Used Z-Mat Vert.cnc Drehmaschine Control System for sale (70,808)

Condition: new, Year of construction: 2025, Z-MaT VT-600M, vertical CNC lathe Controller: Siemens 828D Shop Turn, 15" touchscreen C-axis with hydraulic brake, driven tools Max. swing diameter: 750 mm Max. turning diameter: 600 mm Max. turning height: 600 mm Spindle motor: 15/18.5 kW Spindle nose: A2-11 Spindle speed max.: 2,500 rpm 3-jaw hydraulic chuck without through-hole, 610 mm Turret type: BMT 65 Number of tools: 12, driven Drive power: 4.5 kW Max. speed: 4,000 rpm C-axis (spindle) indexing: 0.001" Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 16 m/min Nlsdpswprtbjfx Akysa Vertical travel (Z-axis): 600 mm Horizontal travel (X-axis): 450 mm Machine dimensions: 2,150 W x 3,450 D x 3,300 H mm Net weight: approx. 10,200 kg Standard accessories Full enclosure Electronic handwheel Coolant system Heat exchanger for control cabinet Coolant wash gun / air gun Automatic lubrication system LED work light 3-color status light Leveling bolts and leveling blocks Tools and toolbox Operating manual Flat-bed chip conveyor to the rear with chip cart RS232 interface CE certificate The machine will be exhibited at EMO, Hall 12/D10, and will be available immediately afterwards.

Condition: repair required (used), Year of construction: 2000, Machine was used to unload an injection molding machine. The robot has 5 axes, the first axis being the rail. It was provisionally commissioned and moved in single-axis mode. Damage to the harmonic drive of the 5th axis was found. The sleeve broke there and would have to be replaced. All others run fine. The control element is missing on the main switch. Machine can be inspected under voltage. Nljdskt Nqbjpfx Akyoa

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) Nledoyc H N Nepfx Akyoa • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: new, Year of construction: 2025, Z-MaT DT500E-S, Siemens 828 D ShopTurn 15" Touch CNC Turning Center, with Sub-Spindle, Driven Tools, and True Y-Axis, 35° Slant Bed Max. Swing Diameter: 650 mm Max. Turning Diameter: 320 mm Max. Turning Length: 550 mm Linear Roller Guides on All Axes Rapid Traverse X/Z/Y: 20/20/12 m/min Y-Axis Travel: 140 mm, +/- 70 mm Turret: 12 Stations BMT55 Nedpfx Aewwvldekyela — 12 Driven Positions Max. Turret Speed: 4000 rpm, 3 kW Main Spindle: Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Spindle Drive Power, Direct Drive: 15/16 kW Max. Spindle Speed: 3500 rpm Sub-Spindle: Chuck Diameter: 152 mm Spindle Nose Standard: A2-5 Max. Bar Capacity: 46 mm Drive Power: 11 kW Max. Speed: 3000 rpm Dimensions (W x D x H): 3.1 x 2.0 x 2.25 m Weight: 5.3 t Standard Equipment: Parts Catcher (Preparation) Hinged Belt Chip Conveyor Oil Skimmer Coolant System 3-Color Warning Light Work Area Lighting Centralized Lubrication System Programmable Tailstock Set of Soft Jaws Tools and Toolbox CE Conformity Operating Manual The machine will be exhibited at EMO, Hall 12/D10 and will be available immediately afterwards. A wide range of automation options is available, such as bar loaders and loading robots.

