Used Wpm Wpm 400-C for sale (65,766)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets Nlodpfx Akjyuuzdsujb • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: ready for operation (used), A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible. Nljdsyn Nzfopfx Akuob

Condition: good (used), General Information: Model: Gildemeister CTX 400 Series 2 Year: approx. 2000 Control: Heidenhain CNC Pilot Configuration: C-axis with driven tools Technical Specifications: Max. turning diameter: ~400 mm Max. turning length: ~600 mm Swing over bed: ~570 mm X-axis travel: ~220 mm Z-axis travel: ~635 mm Spindle: Spindle speed: up to 5000 rpm Spindle power: approx. 21–28 kW Bar capacity: ~79 mm Turret & Tooling: 12-position turret VDI 30 tool holders C-axis for milling/drilling operations Rapid Traverse: X-axis: ~20 m/min Z-axis: ~24 m/min Condition & Maintenance: The machine has recently undergone a complete hydraulic overhaul Brand-new hydraulic pump installed Full service completed in February 2026 Current status: The machine is showing an X-axis alarm Nodpfx Akjy Ixxbsujlb Therefore, it is offered for sale as-is in current condition Additional Information: Machine can be inspected on site Known as a solid and reliable turning center suitable for medium-sized parts Ideal for turning operations with additional milling capability (C-axis )

Condition: used, Year of construction: 2020, gebraucht 2020 1658 prompt, Zwischenverkauf v Bulgarien 26500 € 1 22600 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Nledpowirdtefx Akusb spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Binder FED 400 Heat Cabinet Heat Cabinet / Drying Oven / Laboratory Furnace Industrial model with forced convection Manufacturer: Binder GmbH Model: FED 400 Design: Heat cabinet with forced convection For sale is a pre-owned Binder FED 400 heat cabinet from an industrial facility closure. This heat cabinet is suitable for laboratory, research, development, quality assurance, materials testing, as well as industrial applications. The unit features electronic temperature control, forced convection, and a stainless steel chamber in a robust industrial build. Technical Data (according to nameplate / manufacturer specifications): Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial-No.: 15-21306 Made in Germany Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Power supply: 3 N~ Nominal power: 3.40 kW Current: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced convection Safety device according to DIN 12880 Class 2.0 External dimensions approx.: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions approx.: Width: 1000 mm Height: 800 mm Depth: 500 mm Chamber volume: approx. 400 liters Weight (manufacturer information): approx. 145 kg Equipment: Binder FED 400 heat cabinet Forced convection Digital temperature control Electronic controller Stainless steel chamber Double-leaf doors Njdpfx Aey R Axqekuslb Removable shelves Rear exhaust port Industrial and laboratory design Condition: Used equipment with typical signs of age and use. Visual condition as shown in photos. The device is from ongoing operation. Scope of delivery: Binder FED 400 heat cabinet Removable shelves Scope of delivery as pictured Notes: Inspection possible by prior appointment. Actual technical data, dimensions, weights, and features may vary. Information without guarantee. Subject to prior sale. Commercial sale – sold without warranty.

Condition: used, Year of construction: 2007, pressure 40 t stroke 12 - 100 mm no. of strokes 60 - 150 /min throat 220 mm dayligth 340 mm table surface area 650 x 480 mm Nledsyx Intspfx Akusb ram surface 370 x 300 mm ram adjustment 70 mm power requirement 4,0 kW Weight 3,0 t dimensions (WxDxH) 1,2 x 1,5 x 2,3 m with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: new, We supply spare parts for all machine types manufactured by ZMM SLIVEN in Bulgaria. Njdpfx Akjuladkeuelb

Condition: new, Precision cycle lathe with Siemens Sinumerik 828 D control Manufacturer: GDW Model: C 400 Z conturline with quick-change tool holder size B Condition: Brand new machine Meets the highest safety standards Nljdpfxexy Rw Rj Akusb Standard equipment includes: - LED tube work light - Electromechanical holding brake for the main spindle, programmable or switchable via push button on the operator panel - Coolant system - Quick-change tool holder size B, incl. one turning tool holder size B - Reducing sleeve for main spindle internal taper ME 70 / MK 4 - Protective flange for spindle head DIN 55027-6 - 2 fixed center points MK 4/5 - Set of operating tools with tool bag, set of keys, grease gun - Operating manual with spare parts lists, electrical documentation in print and on CD

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Njdpfx Ajxvy Rljkujlb Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape Nedpfx Ajya Dh Dekujlb 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,040 mm, total width: 560 mm, total length: 960 mm, overall weight: 130 kg, warranty duration: 6 months, type of cooling: water, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. Nodpfjxdni Ssx Akuelb USED ONLY 178H We provide a 6-month warranty. EWM TITAN XQ 400 puls C W EX WIFI R1 5m is a top-class German MIG/MAG semi-automatic welding machine, designed for professional and industrial use. It stands out with its high performance, advanced synergic programs, and innovative AC/DC pulse mode, which ensures excellent welding results on steel, stainless steel, aluminium, and non-ferrous metals. The integrated WiFi interface allows convenient remote operation, software updates, and seamless integration into a smart production environment. Model: TITAN XQ 400 puls C W EX WIFI R1 (with 5 m cable) Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100 % Power supply: 3~ 400 V, 50/60 Hz Cooling system: water-cooled (W version) Processes: MIG/MAG, pulse, double pulse, forceArc, rootArc, AC Arc Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Efficiency: >90 % Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg German quality and reliability. AC/DC pulse – ideal for welding aluminium and alloys. Synergic programs – fast and precise parameter selection. WiFi interface – remote control, updates, and network integration. High efficiency (>90 %) – reduced energy consumption. Mobile trolley – easy transport within the workshop. Compatible with robotic systems via additional interfaces. Automotive industry Stainless steel and aluminium structures Shipbuilding Serial and robotic production Industrial constructions and metal fabrication

Condition: new, neu Bulgarien 40850 € Nledpfxeyq Stij Akueb 780.24 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. Nodpfx Akjw E Itisuolb The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, mileage: 800,000 km, power: 294 kW (399.73 HP), first registration: 04/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, emission class: euro3, loading space length: 6,550 mm, loading space width: 2,540 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Volvo FH 13 400 / 6x2 Platform 6,55 m + CRANE Accident-FREE IN GOOD CONDITION! Nlsdpfsymvhvsx Akuob ? YEAR OF PRODUCTION: 2006 ? MILAGE: 800 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 655 x 254 (L x W ) HEIGHT FROM THE GROUND : 90 CAPACITY: 13 500 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 280/140 cm TIRE SIZE: FRONT : 385/55R22,5 BACK : 295/60R22,5 SUSPENSION: AIR CRANE: HIAB XS 200 C - 5 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 9857

Condition: as good as new (ex-display), rotating bezel Make Bulmak type C 400 TS Height 160 mm Njdpfx Akof I Smzsuelb Height from clamping surface to middle of steady rest. 160 mm maximum shaft diameter 110 mm weight 14 kg

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien Nsdpfxexzuu Ao Akuslb 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: used, Year of construction: 2000, Manufacturer: Atoma Model: 823-C-400 Nedpfx Aex Rz Hgekujlb Year: 2000   Number of weighing channels: 3 Maximum weight: 400 g Margin of error (e): 0.5 g   Feeding by hopper and vibrating lane. Conveyor belt Product stop by cell  

Year of construction: 2000, condition: good (used), Brand: SICA Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacture: 2000 Nedpjxu I Szjfx Akujlb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G Nedpfowhvrrox Akuslb 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: good (used), functionality: fully functional, Wolfking C 400 - UNI Industrial Meat Grinder Manufacturer: Wolfking Model: C 400 - UNI Machine Number: 61672 Year of manufacture: 2001 Power: 91 kW Nedpfx Aox E Dvmjkuolb Power supply: 3 × 400 V, 50 Hz Rated current: 180 A Maximum current: 200 A Protection class: IP 65 Loading capacity: 125 kg The Wolfking C 400 industrial meat grinder is a high-performance machine designed for processing large quantities of meat in production environments. This machine stands out for its exceptionally robust construction, powerful 91 kW drive, and high resistance to demanding working conditions due to its IP65 protection rating. The C 400 model allows for fast and efficient processing of fresh, chilled, or slightly frozen meat. Stable operating parameters and a large loading chamber (125 kg) make this unit ideal for medium and large processing plants. A strong drive system combined with a V/D Starter ensures reliable start-up and continuous operation under heavy loads, contributing to high reliability and long machine lifespan.

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Nlsdpfx Aexwu R Nskuob Screw diameter: 30 mm Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: used, Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Main material: Stainlees Steel Machine weight: 250 kg Nedpot Up Rrjfx Akuslb

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h Njdpfsxqfi Asx Akuolb

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Nledpfxoufr H Aj Akueb

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: Nodpfx Akjyc H N Njuelb • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete