Used Wtt Thermal Treatment System / Vacuum Dryer for sale (37,631)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers Kdedpfsv Si Szsx Afdek 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 50 kW (67.98 HP), input voltage: 400 V, inner dimension length: 9,300 mm, inner dimension width: 220 mm, inner dimension height: 220 mm, overall weight: 11,000 kg, control type: NC control, fuel type: electric, Equipment: CE marking, documentation/manual, in zeer goede staat hoogfrequent vacuüm droger capaciteit 12,5 tot 13 m3 Kjdpfx Afoy Dr N Sodsdk vermogen HF output 50 kw bij een input van 70 Eva door te drogen onder vacuüm verlaagt het kookpunt van water vanaf 60 graden wat sneller drogen op lagere temperaturen mogelijk maakt

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Kedevf Ig Depfx Afdjdk Car inspection stickers were last produced

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Kedpfsy A Trljx Afdedk If you have any questions, please feel free to contact me.

Condition: used, comprising: base frame, 2 storage tanks, stainless steel, tank vessel by WERIT, reverse osmosis unit, type: SILHORKO, year 1995, control cabinet by RITTAL, with piping system, filtration, pump and valve technology, as well as 2 tipping skips, wheeled/mobile Ksdpfxoy Aqchs Afdedk

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 726.107, Stephan micro-cutting and vacuum mixing system, consisting of: Stephan micro-cutter, machine type: MCH 20/VM, machine number: 726.107.02, year of manufacture: 2000, 400 V, 50 Hz, 26 A, 2925 min-1, (2x) Stephan Vacutherm mixing systems, machine type: VM/MC 450/450/20, machine number: 726.107, year of manufacture: 2000, 400 V, 50 Hz, 76 A, 42 kW, volume container: 485 liters, permissible operating pressure container: -1 / 0.3 bar, permissible operating temperature container: 95 °C, volume jacket: 38 liters, permissible operating pressure jacket: 4.0 bar, permissible operating temperature jacket: 152 °C, (2x) Fristam rotary lobe pumps, type: FLFNS 100L, Pump number: 69244005 and 69244004, Packo centrifugal pump, type: ICP2-32-160/352, serial number: 30071, year of manufacture: 2000, Q: 30 m³/h, overall dimensions of mixing plant: 4900 mm x 1950 mm x 3400 mm, including s/s platform with stairs, dimensions: 3920 mm x 2100 mm x 2400 mm, control cabinet, dimensions: 2400 mm x 400 mm x 2000 mm, pallet with knives for micro cutter, dimensions: 1200 mm x 800 mm x 250 mm and pallet with stainless steel filling funnel, dimensions: 1200 mm x 800 mm x 700 mm. Stephan micro cutting and vacuum mixing installation, consisting of: Stephan microcutter, machine type: MCH 20/VM, machine number: 726.107.02, year of construction: 2000, 400 V, 50 Hz, 26 A, 2925 min-1, (2x) Stephan Vacutherm mixers, machine type: VM/MC 450/450/20, machine number: 726.107, year of construction: 2000, 400 V, 50 Hz, 76 A, 42 kW, volume vessel: 485 liter, permissible operating pressure vessel: -1 / 0.3 bar, permissible operating temperature vessel: 95 °C, volume jacket: 38 liter, permissible operating pressure jacket: 4.0 bar, permissible operating temperature jacket: 152 °C, (2x) Fristam rotary lobe pumps, type: FLFNS 100L, pump number: 69244005 and 69244004, Packo centrifugal pump, type: ICP2-32-160/352, serial number: 30071, year of construction: 2000, Q: 30 m³/h, total dimensions mixing installation: 4900 mm x 1950 mm x 3400 mm, including s/s platform with stairs, dimensions: 3920 mm x 2100 mm x 2400 mm, switch cabinet, dimensions: 2400 mm x 400 mm x 2000 mm, pallet with knives for microcutter, dimensions: 1200 mm x 800 mm x 250 mm and pallet with s/s infeed hopper, dimensions: 1200 mm x 800 mm x 700 mm. Kdsdpsv Ev Hrjfx Afdek

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Kdedpeygvnijfx Afdok

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 3,500 kg, We offer this used Tantec PLX XYZ surface pre-treatment system for printing applications, year of manufacture 2021. Type: PLX XYZ Year of manufacture: 2021 Serial number: 41805 Control voltage: 24 VDC Voltage: 400/230 V 3ph+N+PE Current: 9.5 A Frequency: 50 Hz Power: 6.5 kW Weight: 3500 kg Kdjdpsy Am D Iefx Afdjk If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. Kedpfx Afoyzdm Redjdk The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Ksdpfxsyy R D To Afdjdk To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Year of construction: 2023, condition: used, Make: H2O, Model: Vacudest XS Clearcat, Year of manufacture: 2023, Max. treatment capacity: 300 m³/year, Machine control with Vacutouch touch display, 5 IBC tanks, 3 IBC drip trays, manufacturer: CHEMO, year: 2023, capacity: 1,100 l, CIP system, piping, pump, operating hours: 4,868. Kjdpfsyx Excsx Afdodk

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Kdsdpfxeyxcqvo Afdok Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Year of construction: 1989, condition: used, Hosokawa Nauta vacuum dryer Gross capacity 100 liters Entire unit can be connected by means of plugs Machine is sold in its current condition. Kedpfx Afoyvv Iisdsdk Equipped with a ball segment valve Original paper documentation available. Includes all technical drawings

