Used Wolf Vpc 250 for sale (12,607)

Condition: used, Year of construction: 2019, Vertical packaging machine (VFFS) with servo drives and Videojet printer This Wolf VPC 250 is a vertical form-fill-seal machine built in 2019 by Wolf Verpackungsmaschinen. It forms bags from reel-fed film, fills and seals them, and can be combined with multihead weighers, linear weighers, auger fillers and other dosing systems. According to the specifications for the VPC 250 series, it makes bags of approx. 50 to 250 mm wide and 80 to 450 mm long, from film up to approx. 600 mm wide, with a fill volume of up to approx. 6 litres. What is achievable depends on the installed forming set, the product and the film. The machine has a Siemens SIMATIC touchscreen with PackML control, SEW drives and servo-controlled functions, dual vacuum-assisted film pull belts, a photocell for printed film and an integrated knife. The front and rear cross seals and the vertical seal each have their own temperature control. An integrated Videojet DataFlex 6320 thermal transfer printer prints dates, batch numbers and barcodes directly onto the film. Spare film pull belts and parts are available with the machine. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vertical form-fill-seal machine (VFFS) Bag width: approx. 50–250 mm Bag length: approx. 80–450 mm Max. film width: approx. 600 mm Max. fill volume: up to approx. 6 litres Controls: Siemens SIMATIC touchscreen, PackML Drives: SEW, servo-controlled Printer: Videojet DataFlex 6320 (thermal transfer) Construction: Stainless steel Lhedpoz I Inaefx Amzjn Machine number: 2511

Condition: used, Year of construction: 2026, in use with combination 03/08 WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soils, trenches, slopes, and backfills in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Lhedpfxjzv Rd Ns Amzsn Safety: No personnel have to stand directly in the trench. Important areas of application and functions: Trench construction + utility zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult locations. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg What is a compaction roller used for? Lhedpezw Ngxefx Amzsn A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid Lhsdpez Rl D Eefx Amzon

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Ljdju Dxb Tjpfx Amzehn Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Lhodpezn N H Tofx Amzsn

Condition: used, CARL WOLF WDK 65, three-sided tipper, permissible total weight: 8,000 kg, hydraulic extension slide at the rear, steel side walls, trailer coupling at the rear, pivoting side walls, inertia brake, tires: 12.5/80-18. Offered price including 19% VAT. The location may change, please inquire about the current location before visiting. Subject to changes, errors and prior sale. Lhjdpfo Ad Adnox Amzjn

Condition: used, Year of manufacture: 2013 Colour: Grey Price: On request - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 - Number of rotating knives [pcs.]: 0 Lhsdswz Nxxspfx Amzsn - Number of fixed knives [pcs.]: 100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Lsdpsz Sm Ddofx Amzjhn Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: used, Year of construction: 2020, Mixing rotor M80X - grain size mm Blocks in the wear zones with armor wire welded on with adapter OQ70/55 Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Ledpfxe Ad Niqs Amzehn Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil flow 150 - 200 l/min The TSP.154 - the bearings are maintenance-free and the chain housings contain grease that is distributed by the movement of the blade and the rotation of the chain, ensuring lubrication at every point. Therefore, the Terra-Star TSP.154 does not require additional lubrication and is maintenance-free. Dimensions and weight without adapter

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Lhsdpfx Amez Snfcszen Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: excellent (used), color: other, General information Year of construction: 2023 Technical information Attachment suited for: Excavators Empty weight: 1.080 kg Dimensions (LxBxH): 113 x 152 x 98 cm Functional Capacity: 38 m³/h Bucket capacity: 0,7 m³ Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good Ledpfsz Rvlmsx Amzjhn Hydraulically driven screening/separator bucket for screening and separating soil, stones, roots, and other materials, suitable for excavators from 10t or loaders from 6.5t, Steelwrist SQ60 quick-change adapter, working width 1200mm

