Used Zeiss Zeiss Wmm Series for sale (3,643)

Condition: ready for operation (used), Joystick box for Zeiss C99 controls. Tedpofh Dpmjfx Ahmsc Box without speed override: €750.

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Todpfx Aet T Uavshmsc

Condition: used, Year of construction: 1988, Zeiss WMM 850 Year of manufacture: 1988 Tedpfx Ahoxurcdsmjc Completely overhauled by Zeiss in 2008 • I purchased the machine in 2008 fully overhauled by the manufacturer. It has seen little use since then. • The machine is not operational, as a defect in the motherboard of the PC prevents the software from being reinstalled. • Furthermore, the software is discontinued by Zeiss and must be replaced with a current version. • The price for new software including hardware and training is €29,100 (as of March 2024). This offer was tailored to my needs and is provided for informational purposes. • Since the machine has been used very little, there is virtually no wear on the bearings and drives. • A set of probes from the basic equipment is included; only a few of these have ever been used.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ZEISS Comet®LƎD 8M, workpiece weight (max.): 5,000 kg, workpiece length (max.): 1,000 mm, workpiece height (max.): 1,000 mm, workpiece width (max.): 1,000 mm, ZEISS Comet®LƎD 8M Todpszwk Nbsfx Ahmsc

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Tjdpfxszvrmxs Ahmjc Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Tsdpfx Ahjy T N H Tomsc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. Tsdezwu Alspfx Ahmjc An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: ZEISS VAST XXT TL3. ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Todjzuur Iepfx Ahmoc Condition details: New, never installed/used Complete accessory set as pictured

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis ZEISS Prismo Navigator 7 was manufactured in 2012. It features a maximum permissible error of 0.9 + L / 350 µm, ensuring high precision in measurements. If you are looking to get high-quality coordinate measuring capabilities, consider the ZEISS Prismo Navigator 7 CMM machine we have for sale. Contact us for further details. Tedpfxez Hk Rhe Ahmec - Axis Travel / Measuring Range (X / Y / Z): 900 mm / 1500 mm / 700 mm- Maximum Permissible Error (E 0, MPE): 0.9 + L / 350 µm- Calibration Date: 16.05.2023- Next Inspection Expiry: 2023-10- Testing Body: 3D Lasertec GmbH, Aalen, Germany- SKU: AT-MEA-ZEI-2012-00001- Additional Components: Control console with twin joysticks, PC workstation, stylus rack/changer system, calibration sphere

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, ZEISS GOM ATOS Q Professional 8M – 8M 3D Scanner + MV170/MV350 + ROT350 – Like New _____ For sale is a GOM ATOS Q Professional 8M optical 3D measuring and scanning system, purchased new in 2021. Complete system includes: Todpfx Ahez D E Enjmjc • GOM ATOS Q Professional 8M 3D scanner • 8 MP camera system • MV170 measuring volume • MV350 measuring volume • GOM ROT 350 rotary table • Calibration equipment and calibration panel • Original GOM mobile stand with adjustable sensor arm • GOM software with license dongle • System backup • Original GOM documentation and manuals • Original calibration / acceptance documentation • Connection cables and accessories shown in the pictures  The system can be inspected and demonstrated in operation by appointment. The system is in excellent, like-new condition and has seen extremely little use. It was used only a few times for the dimensional inspection of small precision medical plates/components. The system was purchased new and has remained in a professional quality-control environment at a high-precision CNC manufacturing company. The ATOS Q is a professional optical 3D measuring system designed for high-precision dimensional inspection, quality control, CAD comparison, first article inspection and reverse engineering. Due to its extremely limited use, the complete system is in excellent condition and is practically like new. • Year: 2021 • Condition: Extremely low usage - like new – used only a few times for dimensional inspection of small precision components. • Location: Trnovec Bartolovecki, 42202, Croatia • Availability: Immediately • Price: price on request Additional photographs, documentation and technical information are available upon request. Original purchase documentation is available. Manufacturer: GOM GmbH / ZEISS Model: ATOS Q Professional 8M Type: Industrial optical 3D measuring / scanning system

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Almost unused professional 3D scanner. Tsdpfx Ajz Ep I Aohmsc