Condition: new, Year of construction: 2026, Z-MaT U320 5-Axis Simultaneous Machining Center Control: ZMATROL 5-Axis Simultaneous, 15" LCD screen (optionally Siemens ONE, 15" LCD screen) (Siemens/Fanuc 4+1) Travel (X/Y/Z): 500/500/400 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 24,000 rpm, built-in Spindle taper: BT30 Spindle motor: 3.7/5.5 kW Air blast through spindle Spindle air curtain Spindle oil cooler Tool changer: 21-tool disc Max. tool length: 200 mm Max. tool diameter: 60/100 mm Table Nljdpfx Ajyv A Trjkyja Table diameter: Ø 320 mm Max. workpiece diameter: 320 mm Max. table load: 80 kg T-slot (width x quantity x spacing): 14H8 x 8 x 45° Distance spindle center to table surface: 100–500 mm A-axis tilting travel: ±115° C-axis rotation: 360° Max. rapid traverse A/C-axes: 100/130 rpm A/C-axis encoders Standard accessories Work completion lamp, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic grease lubrication system 3-axis glass scales with air purge (XYZ) Automatic tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip wash) Full enclosure Transformer: 400V, 50Hz Electrical cabinet heat exchanger Automatic power-off Leveling bolts and blocks Toolbox CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 1800 x 3270 x 2510 mm Machine weight: approx. 4,300 kg Subject to errors and prior sale Extensive automation options available

Condition: new, Year of construction: 2026, Z-Mat TBX63S ZMATROL 15", 5-axis simultaneous (Siemens/Fanuc optional) Turning/milling center with B-axis ±120°, 12,000 rpm 6" sub-spindle, Y-axis travel 150 mm Max. swing diameter: 450 mm Max. turning diameter: 250 mm Max. turning length: 750 mm Linear roller guideways on all axes Main spindle Chuck diameter: 203 mm Spindle nose: A2-6 Max. bar diameter: 52 mm Spindle bore diameter: 66 mm Drive power, DDS: 18.5 kW Max. speed: 4,000 rpm Sub-spindle Chuck diameter: 152 mm Spindle nose: A2-5 Max. bar diameter: 46 mm Spindle bore diameter: 56 mm Drive power, DDS: 11 kW Max. speed: 5,000 rpm Milling spindle Spindle interface: HSK-T63 Max. speed: 12,000 rpm Drive power: 30 kW Max. torque: 95 Nm Axis travels X-axis travel, with Heidenhain glass scale: 790 mm Y-axis travel: -75 mm Z-axis travel: 750 mm W-axis travel: 1,000 mm B-axis swivel range: ±120° Rapid traverse X, Y, Z, W-axis: 24 m/min Tool magazine Double arm: 30 tools Max. diameter / length / weight: 78 mm / 250 mm / 8 kg Dimensions (W x D x H): 4.45 x 2.76 x 2.85 m Weight: 9.8 t Standard equipment 30 bar through-spindle coolant Ergonomic control panel with handwheel USB port, Ethernet, memory card Full enclosure Safety interlock door switch Coolant system Control cabinet air conditioning 3-color warning light Work area lighting Centralized lubrication Tools and toolbox CE conformity Nledpfxsyv A Nas Akyja Operating manual A wide range of automation systems, such as bar feeders and loading robots, are available.

Condition: new, Year of construction: 2025, Z-MaT Power V10 New Design Vertical CNC Machining Center Siemens 828D, Shop Mill 15" Touchscreen with 5 axes (3+2, 255mmØ table) Axis Travels X-axis travel: 1050 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Spindle nose / Table: 120–720 mm Work Table Table size: 1400 x 650 mm Max. table load: 1,000 kg T-slot size: 18 x 5 x 100 mm Spindle Data Spindle: SK 40, 12,000 rpm DDS, incl. oil chiller Spindle motor: 18.5/15 kW Tool Changer Double-arm gripper, 30 positions / 8 kg Feed Rates Cutting feedrate: 0–12,000 mm/min Rapid traverse (X/Y/Z): 30 m/min Dimensions & Weight Nsdpsww A Dyofx Akyjla Overall dimensions: 3,200 x 2,500 x 2,450 mm Total weight: 8,200 kg Standard Equipment - Full enclosure - Electronic handwheel (MPG) - Spindle oil cooler - LED work area lighting - Air blast through spindle - LED status signal light (3 colors) - Automatic central lubrication system - Coolant system with nozzles around the spindle - Coolant chip flushing system - Tapping without compensation chuck - 3-axis linear roller guides - Electrical cabinet heat exchanger - Ethernet, CF card, USB interface - Leveling bolts and machine feet - Toolbox - Coolant gun - Air gun - Operating manual - CE compliance Including special accessories: - Spiral chip conveyor - Coolant through spindle, 30 bar - 3+2 axis table, 255mm diameter Note: Video shows a machine of a different series with 3+2 axis table This machine will be exhibited at EMO, Hall 12/D10, and will be available immediately after the show.