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Kdjdpfx Aoyb Rpdofdek The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: ready for operation (used), Air distribution system, Air Center Elmo Rietschle – Used equipment Overall dimensions: Length: 1000 mm Width: 700 mm Height: 2170 mm Electrical data: 400V; 5.5 kW; 2900 RPM Vacuum pumps: Gardner Denver 2x Kdodpjw Au Twsfx Afdek Type: SAH 235 Pressure range: +650 to -470 mbar Max airflow: 240 m³/h

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Dry air dryer Manufacturer: Motan Ksdpjyvfkrjfx Afdedk Model: Luxor LA/8-200 Connected load: 6 kW Dry air volume: 200 m3/h With vacuum pump VACOM Model: VC 340-720 Power: 4.6 kW With central filter and Motan control Granulate silos: 1 x 150 L 4 x 60 L Material conveying units: Manufacturer: Motan Model: HLX-06-1-A000-0 5 units

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer with material conveying units Manufacturer: Motan Model: ADC 200/10/20 Connected load: 5.6 kW Dry air volume: 200 m³/h Kjdpfxeyvfibs Afdsdk With vacuum pump VACOM Model: VC 340-720 Output: 4.6 kW With central filter and Motan control system 5 silos with material conveying units

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) Laboratory Vacuum Chamber, Perfect Condition, Demonstration Machine Model: Binder VDL 115 Year of manufacture: 2025 Condition: As new – showroom/demonstration unit, after factory testing Capacity: 115 liters Power supply: 230 V Availability: Immediately Warranty: Yes, 2 years on spare parts (service available at additional cost) VAT Invoice: Yes Location: Grabina, 92-701 Poland Optional: Transport — Description: We offer for sale a Binder VDL 115 vacuum chamber, designed for drying organic solvents and flammable substances under vacuum conditions. This is a safety series VDL model compliant with ATEX requirements, suitable for use in explosion hazard areas (class 3). The unit was used exclusively for demonstration purposes – it is in perfect visual and technical condition, supplied with a full set of documentation. — Key Specifications: • Temperature range: from +9°C above ambient up to +200°C • Useful volume: 115 liters • Interior made of stainless steel (1.4571) – chemically resistant and easy to clean • Controlled, safe vacuum with adjustable levels • ATEX 2014/34/EU compliant, safety class 3 • LCD display control, programmable parameter adjustment • Standard: 2 aluminum shelves + inert gas valve — Ksdpfxevq I Tns Afdodk Applications: • Pharmaceutical and chemical industry • R&D laboratories • Drying solvents, non-reactive materials, and temperature-sensitive samples • Production of electronic and precision components — Why choose this? • Machine in flawless, as-new condition • No signs of use, inclusive of complete technical documentation • An ideal alternative to a new device – immediate availability, no lead time • Attractive price, possibility for on-site testing or remote demonstration

Year of construction: 1993, condition: good (used), Central vacuum system for dust , fumes and solids in industrial facilities. VAC unit is a suitable choice of high vacuum system for extraction of welding fumes, dust from grinding, polishing processes. Capacity of 3000 m3/h at a vacuum of 19000 Pa Kdedpfxon Nvw Ao Afdok Maximum vacuum - 22000 Pa Inlet diameter - 200 mm Motor power - 37 Kw FlexFilter F 12 B TFE filter units x 2 pieces included. Max airflow: 1,600 m3/h (900 CFM). Max. vacuum: - 50 kPa (7.25 psi). Separation: ≈99.95% (fine dust).

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: Ksdpfx Afjyr Rxgedsdk The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Kjdpfx Afoulwg Nodedk Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Kdsdpfouu Rx Rox Afdek Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Kjdpsuu Rr Djfx Afdsdk Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW

Condition: used, Year of construction: 2023, functionality: fully functional, cutting width (max.): 780 mm, cutting length (max.): 1,080 mm, Equipment: documentation/manual, Description For sale: Secabo FC100 professional flatbed cutting plotter, purchased in 2024 and barely used. The machine is in perfect working order and available for inspection and testing. It features a vacuum table with a vacuum pump, ensuring excellent material fixation and precise cutting quality. This cutting plotter is ideal for: - Packaging prototypes - Labels and stickers - Cardboard packaging - POS materials - Short production runs The machine is supplied with licensed DrawCut PRO software. Technical Specifications - Working area: 780 × 1080 mm - Maximum cutting thickness: 1.5 mm - Maximum material weight: up to 400 g/m² - Cutting force: 50 – 500 g - Maximum cutting speed: 600 mm/s - Drive system: Servo motor - Automatic contour cutting with LAPOS Q mark recognition - Interface: USB - Control panel with LCD display Included in the scope of delivery: Kjdpfxjytbubo Afdodk - Secabo FC100 flatbed cutting plotter - Vacuum table + vacuum pump - DrawCut PRO license - Knife holder + blades - Creasing tools - Cutting mat - Accessories and cables Condition - Age: Approximately 1 year - Very low usage - Excellent condition

Condition: good (used), Rarely available as a used machine. Leepack auto pouch filling system. Was packing sous vide meals. Kdodeyh Ragspfx Afdek