Condition: used, functionality: fully functional, Year of construction: 2018, stroke length: 250 mm, overall weight: 17,500 kg, power: 26 kW (35.35 HP), input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, pressing force: 250 t, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Bystronic Xpert Pro 250/3100 press brake, manufactured in 2018. Model: Xpert Pro 250/3100 Year of manufacture: 2018 Serial number: BY041049 Working length: 3100 mm Maximum pressing force: 2500 kN Maximum stroke: 250 mm Weight: 17500 kg Main motor power: 22 kW Total connected load: 26 kW Ljdpo Adt S Nofx Amzjhn Operating voltage: 3-phase 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current of the upstream fuse: 80 A Maximum pneumatic operating pressure: 8 bar Maximum hydraulic operating pressure: 310 bar Self-assembly and ex works. If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls Lsdpfx Ajztad Tjmzohn smooth sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless central lubrication feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approximately 1800kg – made in Italy – DTR documentation – robust machine – multi-blade saw, used, very good condition Net price: 25900 PLN Net price: 6023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Meat Mincer Düker-Rex AW 98 / 1400 Complete V2A stainless steel construction. In very good condition with sorting device. See photos. Year of manufacture: Würzburg 07 / 2021 Machine is plug-in ready and workshop-tested. Further details upon request. Ljdpfxoynkb He Amzjhn Payment by cash or advance bank transfer. Sale only to commercial buyers. No warranty, no liability.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. Ljdpewcgr Eofx Amzjhn New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 30160328026, power: 210 kW (285.52 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, nominal power: 210 kW (285.52 HP), This CHP unit comes from an investment that was never put into operation. Lhedpfsyzcxrox Amzsn

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Ljdpfx Asyt Emnemzohn Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 2050456, We are selling a Magnaflux magnetic particle inspection set (Magnaflux GmbH, Germany). It is new and has not been used since its manufacture in 2020. Lhedpfxoz R R Epe Amzjn 1. Magnaflux ETT 250 demagnetizing tunnel with conveyor belt Year of manufacture: 2020. Serial number: 2050447 Power supply: 400 V / 50 Hz, 1.8 kVA, 4.4 A Ampere-turns: 3.4 kAW. Protection class II Tunnel effective window: [150 × 200 mm] Belt: [2700 mm] long, [200 mm] wide SEW-Eurodrive WAF20 DRN71MS4 geared motor, 0.25 kW, i=48, IE3 Electrical panel and connecting cable included 2. Magnaflux rotary inspection table with bottom extraction Perforated plate with Ø [1300 mm] Integrated centrifugal extractor in the base 4 workstations with padded armrests Side supports for lamps or accessories Rotation: [manual / motorized] Ideal for MT/PT fluorescent inspection in a UV cabin Lot price: [€8,500]. Also sold separately: tunnel [€5,000], table [€3,500]. Prices are negotiable, plus VAT. Collection in Erandio (Bizkaia, Spain). We can assist with loading and transportation.

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Lodpfx Ajz S T Injmzshn Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Year of construction: 2026, Mixing rotors with block discs BS252 Fine screening - grain size 0 - 35/40 mm Blocks in the wear zones with armored wire welded on Adapter Likufix SW48 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil flow 150 - 200 l/min - Mixing in lime or mixing agents for drying the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, shredding, and turning biomass, organic waste, and compost while simultaneously separating branches, roots, etc. that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating fragments of mm, larger and harder parts remain in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain housings contain grease that, due to the movement of the bucket and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not need to be re-lubricated and is maintenance-free. Lodpfx Amjz S E Slozehn Dimensions and weight without adapter.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220113, total length: 3,500 mm, total height: 2,500 mm, total width: 1,500 mm, overall weight: 12,500 kg, feed length X-axis: 3,000 mm, input voltage: 400 V, type of input current: three-phase, We offer this used CNC edge banding machine, Otinus WC67Y-250/3200, manufactured in 2022. Manufacturer: Otinus Model: WC67Y-250/3200 Year of manufacture: 2022 Machine type: CNC edge banding machine Bending compensation If you have any questions or require further information, please send us a message or contact us by phone. Lhodpfx Ame Adgrpezen

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Lhjdpfx Amsyrczgszjn Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Lhsdpfxjhktq Ao Amzen Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Lodpfx Amezyubyozehn Consumption: 302 kW. The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition.