Used Wolters Ac500 F for sale (33,019)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, compressed air connection: 6 bar, table load: 250 kg, control voltage: 24 V, grinding wheel diameter: 445 mm, overall weight: 1,000 kg, input frequency: 50 Hz, Equipment: documentation/manual, Fully refurbished Peter Wolters AC500 precision grinding machine. The machine has been completely rebuilt and is in like-new condition. Equipped with a new control cabinet, new Siemens PLC, and Siemens HMI. 3.5 kW main drives with 296 RPM. Maximum process pressure of 250 daN with a new Festo valve manifold and new proportional valves. New Mahr measuring control system with automatic tool positioning and switching points for load stages. Speeds, process pressures, times, and dosing can be freely programmed via passwords. The machine has a recipe memory and Ixion remote maintenance. Process support for precision grinding functions. Documentation available in paper format. CE and EN60204-1 compliant. Nedpfsz Ei Tfsx Agrolg The machine is in stock and immediately available. Inspection under power and with compressed air is welcome.

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Nledpetxitvefx Agreg Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Nedpey R Drlefx Agrolg

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 152 x 152 [mm] - Conveyor speed : 0 - 5.1 [m/min] - Grinding wheel diameter : 457.2 x 254 x 63.5 [mm] - Speed : 1200 [rpm] Nljdpfx Aezwx Hzogreg - Power : 18.38 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2300 x 1500 [mm] - Machine height : 2250 [mm] - Machine weight : 3350 [kg] EQUIPMENT - Siemens PLC - Coolant tank

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Working Table: Flat table Njdpfxozq Ur Ts Agrelg Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: suction cups. Nodpju Huwcjfx Agrjlg

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Nodoz Apc Rjpfx Agrslg Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: used, Year of construction: 2019, machine/vehicle number: 9300000000083049, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 415 V, input current: 5 A, total width: 1,950 mm, total height: 2,480 mm, overall weight: 1,100 kg, fuel type: gas, We are offering this used Pavailler CRISTAL FM2 F/G rotary rack oven, manufactured in 2019. Nlsdoz D Uxkopfx Agrjg Type designation: Rack oven CRISTAL FM2 F/G Serial number: 930000083049 Date of manufacture: 07/2019 Category and gas pressure: I2L3P / 25 - 30 mbar Current: 5.8 A Gas certification number: 1312AU1466 Gas certification company: 1312 Net weight: 1100 kg Heating capacity: 77 kW Electrical power: 4 kW Flue gas outlet type: B23 Fuel: Natural gas Destination: Netherlands Voltage: 380-415 V Country of origin: France Suitable for baking trays of: 600x800 mm (WxDxH): 1950x2760x2480 mm Door opening (WxH): 800x1850 mm Price is exw Zwaagdijk NL Status: AS IS, no guarantees If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Nedpfszuwqtox Agrslg Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 9,975 h, machine/vehicle number: 00110813-06.17, control type: CNC control, actuation type: electric, controller manufacturer: Schneider Electric, controller model: Magelis, laser type: fiber laser, laser source manufacturer: IPG, laser hours: 9,975 h, laser power: 450 W, laser wavelength: 1,050 nm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, working length: 500 mm, working width: 500 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, input voltage: 1,200 V, input current: 30 A, type of cooling: air, total length: 1,180 mm, total width: 1,343 mm, total height: 1,341 mm, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used ALPHALASER AC 450 F laser cutting machine, manufactured in 2017, for sale. Manufacturer: ALPHALASER Model: AC 450 F Year of manufacture: 2017 Laser operating hours: 9975 hours without dust extraction system Nlsdpfx Ajz Ahzfegreg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. Nodpfxjznwyze Agrslg The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Questions are welcome.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Nsdpfx Agsz Agzqerslg Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Nsdpezy Hhxofx Agrelg Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Nsdpfx Agoz Ag A Ierolg Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! Nedpfx Agez Agzdsrelg The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Njdpfx Agjz Ag Aberslg Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Nsdpfx Agsz Ag Anjrolg Collets Holders Additional accessories

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 21-06-12-054, functionality: fully functional, operating hours: 385 h, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Available from April 1, 2027, for self-disassembly and self-collection. The machine features ProDrive control with a 3.5" color display and a separate keyboard. The height and swivel adjustment of the saw unit are motor-driven. The CNC-controlled parallel fence enables a cutting width of 1,300 mm. Equipment / technical data: • Machine height 910 mm • Control panel at eye level • ProDrive control with 3.5" color display • Main motor 5.5 kW (7.5 hp) VARIO • Stepless speed control, approx. 2,000–6,000 rpm • Saw unit that can be swiveled to one side, 0–46° • Extended cutting height for saw blade diameters up to 500 mm • AKE quick-change system for the main saw blade • 2-axis scoring unit • Motorized height and lateral adjustment of the scoring unit • Scoring unit motor 0.75 kW / 8,200 rpm • LED lighting in the area of the scoring unit • Table extension 840 mm • Double roller carriage 3,800 mm with floor support • On/off switch on the double roller carriage • Angle miter fence, length stop up to 3,500 mm Nledpfx Ajz Ah E Regreg • Two individual folding stops • Extendable cross slide extension, extendable to 650 mm • CNC parallel fence, cutting width 1,300 mm • Travel speed of the parallel fence 250 mm/s • Automatic dimension correction depending on the fence profile • Front support roller, 300 mm wide • DUPLEX 1350 mm double-sided miter fence • Template holder directly on the control panel • 99 storable cutting programs • Operating hour counter • USB interface • 400 V / 50 Hz Special equipment: 3,800-mm double roller carriage, CNC parallel fence 1,300 mm, 2-axis scoring unit, VARIO drive, and the DUPLEX miter fence. Inspection and test run possible by appointment.

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Nledpez Ekb Defx Agrog Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: used, Year of construction: 2017, operating hours: 9,600 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 110 mm, construction height: 3,240 mm, fork length: 1,500 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 110 mm Fork length: 1,500 mm MACHINE DETAILS Operating hours: approx. 9,600 h Overall height: 3,240 mm EQUIPMENT Hydraulic fork positioner with side thrust 4-way super elastic tires Full cab with heater Work lights Nledpezza E Tofx Agrog

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,400 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 30 mm, actuation type: hydraulic, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Panel saw ALTENDORF, F45, with scoring unit, tilting and height adjustment of the saw blade electrically controlled up to 45 degrees, sliding table 3000mm. Nedpfx Aozzy Saegrolg

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Nledpfx Agsx A Tbwjrsg

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Nledpfx Agezx Dwnerjg Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, Year of construction: 2012, Spiral mixer, laboratory mixer, Diosna SP 12 F Year of manufacture: 2012 Condition: very good Capacity (dough): 12 kg Capacity (flour): 7.5 kg Nedpfx Ajz A R D Hjgrolg Digital control with program memory Reverse operation Protective cover with safety switch Includes base frame/ingredient trolley

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Nljdpfxszvp Uys Agrog