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021, version 7.2.08 Last major maintenance including calibration: 02/2026, performed by Zeiss Condition: used / operational Machine type: Coordinate measuring machine AVAILABLE FROM JANUARY 2027 Disassembly and transport are to be arranged by the buyer. Tedpfsz Duv Aox Ahmec If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2022, operating hours: 1,529 h, condition: ready for operation (used), Optical measurement machine manufactured in 2022. This ZEISS ATOS Q 12M features dual 12-megapixel CMOS cameras with a resolution of 4112 x 3008 pixels. It includes multiple measurement volumes, with the largest measuring 500 x 370 x 320 mm. The system operates efficiently with a maximum rotary table load capacity of 150 kg. If you are looking to get high-quality optical measurement capabilities, consider the ZEISS ATOS Q 12M machine we have for sale. Contact us for further details. Tsdpfx Ahoz D Etrjmsc - Camera Resolution: 2 x 12-Megapixel CMOS Cameras (4112 x 3008 pixels)- Operating/Worktime Hours: 1,529 h (Overall work time / Overhaul work time)- Measurement Volumes (MV) & Specifications:* MV50: 50 x 35 x 20 mm; Point Spacing (12M): 0.012 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 90 mm; Projector Lens Focal Length: 60 mm; Ref Points: Ø 0.4 mm; Calib Object: CP40/MV60* MV100: 100 x 70 x 60 mm; Point Spacing (12M): 0.029 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 50 mm; Projector Lens Focal Length: 27 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV100* MV170: 170 x 130 x 130 mm; Point Spacing (12M): 0.044 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 35 mm; Projector Lens Focal Length: 20 mm; Ref Points: Ø 0.8 mm; Calib Object: CP40/MV170* MV270: 270 x 200 x 200 mm; Point Spacing (12M): 0.064 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 25 mm; Projector Lens Focal Length: 14 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV350: 350 x 260 x 260 mm; Point Spacing (12M): 0.091 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 16 mm; Projector Lens Focal Length: 10 mm; Ref Points: Ø 1.5 mm; Calib Object: CP40/MV320* MV500: 500 x 370 x 320 mm; Point Spacing (12M): 0.124 mm; Measuring Distance: 490 mm; Camera Lens Focal Length: 12 mm; Projector Lens Focal Length: 6 mm; Ref Points: Ø 3.0 mm; Calib Object: CP40/MV560- Actual System Operating Temperatures (Status Screen):* temp0 Monoboard: 44.0 °C* temp1 Timber: 25.5 °C* temp2 Air: 21.7 °C* temp3 LED: 36.0 °C* temp4 Frame-P: 27.8 °C* temp5 DMD-P: 29.4 °C* temp6 Lens: 29.7 °C- Fan Speeds: Electronic Fan: 4237 RPM; Lamp Fan: 4359 RPM- System Orientation: Pitch: 14.9°; Roll: -3.7°- Rotary Table Load Capacity: Max. 150 kg (or max. 40 kg depending on setup configuration)- Tilt and Swivel Unit Load Capacity: Max. 5 kg- Mobile Workstation Laptop Spec (Dell Precision 7760): 17" Display, 64-bit Intel 2.6 GHz Octa-Core CPU, 64 GB RAM, NVIDIA Quadro OpenGL Graphics, 1 TB SSD, I/O: Wi-Fi, LAN, 3x USB 3.2 / Thunderbolt 4- Included Accessories & Equipment: Tripod, 4 measurement fields (MV50, MV100, MV270, MV500) with calibration plates, Rotary/pan unit with lift, Rotary table with 19" control unit, Mobile controller, Converter box with image processing card (fiber optic to Thunderbolt 3), Carrying case, Power supply, Dongle-based software license

Condition: excellent (used), Year of construction: 2016, Zeiss Prismo 7/9/5 Navigator Co-Ordinate Measuring Machine (CMM) With MASS (Multi Application Sensor System) Todpfxez E Rxij Ahmjc Measuring Range 'X'=700mm, 'Y'=900mm, 'Z'=500mm. Accuracy From 0.9 + L/350 µm. Temperature Range 19-22°C. Granite Table Dimension 1,200 x 830mm. Distance Between Columns 930mm. Height Under Bridge 725mm. With Vast-G-D2 Probe Scanning Head, Zeiss MCC800 Control, 5 Position Probe Rack, 5 Zeiss Styli, Joystick Control, Boxed Calibration Sphere, PC, Monitor, Keyboard, Mouse, CMM Accessories & Manuals. S/No. 197784 (2016).