Condition: new, Year of construction: 2025, Z-MaT TN500-450 Siemens 828 D ShopTurn, 15" Touch 35° Slant Bed, CNC Turning Center, with Tailstock C-Axis, hydraulic brake with driven tools, Linear roller guides on all axes with linear robot and magazine Max. Swing Diameter: 550 mm Max. Turning Diameter: 360 mm Max. Turning Length: 450 mm Rapid Traverse X/Z: 20/20 m/min Turret: 12 stations, BMT45 of which 12 are driven Nlsdpewwv Tuefx Akysa Max. Turret Speed: 4000 rpm, 3 kW Spindle Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Drive Power, Direct Drive: 22/30 kW Max. Spindle Speed: 3,000 rpm Tailstock Diameter: 110 mm / MT 5 Tailstock Quill Stroke: 100-500 mm Dimensions (W x D x H): 2.8 x 1.7 x 1.9 m Weight: 4.8 t Standard Equipment Hinged belt chip conveyor Oil skimmer Coolant system Three-color warning light Work area lighting Central lubrication system Programmable tailstock Set of soft jaws Tools and toolbox CE compliance Operating manual Machine with linear loading robot Video shows the linear loading robot with another machine The machine will be exhibited at EMO Hall 12/D10, and is available for immediate delivery afterwards.

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Nljdpfxoqa Dtfj Akyea Bar loader interface Video shows DT500

Condition: new, Year of construction: 2025, Z-MaT U630 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD screen Dual-torque direct drive Travel (X/Y/Z): 750/800/600 mm Rapid traverse (X/Y/Z): 36/36/36 mm/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through the spindle Spindle air curtain Spindle oil cooler Double-arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm mm Max. tool Ø 75/120 Table Table diameter: Ø 630 mm Max. workpiece Ø 650 mm Max. table load: 850 kg T-slot (width x number x pitch): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120-720 mm A-axis travel (tilt): +-120 ° C-axis rotation: 360 degrees Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoder Standard accessories End of operation lamp 3-color status light Electric handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air-operated (XYZ) Automatic Tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip flushing) Full splash guard Transformer: 400V, 50Hz Heat exchanger in the control cabinet Automatic shutdown Leveling bolts and blocks Tool box CE conformity Hinged belt chip conveyor Nlodpfowku Evex Akyja Machine size and weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 19,500 kg Subject to error and prior sale A wide range of automation options are available

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Njdpfx Akjwwt Troyola Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: new, functionality: fully functional, color: white, overall weight: 25,000 kg, operation weight: 30,000 kg, Year of construction: 2024, machine/vehicle number: 15362024021, ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Our machine that can produce 15 blocks or 36 paverstones in one press, is designed to produce 1200-1400 pallets per day. Aiming at maximum capacity with mass production, our machine is designed to work non-stop! Our machine, which can follow the mortar in machine with the loadcell system in the bunkers, takes you to the next level with the proportional mortar car movement, and reaches the maximum quality with the mold balancing and pressing system, is a pioneer in the sector with its many hardwares! Our machine which uses pneumatic system in the mold connection system, can perform the mold change process in 15 minutes. For the mold changing process, the machine body is separated from the press side on the rails, and all body height adjustments are made automatically. We are using “ VIBROSTAR ” oil bathed vibration systems in our machine. The oil bathed vibrations are also cycling the oil automatically and we keep the vibration süper cool always! We use 6 engines and total 33kW energy. This vibration engines are shaft connected to our special vibration system. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service. Nsdpfx Akefnz Uzjyjla

Condition: new, SWAS Water system control room inside a container measuring approximately 12 m long x 2.30 m wide x 2.30 m high; includes all interior equipment (multi-panel wall, floor, doors, two 15 kVA transformers, panels, lights, miisplit, among others). Nljdpfx Akoyf N U Hoyja Sistema de Análisis de Agua y Vapor cuarto de control dentro de un contenedor de medidas aproximadas 12 m de longitud x 2.30 m de ancho x 2.30 m de altura; Incluye todo el equipamiento interior (muro multipanel, piso, puertas, 2 transformadores de 15 kva, tableros, lamparas, miisplit, entre otros). Este lote se venderá al mejor postor, ya sea de manera individual (INDIVIDUAL) o como sistema completo (COMPLETE SYSTEM), adjudicándose en la modalidad que genere el mayor valor de venta. - This lot will be sold to the highest bidder, either individually (INDIVIDUAL) or as a complete system (COMPLETE SYSTEM), and will be awarded in the mode that generates the highest sales value.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Dear customers, We are offering an automation system with very high-quality built-in components and robots. We are sure that some of you may need these parts and we will find a fair price for everyone. With best regards Nsdpfou Rqm Usx Akyjla Nick Schönfeld

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Nsdpfjmza Ilsx Akyola Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Condition: excellent (used), KUKA KUKA KR 180 R2500 extra Industrial Robot + KRC4 Controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and teach pendant. The system was used in an industrial environment and is fully operational. It is ideally suited for automation, material handling, welding applications, and general production processes. Robot Technical Specifications: - Payload: 180 kg - Reach: approx. 2496 mm - Axes: 6 - Weight: approx. 1059 kg KRC4 Controller Technical Specifications: - Supply voltage: 3 x 400 V - Frequency: 50/60 Hz - Full load current: approx. 20 A - Circuit protection: 25 A - Weight: approx. 151 kg Dimensions (approx.): - Robot height: approx. 2200 – 2500 mm - Footprint: approx. 1000 x 1000 mm - Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: - KRC Version: V8.2.22 - HMI Version: 8.2.0.4 B142 - Base System: KS V8.2.142 - Windows Version: XPe V3.0.2 - Additional Axes: 1 Features: - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables and wiring - Industrial design for continuous operation Condition: - Used, technically fully functional - With normal signs of use - The system was in operation until recently Nlsdpfx Ajy Dn Siokysa Scope of delivery: - KUKA KR 180 R2500 extra robot - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables / wiring as depicted in the photos - Scope of delivery: (See images) (Subject to change and errors in technical data; all information provided without liability!) We are happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 1996, FREQUENCY CONVERTER KVA 60 - VOLT 380/660 - 50/100 HZ - RPM 1450 - 6000 GOOD CONDITION Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 380 V 100 Hz Nledpfjwcqxcjx Akysa -Power: 60 KVA -

Condition: good (used), 2 x power module 26.50.65 H , 6 x multi-axis servo amplifier M7 26.50.33 , 2 x multi-axis servo amplifier M8 26.50.17 , 3 x linear motor SIEMENS 1FN3 150-3WC00-0Aa1 Nsdpfxsq Sppyo Akysla

Year of construction: 2000, condition: good (used), maximum load weight: 5,400 kg, bar diameter (max.): 40 mm, wall thickness: 50 mm, machine/vehicle number: 26130, CNC Controlled Axis: 'X' Axis Travel 0-18,000mm; 'Y' Axis (R.Hand Horizontal Drill Head) 10-450mm; 'Z' Axis (L.Hand Horizontal Drill Head) 10-450mm; 'V' Axis Travel (Vertical Drill Head) 20-895mm; 'R' Axis Travel (Saw Mitering) + 45 Degree to -60 Degree; 'S' Axis (Sawing Stroke) 0-450mm; Maximum Position Speed: 'X' Axis 50 Metre/ Minute; 'Z' Axis 10 Metre/Minute; 'V' Axis 10 Metre/Minute; Hydraulic Power Packs to suit both machines; Electrical Control Enclosure for Power Electric Equipment, Central Gears for Drive Units & Electronic Equipment; Nljdpfxsqcu Euj Akyja Drill & Saw Line regularly serviced; Drawings of electrical circuits, controls and Manuals available; Service & repair reports all available on request. Weight of Drill Approx 6,000kg; Weight of Saw Approx 3,700kg; Bandsaw Blade size: 7400mm x 41mm wide; Weight of Electrical Cabinet Approx 700kg; Weight of Pincher with Carriage Guide Approx 800kg; The client may offer help to dismantle and remove the equipment. The footprint of the complete line is around 40 metres including the conveyor feed belt.

