Used Wittmann Drymax C30 - 30- P for sale (58,001)

Year of construction: 2004, condition: excellent (used), Dryer Wittmann Drymax C30-30-P Year 2004 Iedpfx Anjumnknowjth Conveyor units year 2005 2 pieces available

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Itedewr Nnbjpfx Anweh

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Itsdpfx Ajy Rnrienwoh Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: like new (used), Year of construction: 2019, operating hours: 950 h, functionality: fully functional, clamping force: 1,800 kN, screw diameter: 55 mm, clearance between the columns: 710 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, mold height (min.): 300 mm, opening stroke: 650 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 10,500 kg, Injection molding machine for processing PVC-H. Conversion for processing PS/PP/PA etc. can be offered upon request! warehouse no.: 503679 manufacturer: Wittmann Battenfeld type: Smart Power XL 180-1330 controller: UNILOG B8 year of construction: 2019 operation hours: 950 h clamping force: 1800 kN distance between tie-bars h x v: 710 x 660 mm size of mould plates h x v: 950 x 955 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 55 mm swept volume: 653 ccm injection pressure: 2041 bar equipment included Itodpfxjyu Ih Ro Anwjh screen text german CEE-socket 16A core pulling hydraulically 2x air valve 1x machine with material hopper PVC-U injetion unit Schuko-socket 10A measures of machine l x w x h: 5.5m x 1.8m x 2.3m total weight: 10500KG

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Itsdpoyi Ailsfx Anwjh Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric Itsdpfxeu Eki So Anwsh

Condition: used, Reportedly unused SGL Carbon type ECH-EC3-07B-1P/P carbon block heat exchanger. Approximate heat transfer area of 10.2sqmt. Space 1 rated 2 bar maximum allowable pressure at 170 deg.c. Space 2 rated 5 bar maximum allowable pressure at 130 deg.c. Itodpjzfifwefx Anwsh

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm max. module --- min. module --- Control --- total power requirement --- kW Iodpfx Aneya Eqaswsth weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Flow rate: 5,000 L/h Weight: 180 kg The unit is ready for immediate shipment and is available immediately! Itsdpfxsy Nif Is Anweh

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser Iedpsxgukbjfx Anweth - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² Itsdexmagzopfx Anwjh feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 6,5 x 4,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - OPTIONALLY available without pallet changer

Condition: like new (used), Year of construction: 2026, power: 3 kW (4.08 HP), pressing force: 30 t, stroke length: 150 mm, operating speed: 10 mm/s, reverse speed: 70 mm/s, throat depth: 255 mm, ram plate length: 1,270 mm, Equipment: CE marking, documentation/manual, safety light barrier, Standard Equipment Stroke: 150 mm Distance Between Upper and Lower Dies (Daylight): 265 mm Throat Depth: 255 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Machine Features Double-cylinder upper beam bending system Steel frame construction providing high static and dynamic rigidity Upper beam movement supported by fiber slide bearings High-strength balancing shaft and eccentric bearing system supporting parallelism Motor-controlled angle adjustment with a mechanical stroke system inside the cylinder Wide opening and high stroke suitable for use with different dies Easy tonnage adjustment and bottom dead center stop via NC control Hydraulic safety system against overpressure Dual-speed operating system consisting of free descent, bending, and fast return CE-compliant, multi-functional foot pedal with emergency stop Compact hydraulic power unit, top-mounted, with HAWE or Rexroth components Siemens, Pizzato, and Balluff electrical components LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program Program transfer via USB Standard upper and lower die set NC-controlled motorized X-axis back gauge (500 mm) Itodpfx Anszcl S Njwoh Back gauge system with linear slides 0.2 mm positioning accuracy Motor-controlled Y-axis angle adjustment Mobile control panel Front support arms with linear slides Lower die centering bolts Programmable, precise back gauge retraction function Optional Equipment Motorized R-axis Special bending dies Special pedal system with dual-hand + foot control DSP or Fiessler safety systems Extended back gauge distance Additional back gauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 30 tons Maximum Bending Capacity: 4 mm Bending Length: 1270 mm Distance Between Columns: 1010 mm Stroke: 150 mm Bending Speed: 10 mm/s Free Descent Speed: 70 mm/s Throat Depth: 255 mm Distance Between Upper and Lower Dies: 265 mm Table Width: 130 mm Table Height: 830 mm Main Motor Power: 3 kW X-Axis Motor: 0.55 kW Y-Axis Motor: 0.18 kW Optional R-Axis Motor: 0.25 kW Back Gauge Distance: 500 mm Oil Tank Capacity: 90 L Machine Length: 1780 mm Machine Width: 1375 mm Machine Height: 2160 mm Machine Weight: 1700 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Condition: excellent (used), Dissolver VMA Getzmann Dispermat LC 30 Power: 0.3 kW Isdpfx Asycb H Nonweth Speed range: 0–20,000 rpm Toothed disc: 50 mm Accessories on request Very good condition, directly from production!