Condition: excellent (used), Year of construction: 2020, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 800 mm, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020. Type: CMM CONTURA 9/18/8 Year of manufacture: 2020 Operating voltage: 100–240 V Frequency: 50–60 Hz We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one. The data, taken directly from Zeiss's service log (as of June 2025): - 10,284 operating hours Todpjzuzf Iefx Ahmjc - 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km) - Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it - Zero significant component replacements - Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it. Probe head: VAST XT Gold Software: Calypso CNC 7.2 + QS-Stat-out Included accessories: PC, monitors, sensor rack Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories. Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary) It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use. If you have any questions or need further information, please send us a message or call us.

Condition: good (used), Year of construction: 2012, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2012 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Tsdpfouq Nfhex Ahmoc Possible services: delivery, commissioning

Condition: used, Year of construction: 2011, functionality: fully functional, Auriga 60 Computer-Controlled FE-SEM with patented GEMINI® electron optics and field emission cathode, designed for analytical applications and high-resolution imaging under high-vacuum conditions. Year of manufacture: 2011 FIB column type: Cobra FIB column SEM column type: Schottky field emitter Installed detectors: • SESI (commercial) • InLens • ESB • 4QBS (pneumatic) • STEM (pneumatic) • EDX X-MAX 80 mm (Oxford) • EBSD (HKL Channel 5) • Charge compensation Gas injection system: Platinum Maintenance report: The system has been serviced annually, with a service report provided each time. Operating hours: 13,290.33 hours (with current filament) PC and software included: Yes Included components: All pumps, cooling systems, and control units are included, except for the dampers. Todezz H I Ispfx Ahmoc Software Version: • SEM: SmartSEM Version 6.00 (June 9, 2016) • EDX: INCA software package – Version 5.03 Price: Negotiable price excluding VAT and delivery

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system Tedjzwvk Repfx Ahmsc For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC Coordinate Measuring Machine Prismo 9/15/7 VAST GOLD Year of Manufacture: 2000 Retrofit 2024, Last DAkkS Calibration 12/2021 Measuring Range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition. Device features, equipment: C99 control system with BP26 control panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR 10-position VAST Probe changer turret 8x VAST Reference probe Temperature probe Probe accessories Calibration sphere Tsdjzq U Rcjpfx Ahmjc HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: QS-Stat Calypso upgrade and further options available Additional accessories and options available Available for immediate delivery.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Equipment: type plate available, Eclipse 7/7/6 CNC Technical specifications: Measuring range X = 700 mm, Y = 700 mm, Z = 700 mm C99 control system with BP26_SE operating panel Renishaw TP20 probing system Todpfx Ajz Egllohmsc Equipment: Calibration sphere Probing accessories HP computer with 27" monitor Software: Calypso Basic 2017 CNC Preset module Freeform surface Upgrade to the latest version possible The machine is in excellent technical and visual condition and has very few operating hours. Available immediately.

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel. Tsdpfx Aheyybkwomjc

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm Tedozr I R Eopfx Ahmec In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Further accessories and options available Available for immediate delivery

Year of construction: 2022, condition: good (used), Year of manufacture: 2022 Serial number: 3849016657 Reference: 431030-9040-000 Previously serviced/supplied by Mikroskop-Center.de, Germany Tedez Eztdopfx Ahmjc The system is in very good cosmetic condition and has been set up and tested for digital imaging. The Axiocam 305 Color camera is recognized by ZEISS ZEN software and live imaging is functional, as shown in the pictures. The microscope is configured for both transmitted light and fluorescence applications and is suitable for cell culture, biological research, routine microscopy, and fluorescence imaging. Configuration includes: - ZEISS Axio Vert.A1 inverted microscope - ZEISS Axiocam 305 Color digital camera - Fluorescence illumination module - Fluorescence filter positions: - DAPI - GFP - Cy3 - BF / Brightfield - ZEISS LD A-Plan 5x / 0.15 Ph1 - ZEISS LD A-Plan 10x / 0.25 Ph1 - ZEISS LD A-Plan 20x / 0.35 Ph1 - ZEISS LD A-Plan 40x / 0.55 Ph1 - Phase contrast system - Mechanical specimen stage - Binocular observation head - Lenovo ThinkPad laptop - ZEISS ZEN 3.14 / ZEN Lite installed - Camera connection cable - ZEISS accessories and documentation shown in the pictures

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Todpfsyc H Npox Ahmoc Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan

Condition: used, Year of construction: 2002, Temperature range 140 °C heating capacity 8,0 kW Cooling capacity 30 kW Tsdszu Tgdepfx Ahmoc range L-W-H 0,70x0,20x0,50 m weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C --> Definition and structure