750ah * Year of manufacture 2026 Options: - Narrow aisle truck - With wire guidance

Condition: like new (used), Year of construction: 2020, operating hours: 3,306 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID: 26078.0578 Category: Used Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Capacity: 1250 kg Year: 2020 Lodpfxjzkqh Do Amtjhi Hours: 3306 hours Battery: Complete NEW * 48v / 750ah * Manufactured in 2026 Options: - Very Narrow Aisle (VNA) truck - with Wire Guidance

Condition: good (used), machine/vehicle number: 0106, Year of construction: 2005, Dana 1204FT20213-100 from Uniktruck Lhjdpoyug Ucefx Amtsi

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Lhsdewlkb Njpfx Amtei Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), Ifsys Ljdpfxezd Rk Es Amtshi Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x return conveyor belt 2 x control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) Lhjdpfx Amszdp Icotji (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-58645 L1 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Ljdpfxol Eckve Amtshi

Condition: new, Siemens 840C 6FC5110-0CB01-0AA0 PLC-CPU135WD SN: T-FO604200, unused in sealed original packaging, 100% functional, delivery as per photos. Ljdpjy Nr S Rofx Amtshi

Condition: ready for operation (used), Heidenhain UV 101B power supply unit Id. 317 559-13 SN:10084979, the item has been completely overhauled and comes with a 3-month warranty, used, normal signs of wear, 100% functional, delivery as per photos. Lhsdpfx Ajx Etipemtji

Condition: new, Weiss 175342 spindle motor designation mW13.5/15.5-4 DBL.311002 EN60034, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lhodpfx Amsy Rcmujtji

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 101B, part no. 317 559-13, SN: 10084979, offered in exchange (exchange service). The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return part must not show any mechanical damage, such as breakages, as these are not repairable. If such damage is present, an additional charge of €400 incl. VAT will apply. Lhjdpfxsx Etiis Amtsi

Condition: like new (used), Year of construction: 2020, operating hours: 3,797 h, load capacity: 1,250 kg, lifting height: 6,250 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F6250 ID: 26077.0574 Category: Used Mast: 3F6250 Forks: 1200 mm Lowered height: 2920 mm Lifting height: 6250 mm Capacity: 1250 kg Year: 2020 Hours: 3796 hours Capacity: Complete NEW * 48v / 750ah * Year of manufacture 2026 Lhsdpfx Aezaf Rmjmtji Options: - Very Narrow Aisle (VNA) truck - with Wire Guidance

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5461 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Lsdpfx Amszafr Dstshi Capacity:1250 kg Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2017, operating hours: 4,602 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413 X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5462 Cat.:Used Mast:3F6000 Forks:1000 mm Lodpfx Ajzafrwemtshi Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4602 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Lhodpjhbal Djfx Amtoi Travel X-axis: approx. 400 mm Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm Lhedpfx Ajzn Hcxemtei - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm Ledszn Hcfjpfx Amtshi - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.