Used Wma Wmp 08 for sale (4,516)

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* Kjdpfx Akeq H Aqxjwedt * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Kedpfx Akjxrb Tgewodt Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: like new (used), Water-cooled spot welding unit, mobile Rated power at 50% duty cycle: 100 kVA Kdodpfxjhlhh Ao Akwst Secondary short-circuit current: 9.5 kA Secondary open-circuit voltage: 14-18 V with secondary cable for welding electrode and counter electrode, 3000 mm long Synchronous welding control with pulse operation T-1050 / 8 Main switch Weight: 300 kg

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm Kdedpozx S Iuefx Akwet MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, overall weight: 600 kg, plate width: 60 mm, plate length: 80 mm, resolution (max.): 2,540 dpi, TECHNICAL DETAILS Exposure method: Direct laser exposure (computer-to-screen) Resolution: up to 2,540 dpi Maximum screen size: 600 × 800 mm Suitable for: common CTS emulsions Plate width: 60 mm Plate length: 80 mm MACHINE DETAILS Input voltage: 240 V Dimensions & Weight Ksdjzy Intepfx Akwodt Dimensions (L x W x H): 1,670 x 820 x 930 mm Total weight: 600 kg EQUIPMENT Computer Keyboard Monitor Mouse Machine software with configuration and adjustment options Accessories and maintenance tools

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Robot Cobot Universal Robots UR5 - Year of manufacture 08/2020 Year of manufacture: 2020 Serial number: 2020350779 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Kodpfozmumcox Akwedt Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – Please specify country, city, and postal code. Freight costs upon request – Please specify the delivery address.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04L/9012, Offer Number: M04L/9012 Kdjdpeyi Dmfofx Akwet Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: SKM 08 Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: In our warehouse

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production. Kdodpfeyxv Ihox Akwjt

Condition: used, Year of construction: 2008, Automatic machine for closing bottles with ROPP metal caps. The machine features smooth speed and output adjustment. Manufacturer: Z.M. ROBAK (POLAND) Model: AZR 08 Number of capping heads: 8 pcs Output: 2000 - 12000 bottles per hour (bph) Total power: 2.7 kW Year of manufacture: 2008 Weight: 2000 kg Used machine, in working condition. Kjdpfozl Ichjx Akwjdt

Condition: used, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 270 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 450 mm, controller manufacturer: Siemens, controller model: 840DSL, spindle speed (max.): 36,000 rpm, Spindle Speed: 36,000 rpm Power: 2.3 kW Kedpfx Aezgckiekwsdt Tool interface: HSK-E Tool changer: 24 stations Working area Travel in X: 270 mm Travel in Y: 310 mm Travel in Z: 450 mm Rapid traverse (X/Y/Z): 75 m/min C-axis Type: NC rotary table Diameter of rotary table: 245 mm Robot Type: Variocell UNO Equipment 5-axis milling package Lasercontrol 40NT Measuring probe Automatic loading and unloading system Variocell UNO

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand large-format scanner, the “WideTek-36-600 Scanner” Item for sale: 1 x WideTek-36-600 Scanner Condition: Kdjdpfjz A Axcex Akwot This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Kdsdpfszf Admsx Akwst Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: used, functionality: fully functional, Year of construction: 2022, Used, but in good condition! Ready to be shipped. Kodpfez Dvb Hex Akwedt

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Kodpfx Akszumnzowsdt Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04I/9012, Offer Number: M04I/9012 Machinetype: pointing machine Ksdjwzkn Ijpfx Akwjdt Info: vibratory feeder Make: HILGELAND Type: SKM 08 Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: Germany

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Kdedpfx Aoywmzijkwst Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Steuerungsmodell: 21m 3x / 2x 21iM Kühlmittelzufuhr:1 bar Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total width: 2,510 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,880 mm, color: blue, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - EBS (Electronic Braking System) = Further information = Axle configuration Tyre size: 385/65R22.5 Axle make: BPW Kdedpfx Aszr D I Hokwet Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,750 kg Payload: 33,250 kg Gross vehicle weight (GVW): 39,000 kg Identification Registration number: OP-52-HT