Condition: used, Colour: Grey Dimensions (LxBxH): 125 x 50 x 100 cm - Documentation available: No - CE certificate present: No - Voltage [V]: 24 - Current consumption [A]: 5.5 - Transport dimensions: 1250mm x 500mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Itsdpfx Anjyymnuewoh Yorick Diebels

Condition: used, axle configuration: 2 axles, loading space length: 74,600 mm, loading space width: 22,700 mm, loading space height: 13,800 mm, Year of construction: 2000, Equipment: ABS, = Additional Options and Equipment = - Rear air suspension - Front air suspension = Notes = Itsdjy Srukjpfx Anwoh For vehicle inquiries, please contact Mr. Seidel (by phone). Trailers LTD SDC 30/2 tipping trailer. Additional rear work lights, BPW axles, Wabco ABS, drum brakes, first axle liftable, central lubrication, air suspension, tire tread depth: 1st axle 11-15mm, 2nd axle 9-13mm, cargo area dimensions: length: 7,460mm, width: 2,270mm, height: 1,380mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For further information, please visit our website. ... Errors, changes and prior sale excepted!!! = Further Information = gross vehicle weight: 30,000 kg Please contact Tobias Ebert for more information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2004, total length: 9,560 mm, total width: 2,450 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,690 mm, color: other, Year of construction: 2004, Axle configuration Tyre size: 385/65 Make axles: ROR Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 9000 kg Ijdpfx Aey Nlf Ronwoth Weights Empty weight: 3.860 kg Carrying capacity: 34.140 kg GVW: 38.000 kg Identification Registration number: OH-84-RS

Condition: used, Year of construction: 2019, Used Filling Machine Dairy AL AMANE Aman Pack C30 – 2019 The new machine Aman Pack C30 is a filling machine of high performance, reliable and economical use, simple to use and maintain, which comes meets the needs of different customers, with the following characteristics: Low operating costs, high efficiency. Iodpjvguz Rsfx Anwsth Machine designed with easy operator access.  Stainless steel that meets European standards: 304L stainless steel frame. All parties having contact with milk are in 316L stainless steel. Connection to CIP system possible. High and efficient production rate of 2800 cartons per hour for the 500 ml. Compact. The types of packaging dosed by the used filling machines Aman Pack C30 available in different sizes from 120 ml to 500 ml.

Year of construction: 1980, condition: good (used), SHIKI model PC 30, year 1980, 1x letterpress (2 colors); laminating unit; punching unit; longitudinal cut, 2 hot foil plates, in a good condition, immediately available Ijdjh I D Dnjpfx Anweth

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, 🔶 P SYSTEM P300 – PELLET PRESS 30 kW USED – REFURBISHED BY THE MANUFACTURER Industrial pellet press P System P300 – 30 kW, complete with control panel, refiner, and dedicated hydraulic power unit. Used machine, refurbished by the manufacturer, ready for installation and/or integration into a complete pelletizing plant. Compact, sturdy, and reliable solution for the production of pellets from sawdust and fine biomass. 📊 Main technical data Main motor: 30 kW Output: up to 350 kg/h* Material: sawdust and fine wood chips Required moisture content: 13–14% Typical energy consumption: • approx. 25 kWh at 250 kg/h of pellets • approx. 30 kWh at 300 kg/h of pellets *Productivity and power consumption may vary depending on material type, particle size, and moisture content. ⚙️ Included configuration ✔ Control panel ✔ Refiner ✔ Dedicated hydraulic power unit ✔ P System industrial frame 🔧 Possible upgrades • Pellet discharge screw conveyor • Mini-silo, feed conveyor, or container for raw material collection • Magnetic separator • Additional refiner • Dust recirculation filter • Pellet collection hopper • Manual or automatic bagging system 📍 Immediate availability (subject to prior sale) 📦 Condition: used – refurbished by the manufacturer 🚛 Delivery: ex works (EXW Cremona, Italy) 💰 PRICE Iodpfx Aoyk Etvenwjth €39,250.00 + VAT (ex works – EXW Cremona, Italy)

Condition: new, Year of construction: 2025, Cellophaning machine for wrapping rectangular, round or oval products. The Cello Wrapper is designed primarily for cellophaning multiple products into one package, for example 10 rice cakes. In addition to cylindrical shaped products, oval or rectangular shaped products can also be cellophaned. The packaging process includes automatic feeding, stacking, wrapping of products, cutting and unloading of the final package. PLC from OMRON, touch screen from WEINVIEW, switches and buttons from SIEMENS. Module for tear thread and an inkjet printer are included. - Specifications: max. speed of the machine in neutral: 30 cycles/minute; product dimensions* diameter (80-100); length final packing: 50-220mm; power: 220V, 4kW; compressed air consumption:0.03m³/min; dimensions packing machine (length of feeding belt can be customized): L4200xW1080xH1820mm; weight: about 1000kg. * Refer to cylindrical products. Itjdjv Nkx Depfx Anwoh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Iedpfx Anju E E A Tswsth Very good condition. Available immediately.

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm Itodpfxeimwp Se Anwjh 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: ready for operation (used), - USED - 3D MEASURING MACHINE X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 1200 mm TABLE SIZE: 3000 x 1500 mm Itjdjwt Euyjpfx Anwjh NOTE: TOUCH PROBE RENISHAW MH8/TP2

Condition: good (used), 12-head drilling machine for sale, Iedpfx Ajpy D Dwenwjth Table size: 400 x 360 mm

Condition: excellent (used), Year of construction: 2011, 2x ARBURG A 170 S 180-30 Trennebene (S&P 3798) Manufacture year: 2011 Operating hours: 38,396 Stunden Screw: 15 mm Injection pressure: 2200 bar Stroke volume: 10,6 cm³ Clamping Force: 18 t Tie bar distance: 170 x 170 mm Mould installation height min.: 150 mm Plate distance max.: 350 mm Dimensions: 2600 x 1400 x 2000 mm Eeight: 1720 kg Isdpfx Aozdf S Senwsth Connected load: 11 + 4 = 15 kW price: on request Option parting line, hotrunner 6x, Robot Interface EM67, Interface Colorizing, corepuller, crane 350 kg Price: on request contact: Mr. Ralf Schulz