Used Wmw Zerbst Facing Lathe for sale (6,966)

Condition: ready for operation (used), Facing lathe DP 2000 Ncsdpfxjv Hx R Ns Abzsw Chuck diameter 2000 mm Length 3500 mm weight approx. 22 tons

Condition: used, Year of construction: 1975, Technical details: faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Headstock with faceplate and main drive 2x support Tailstock Ncedevbhiqspfx Abzjw Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. *

Condition: good (used), total length: 2,035 mm, total width: 1,565 mm, plate height: 255 mm, Manufacturer: ZERBST Type: DP1 / S2 & DP2 / S3 & DP3 / S3 Year of manufacture: 1988 Specifications Metric US Standard Nodpswp H Awjfx Abzjcw Length 2035 mm Width 1565 mm Height 255 mm Weight per plate approx. 1200 kg Number of matching pieces 4 Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details.

Condition: used, Year of construction: 1961, faceplate diameter 3500 mm turning diameter 4000 mm centre distance 16000 mm Nodpoyqvczsfx Abzjcw turning speeds 0,71-33,5 U/min Rest 2 max. workpiece weight -without tailstock 6300 kg max. workpiece weight between centres 18000 kg total power requirement 31 kW weight of the machine ca. 60 t dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Nodpfx Asyvt H Asbzjcw Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, Year of construction: 1982, Technical details: Ncjdpfx Aowtctyjbzsw faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: used, Year of construction: 1992, faceplate diameter 1200 mm turning diameter 1520 mm turning speeds . U/min max. workpiece weight -without tailstock 6000 kg max. workpiece weight between centres 25000 kg turning diameter in the pit 3200 mm Control Siemens turning length 1200 mm main drive 70 kW total power requirement 70 kW Ncedpjzfwt Nefx Abzew dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), diverse lathe chucks and face plates as shown in the pictures Njdpefr T N Uofx Abzecw

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Ncjdpjwvir Iefx Abzsw Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe ZERBST - DPS 1400 MACH-ID 582 Make: ZERBST Type: DPS 1400 Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Nedpowvirhefx Abzjcw Spindle bore: 100mm

Condition: excellent (used), Model 6 P, 3150 mm Engine output: 38 kW, 52 hp Ncedpfx Ajyr S D Dsbzow

Condition: excellent (used), Planspiral chuck Auto Strong Diameter 310 mm Camlock size 8 Taper diameter 139.735 6 stud diameter 25.4 Pitch diameter 171.4 Chuck height including flange 135 mm Weight 53 kg Njdpfjln Uixex Abzecw

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Nedpfx Absy Hgnzezscw Machine number: 3318/61 Type / Model: DLZ 355 Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. Nsdpfx Abeu Ix Sgozscw spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block Nsdpfxou Axzkj Abzocw No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: used, Year of construction: 1941, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 860 mm, turning length: 2,500 mm, center height: 400 mm, workpiece weight (max.): 10,000 kg, spindle bore: 57 mm, total length: 5,100 mm, total width: 1,860 mm, rotational speed (min.): 6 rpm, rotational speed (max.): 250 rpm, Equipment: documentation/manual, For sale: Oerlikon DM4S conventional lathe, manufactured in 1941. Dimensions: Nedpfx Asy Taplebzocw Estimated weight: 10 tons Center height: 400 mm Footprint: 1860x5100 mm Distance between centers: 2500 mm Spindle bore: 57 mm Options: Multi-fix turrets 4-jaw chuck/faceplate Ø1050 mm Rapid traverse Many accessories… Inspection and testing possible at 1822 Chernex, Switzerland. Price: €10,000 (negotiable) Travel and transport costs are the responsibility of the buyer. More photos and videos are available upon request. Please contact me for further information.

Condition: ready for operation (used), functionality: fully functional, center height: 700 mm, center width: 800 mm, spindle speed (max.): 240 rpm, bed width: 700 mm, overall weight: 10,000 kg, TECHNICAL DETAILS Swing diameter over bed: 1,400 mm Swing diameter over cross slide: 640 mm Centre height: 700 mm Distance between centres: 800 mm Bed width: 700 mm Spindle bore: 80 mm Spindle speed: 110 – 240 rpm MACHINE DETAILS Power: 11.5 kW Control: Conventional Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,500 x 2,500 mm Net weight: 10,000 kg Njdsy Hhitepfx Abzecw EQUIPMENT Digital readout Quick-change toolholder

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Ncodpfx Ajywzxiobzow - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Condition: used, Year of construction: 2008, Out of valve production * Ncodpfxjynkgvo Abzsw

Condition: used, faceplate diameter 2000 mm turning diameter 2500 mm turning speeds 0,5-100 U/min max. workpiece weight -without tailstock 6000 kg max. workpiece weight between centres 25000 kg turning diameter in the pit 3200 mm total power requirement 55 kW dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ncjdpfx Asyqtgqsbzow If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1968, functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Nsdpfxjr Nzm Te Abzecw Diameter face plate: 1.500mm incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.

Condition: ready for operation (used), Centre height: 700 mm Njdpfoyn Ed Njx Abzscw Centre distance: 1800 mm Max. swing diameter over bed/in gap: 1300/1740 mm Turning diameter over cross slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Cross slide adjustment: 350 mm Electrical connection: 380 V, 6.6 kW Weight approx.: 5.5 t Required space: 3800 x 1600 x 1700 mm

Condition: good (used), Year of construction: 1971, turning diameter over bed 1070 mm turning diameter over slide rest 800 mm turning length 1000 mm turning dia. in gap 1450 mm faceplate 1000 mm length of gap 150 - 650 mm spindle bore 80 mm spindle turning speed range 4,25 - 190 U/min feeds 0,05-2,8 / 0,03 - 1,7 mm/U drive motor 11 kW swing dia. 1450 mm Ncsdpfx Abeyq Smpozjw total power requirement 13 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,1 x 1,3 x 1.6 m

Condition: used, turning diameter over slide rest 800 mm Ncodpfx Aev H Etdobzow Control Siemens 802D swing diameter 2000 mm centre height 1000 mm

Condition: used, Year of construction: 1970, faceplate diameter 2000 mm turning dia. in gap 2400 mm length of gap 200- 630 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 5- 180 U/min centre height over plate 1140 mm diameter of main spindle 285 mm spindle bore 90 mm Control S 840 D max. workpiece weight 5000 kg max. torque on the faceplate 3000 Nm total power requirement 57 kW Ncsdpfx Absydqpcjzsw weight of the machine ca. 20 t dimensions of the machine ca. 5,5 x 3 x 2,8 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.