Condition: used, mileage: 264,000 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 6,360 mm, total width: 2,240 mm, total height: 2,980 mm, Year of construction: 2009, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, 1st owner. Well-maintained vehicle. Inspection and TÜV (German vehicle inspection) recently performed. All-wheel-drive ambulance Mercedes Sprinter 515 CDI with WAS box body. Euro 4 engine, 4-cylinder, 2148 ccm / Green environmental badge. 6-speed manual transmission. 148 km/h. All-wheel drive can be engaged via a button. Wheelbase: 3665 mm. CD radio. GARMIN navigation. Automatic climate control (Tempmatik). Airbags for driver and front passenger. Auxiliary heater Eberspächer Hydronic D10W (diesel heater). ABS and ASR. ESP. Rearview camera with monitor. Exterior mirrors and power windows. Central locking via remote key. 2 original Mercedes remote keys plus 2 manual box body keys included. Previously registered as "Other motor vehicle, ambulance, closed ambulance". Last registered with green license plates. With emergency warning system. Overall vehicle dimensions: Length 6.36 m. Width 2.24 m. Height 2.98 m. Unladen weight according to vehicle documents: 3785 kg. Permissible total weight: 4600 kg. Electrically extending step at the sliding door on the right side of the box body. 5 registered seats, including 3 emergency seats for accompanying personnel in the box body, plus 1 cot. DUNLOP winter tires from 2015 with snowflake symbol, all in good condition, twin tires at the rear. Kdjdpjzztm Rjfx Akwot TÜV valid until 08/04/2026, valid until August 2027. Last inspection at 263,224 km, with oil changes for engine, transmission, front axle, and rear axle. This Sprinter initially operated in regular ambulance service and then only occasionally with the "Ambulance Support Group" in recent years. Despite the limited use, it was always maintained and parked in a garage to ensure full operational readiness until the last day of use. The Sprinter was deregistered by the first owner on 09/07/2026, and after that, it was driven to us without any problems over 700 kilometers on the highway. No error messages or other malfunctions, the car works perfectly. Interior clean. Appearance is quite appealing for its age. Air conditioning is said to be weak according to the driver. 1 boot of the lower right suspension arm is damaged (status GM "minor defect" during TÜV inspection. Otherwise, the inspection report is without defects). This offer is only valid for commercial businesses and freelancers of all kinds and from all industries, as well as for authorities and emergency services of all kinds. Direct sale to private end users is unfortunately not possible. Subject to prior sale and errors. The selling price is the final price/amount gross = net. The differential tax rate according to §25a UStG applies. This means that the VAT cannot be deducted separately and is not due additionally.

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:200271N284, used, normal signs of use, 100% functional, delivery as shown in photos. Kdedpfxoz Acugj Akwet

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:287171N094, used, normal signs of use, 100% functional, delivery as per photos. Kodpfxoz Acumo Akwodt

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Kdedpoy Ekncefx Akwjt Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Kodpfx Akoz A Tdpowodt Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: used, axle configuration: 3 axles, first registration: 07/2016, color: other, Year of construction: 2016, Empty weight: 5.325 kg Axle 1: left 12 mm right 12 mm Kedsu Au Tcopfx Akwjdt Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 12 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum mold opening: 900 mm Opening stroke: 500 mm Platen diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & weight Machine dimensions L x W x H: 4.11 m x 2.65 m x 4.81 m Total weight: 22000 kg Equipment Screen text, German Screen text, English CEE socket 16A Hydraulic core pull, 4x Kdodpfx Aez A Tb Ujkwet Air valve 1x Machine with rotary platen Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: used, Year of construction: 2003, MANUFACTURER: ALUP Kdedpfx Akeyi D Hrewst MODEL: SCK 101-08 Serial number: 217586 Year: 2003 Power (kW): 75 Capacity (m³/min): 12.9 Pressure (bar): 8