Used Ycm Xv 1250 A for sale (69,497)

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Iedpfx Apjyviqdscjar Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2008, Vertical Machining Center YCM XV 1250 A - Fanuc MPX 100i Control - CE marking - Fanuc MXP 100i control - Prepared for 4th axis - Year of manufacture: 2008 / Only 1 previous owner, very well maintained / Original paintwork - Travel (X / Y / Z): 1270 x 520 x 540 mm Iedpsyi A Inefx Apcear - Rapid traverse (X / Y / Z): 36 m/min / 36 m/min / 24 m/min - Feed rates: approx. 945 IPM (inches per minute) - Distance table surface to spindle nose: 100-645 mm - Worktable: 1350 x 520 mm - Max. table load: 1000 kg - Spindle speeds up to 10,000 rpm - Spindle taper: BT 40 - Spindle motor power: 11.2 kW - Tool changer (ATC): 24 stations / side-mount type - Tool change time: 3.5 s (tool-to-tool) - Electronic handwheel - RS232 interface - Various tool holders - Chip conveyor - Spindle oil cooler - High-pressure pump - Oil skimmer - Work light - Machine bases - Machine documentation Dimensions (L x W x H): 3.5 x 2.4 x 2.2 m / Weight: 7,000 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details. • Table size: 700 x 420 mm • Condition: Very good; low hours; used in 1-shift production Isdpoy Duxvjfx Apcoar

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 711194, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, controller manufacturer: FANUC, controller model: SERIES 18-M, total height: 3,200 mm, total length: 3,500 mm, total width: 2,800 mm, table width: 600 mm, table length: 1,200 mm, table load: 1,200 kg, overall weight: 10,000 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 24, mount diameter: 50 mm, tool weight: 15 g, YCM SUPERMAX V116B CNC Vertical Machining Center Iodjyvqzdopfx Apcoar - Operating voltage: 400 V - Frequency: 50/60 Hz - Connection: 40 kVA - Spindle mount: BT 50 - Front bearing diameter: 100 mm - Distance between spindle nose and table center: 218 - 848 mm - Distance between spindle center and column: 650 mm - Table T-slots: 5 - T-slot size: 18 mm - T-slot spacing: 100 mm - Max. tool dimensions: diameter 125 x 350 mm - Tool holder: SK 50 - Incl. rotary table (4th and 5th axis) from manufacturer NIKKEN, with three-jaw chuck, diameter: 250 mm Note: The item must be collected definitively between 12.05. and 22.05.2026 on a date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis YCM NXV560A was manufactured in 2014. It features a direct-drive spindle with a speed of 12,000 rpm, a 28-station arm-type tool changer, and a belt-type chip conveyor. The CNC control is iTNC530 HSCI, and it has XYZ travels of 560, 410, and 450 mm respectively. Consider the opportunity to buy this YCM NXV560A vertical machining center. Contact us for more information. • Tool magazine: 28 stations, arm-type random changer • Coolant through spindle: 20 bar Additional equipment • Chip conveyor: Belt-type Ijdsx D Dttopfx Apcjar

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Screen size 15" 12,000 revolutions 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Oil separator Iodpfx Aorfdckopcear Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, rotational speed (max.): 12,000 rpm, Vertical machining center YCM NXV600A - demonstration machine Control: Heidenhain TNC620 Spindle: 12,000 rpm SK40 17kW Coolant system with IKZ20 bar Handwheel Tool changer: 24-way Chip conveyor Iaedpfx Apevvuh Aecer The machine is located at our location in Soltau and can be viewed in operation at any time!

Condition: new, operating hours: 15 h, YCM NXV1020A, spindle: SK40/12,000 rpm, control: Siemens 828D, tool changer: 30-fold, X:1020mm Y:520mm Z:540mm, coolant system: IKZ20bar, chip conveyor Iodporutazefx Apcoar

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train - Power: 110-1250 kW Iodpfx Apowgym Dscjar - Year of manufacture: 2011 - Design: ZM

Condition: ready for operation (used), Year of construction: 1995, Vertical Machining Center YCM - VMC 65A / Fanuc OM - CE mark Ijdpfeyup N Aex Apcoar - Control system Fanuc OM - Ready for operation / Functional video available - Travels X / Y / Z 650x410x615 mm - Table dimensions 840x420 mm - Speed range up to 6000 rpm - Tool holder BT 40 - 2x Hydraulic vises - Tool magazine / Side-mounted 16-position changer - Electronic handwheel - Coolant system - Motor power 7.5 kW - Machine leveling feet Dimensions (LxWxH): 3.5x2.4x2.8 meters / Weight 4500 kg Errors and data entry mistakes excepted.

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Iedpowcxlwsfx Apcear Year of Manufacture: 2011 Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Technical data and equipment available upon request

Condition: excellent (used), Year of construction: 2025, Year of manufacture 2025, low operating hours Fanuc 0i-TF Turning diameter: 400 mm Turning length: 850 mm Main spindle: 3,500 rpm, 22 kW Turret: 12/24 stations, BMT65 Driven tools: 6,000 rpm Y-axis: +/- 55 mm C-axis Chuck: 250 mm Coolant: 6.5 bar Chip conveyor Tool measurement Programmable tailstock Commercial sale with invoice from our warehouse in 73061 Ebersbach For an exact price and in case of questions, please send a message with your email. Please understand that a quotation will only be sent upon receipt of your complete data. Isdeyuuibspfx Apcear Loading and shipping possible.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Twin-Spindle Turning Center Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Maximum turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing over bed: 700 mm Swing over tool turret 2: 540 mm Travel distances: X1 — Tool Turret I: 270 mm Y1 — Tool Turret I: 120 mm Z1 — Tool Turret I: 1200 mm X2 — Tool Turret II: 195 mm Ijdpswcd S Nefx Apcjar Y2 — Tool Turret II: 80 mm Z2 — Tool Turret II: 1200 mm X3 — Counter-spindle slide: 180 mm Z3 — Counter-spindle slide: 1200 mm Main Spindle Integrated spindle motor ISM 102 Drive power (100/40% DC): 40/48 kW Torque (100/40% DC): 570/680 Nm Speed range: 0–4000 rpm Bar capacity: 102 mm Draw tube internal diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter Spindle Integrated spindle motor ISM 76 Drive power (100/40% DC): 25/32 kW Torque (100/40% DC): 280/380 Nm Speed range: 0–5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI (DIN 69880) tool mounting diameter: 40 mm Maximum power (100/40% DC): 10.9/14.2 kW Maximum torque (100/40% DC): 26/34 Nm Speed range: 40 – 10,000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 VDI (DIN 69880) tool mounting diameter: 40 mm Maximum power (100/40% DC): 10.9/14.2 kW Maximum torque (100/40% DC): 26/34 Nm Speed range: 40 – 10,000 rpm Slide 3 Rapid traverse rate X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% DC) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES - Short bar loader magazine IRCO ILS-RBK 100/16 - Various main spindle reduction sleeves - NC-controlled parts pick-off device for both main and counter spindle: * NC-controlled horizontal axis * Swivel unit * Vertical axis * 2-jaw gripper for interchangeable gripper jaws - Conveyor belt for part removal - Coolant system 8/20 bar with immersion cooler - Chip conveyor - Oil mist extraction - Control cabinet cooling unit (up to 40°) - Counter-spindle slide - Easy-Tool Monitor - 1 collet chuck for quick-change collet head size 100 for main spindle - 1 collet chuck for quick-change collet head size 100, Nova Axle Fix for counter spindle - Approx. 40 various quick-change collet heads size 100 (full inventory) - Pneumatic quick-change unit, ø 100 mm - Approx. 50 various tool holders, stationary and driven (full inventory) - Mounting elements - Documentation

Year of construction: 2019, condition: ready for operation (used), A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible. Iajdpfx Apewgnglocer

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-0/WI520LV / 235450 servomotor, serial number: MAC0290-85049 + Heidenhain ROD 1424.003-1250, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Iaedpfx Asx Etyzepcor

Condition: used, functionality: fully functional, FESTO DGPL-40-1250-PPV-A-B-KF-GH-SH Linear actuator. Good working condition. Please check out our other listings as well. Iajdpfxotwqrws Apcor

Condition: new, New "CE". Lenght : mm 1250 Exercise power : Ton 40 CNC ESA S 630 Touch 10" 2D Controlled axes No. 4 (Y1-Y2-X-R) Iaedpfx Apshkr A Docsr Y axis stroke : mm 210 Opening width : mm 415 Backgauge stroke: mm 750 Upper and lower tools included. Motor power: kw 4 Approximate weight: Kg 3500 Dimensions: mm : mm 2.300 x 1800 x 2700 (h).

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Iaedpfx Apewwv Ifecjr Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: used, Year of construction: 2014, operating hours: 17,500 h, functionality: fully functional, Technical details: Travel distance X-axis: 1,020 mm Travel distance Y-axis: 600 mm Travel distance Z-axis: 600 mm Rapid traverse X/Y-axis: 36 m/min Rapid traverse Z-axis: 24 m/min Feed rate XYZ-axis: 20,000 m/min Torque: 18,500 Nm Ijdsy A Rd Sopfx Apcear Controller System:Heidenhain iTnc530 Spindle speed (max.): 8,000 rpm Table size: 1,120 x 600 mm Table load: 800 kg Overall weight: 6,500 kg Coolant supply: 30 bar Distance table center to spindle nose: 680 mm various tool tapers: SK 40 Number of in tool magazine: 24 pcs Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: not inspected (used), Fanuc OM Control XYZ 600x400x460 Speed 45-6000 Taper ISO 40 Tool station 16 Table 920x320 Iasdpfxsv Sunne Apcjr

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler Isdjyh Ri Ispfx Apcear - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: good (used), Year of construction: 2018, functionality: fully functional, Controller FANUC MXP-200FC Table size D380 mm Table load max 200 kg X travel 700 mm Y travel 520 mm Z travel 480 mm A axis +30/-120 degree C axis 0-360 degree Spindle speed 12000 rpm Tool holder type BBT40 Rapid speed 36/36/24 m/min Feedrate 1 - 100000 mm/min Max tool diameter and length D78 x 280 mm Max tool weight 6 kgs Spindle power 22,5 kW ATC magazin 30-fold Power required 46 kVA Accessories, features - CTS - integrated 4/5 axis - Coolant unit - Chip conveyor - Mist collector - external hydraulic - manuals Iaodpfx Apjr I Az Tecsr The machine is still under power and can be inspected in function. Ready to buy.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 Ijdpfjuxbciex Apcear control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: as good as new (ex-display), travel distance X-axis: 800 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, Equipment: chip conveyor, YCM NH500A - demonstration machine - unused!! Control: Fanuc MXP300FB Spindle: 15,000 rpm / 244 Nm BBT40/SK40 Tool changer: 60-way Switch table Coolant system with 70 bar IKZ 3D probe Blum tool breakage control Glass scales Chip conveyor Iasdpfxovvudwj Apcer The machine is located at our location in Soltau and can be inspected at any time.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 660 x 510 x 560mm, Table size 840mm x 560mm, spindle speed 8,000rpm, 11kW spindle motor, Heidenhain TNC530i, Iedswc Twuspfx Apcjar Spindle taper BT40, 20 station ATC, coolant,