Condition: used, functionality: fully functional, KEB F4 frequency inverter. Used condition. Fully functional. 2 units available. Nsdpfx Akjxu N Uwjyola

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) Nsdpeyrp Umjfx Akyela • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: excellent (used), Turntable length: 3330 mm Max. load capacity: 500 kg Rotational speed: 16 rpm PANASONIC robot – serial number A0225 M Max. payload: 6 kg Reach: 1374 mm Nlsdpfjw U Agbex Akyja Control unit: YA-1TCR61E00 Safety cabin with ALBANY ASSA ABLOY doors Dimensions: 9400 × 2600 × 2900 mm Weight: approx. 5000 kg

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are offering an almost-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Assurance System. EYE-CATCHING LISTING DESCRIPTION Like New – Immediate Availability – Competitively Priced – Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New – Hardly Used This EyeC Proofiler 1200DT print inspection system is in excellent condition, barely used, and fully functional. Originally purchased for €63,000. An excellent opportunity to acquire a high-end inspection system at a significantly reduced price. ✔ Print-to-print & print-to-file comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing sectors The machine is installed and available for on-site testing. Additional photos and video are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – export-ready ⚠️ Serious inquiries only – prompt decisions preferred 📧 Contact us now to discuss price and details ▪️ Inspection Type: Print-to-print & print-to-file comparison ▪️ Application: Print inspection and quality assurance ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line-scan camera ▪️ Illumination: Integrated LED lighting system Nodpeyxfrpsfx Akyjla ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-controlled system ▪️ Speed: High-speed automated inspection ▪️ Industry: Pharmaceutical, packaging, and commercial printing The system is currently installed and available for demonstration upon request. For any questions or further information, feel free to message or call us. You can also reach out via email or WhatsApp.

Condition: excellent (used), Digital printing system for carpet and textile printing ChromoJet is a valve-based jet printing technology that was developed by ZIMMER in 1976 and has been firmly established in carpet printing and printing on heavy textiles ever since. The digital printing systems in the ChromoJet family are suitable for all types of pile products in the 300 to 1,500 gsm range. ChromoJet works with high-speed valves. The pre-mixed, pressurized special or process inks are injected with injected deep into the surface of the pile with surgical precision, without any machine parts touching the fabric. The result is the deepest color penetration and outstanding print resolution. Dye classes: Acid and pre-metallized - for printing on polyamide (nylon) and wool Dispersion - for printing on polyester-based carpets Cationic - for printing on modified (cationic) polyester and acrylic fibers Reactive - for printing on polyamide, wool and cotton-based carpets and mats Applications Floor coverings such as carpets, rugs, carpet tiles, mats Machine data: Max. Fabric width 1100 mm Max. Print width: 1150 mm Number of colors: 8 per nozzle type Number of carriages: 1 Number of nozzles per color: HSV200: 4 / HSV400: 8 / HSV800: 8 Total number of nozzles: 160 Pattern resolution: HSV200: 1.667 mm dot size HSV400: 1.0 mm dot size HSV800: 0.5/0.33/0.25 mm dot size Electrical data: Connected load : 7 kVA approx. 10 A Mains voltage: 400 V, 3-, 50 HZ Control voltage: 24 VDC Max. Short-circuit current: 10 kA Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! Nodpfx Akouzgzceyjla International shipping costs on request!

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Nljdpfoi Huzxjx Akyea Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition