Used Wmw Upw 25 for sale (15,814)

Condition: used, Recently arrived WMW UPW 25 7800 Euro, free loaded on your truck Cjdpfx Ajygm Igecmerf

Condition: used, Recently arrived WMW UPW 25 Only 7900 Euro (free loaded on truck) Cedpfoygm Hvjx Acmorf

Condition: good (used), Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders -Manufacturer: WMW, clamping cylinder stroke 20 mm Crjdpfxjwzills Acmjf -Type: 25 TGL 30-7311 -Shaft Ø 14 mm -Number: 16x clamping cylinders available -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 15 mm -Type: 25 30-7312 -Shaft Ø 14 mm -Number: 12x clamping cylinders available -Price: per piece Cjdpfowziiksx Acmjrf -Dimensions: Ø 50 x 96 mm -Weight: 1.2 kg/piece

Condition: used, bore capacity in steel (diameter) 40 mm Crsdjx Iwgkspfx Acmjf continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. Csdpfozh Dtzsx Acmjrf The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Credpfxetzwxde Acmsf Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, power: 12.5 kW (17.00 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,400 kg, distance between stands: 800 mm, PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. Crjdpjtzxvwjfx Acmsf It is possible to make a visual inspection and check the machine in motion.

Condition: used, Technical details: width: 625 mm depth: 520 mm height: 820 mm weight of the machine ca.: 300 pro Stück kg 2 pieces available (price per piece) without T-slots Oblong hole Ø 33 x 330 mm Cjdsu S H Stopfx Acmjrf *

Condition: used, Technical details: pressure: 25 t Cedpfx Acjvc Awxemerf stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t Crjdpfemi Rpiox Acmof

Condition: used, functionality: fully functional, Column drilling machine Credpfx Acsy A Sz Semof Tool holder MK 4 With gear transmission, quill feed.

Condition: good (used), Column drilling machine: WMW Saalfeld Type BK 25 Year of manufacture: 1963 Spindle taper: MK 4 Credoyx Uk Uspfx Acmof Drilling capacity: 32 mm Table: 800 x 600 mm Feed

Condition: used, Thread rolling machine UPWS 25. Credpjzd Rf Njfx Acmsf

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Crodpfx Acsx U Ectjmjf Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers Credpfx Acezly Rqsmjf diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1975, pressing force: 250 t, stroke length: 140 mm, table width: 750 mm, table length: 1,000 mm, Pressure: 250 t Throat: 400 mm Crjdpfx Aszlnnwscmof Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, pressing force: 250 t, stroke length: 500 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Crjdpfx Aszlnndecmof Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, functionality: fully functional, TRAPANO RADIALE USATO 40X1250 WMW REVISIONATO A NORME. Cjdpfx Acjzky Imomerf

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Crodpjd Ew T Ajfx Acmof -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate Cedsdu U T Uspfx Acmorf -T-slot plate comes from: a WMW drilling machine -Travel: approx. 1200 mm -Clamping plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm Cjdpfx Aedq Tt Hjcmorf -Through hole: Ø 80 mm -Weight: 24 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 Csdpfsg Rcy Tsx Acmsrf -Weight: 24 kg

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Spindle head: Spindle tool for table boring mills, plate boring mills, tilt adjustable Credpfxekkzx Tj Acmsf -Stroke: 225 mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm Codpfx Aed Itcqscmorf -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg