Used Zerbst Wmw Dp1 / Dp2 for sale (1,227)

Condition: good (used), total length: 2,035 mm, total width: 1,565 mm, plate height: 255 mm, Manufacturer: ZERBST Type: DP1 / S2 & DP2 / S3 & DP3 / S3 Year of manufacture: 1988 Njdpfx Agowp H Awo Dowf Specifications Metric US Standard Length 2035 mm Width 1565 mm Height 255 mm Weight per plate approx. 1200 kg Number of matching pieces 4 Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you verify all critical details.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Nedpeyvt H Aefx Ag Dswf Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 3500 mm weight approx. 22 tons Nedpsv Hx R Nofx Ag Djwf

Condition: used, Year of construction: 1961, faceplate diameter 3500 mm turning diameter 4000 mm Nsdpsyqvczefx Ag Dowf centre distance 16000 mm turning speeds 0,71-33,5 U/min Rest 2 max. workpiece weight -without tailstock 6300 kg max. workpiece weight between centres 18000 kg total power requirement 31 kW weight of the machine ca. 60 t dimensions of the machine ca. 22x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1975, Technical details: faceplate diameter: 3150 mm working area: Ø 4000 mm centre distance: 8000 mm center height: 2240 mm spindle bore: 100 mm revolution per minute: 1,4 ... 71 U/min max. torque on the spindle: 6300 kpm / ca. 61.781 Nm kpm / Nm feed range: plan+längs: 0,355 ... 31,5 / 14 step / R20/3 mm/min rapid traverse speed: 2,0 m/min tailstock quill taper MT: Größe 100 tailstock travel: 400 mm max. workpiece weight between centres: 20.000 kg max. workpiece weight -without tailstock: 8.000 kg main drive motor: 34 kW weight of the machine ca.: 44,1 t space requirements approx. LxWxH: 8,0 x 4,7 x 2,72 m Delivery consists of the following components: Headstock with faceplate and main drive 2x support Tailstock Plate fields (3x3.0 meters in a row and 4 additional plate fields) 1x steady rest Ø approx. 350mm 1x steady rest Ø approx. 650mm Support travel (large) X=550mm and X0=220mm / Z=2600mm and Z0=400mm Support travel (small) X=170mm and Z=340mm i.D. * Nwjdpsvbhiqjfx Ag Dof

Condition: used, Technical details: Nwjdpfx Agsyyb Nts Dsf weight: 1900 kg 2 x steady rests for WMW DP2 No.1 & No.2 price per piece *

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: 450 mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min Nwodowtctyopfx Ag Dsf bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Nedpfxjy Hk T Ie Ag Djwf

Condition: used, Year of construction: 1984, functionality: unexamined, Single-column press 250 t has not been used. Sold on behalf of customer. Inspection possible by appointment. Nwjdpsy Hgk Ajfx Ag Dsf

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2219, center height: 260 mm, A very well-preserved external cylindrical grinding machine with internal grinding attachment Manufacturer: WMW Schleifmaschinenwerk GmbH Chemnitz Model: SA6/1Ux1000 Nwodpfxoy Hdqme Ag Dsf Centre height: 260 mm Grinding length: 1000 mm Machine number: 2219 Machine weight: 5900 kg Includes internal grinding attachment

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Nwedoy Endhopfx Ag Dsf Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Njdpey Enc Dofx Ag Dswf Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1975, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, ram plate width: 500 mm, ram plate length: 630 mm, Pressure: 250 t Nedey Emv Ajpfx Ag Dowf Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t Nwsdpfjy Emvpsx Ag Def

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Nsdpsy Emu Esfx Ag Djwf Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Nsdpfjmi Rpiox Ag Djwf 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS Nwjdpfxov H D N Re Ag Dsf

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition Nodpfxjhv A A Dj Ag Djwf

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 60,000 kg, wheel width: 4,300 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, position of the milling head: 0,02, table diameter: 3,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 6,000 mm, wheel diameter: 4,300 mm, total height: 7,000 mm, total width: 5,000 mm, workpiece diameter (max.): 4,300 mm, milling spindle length: 2,500 mm, type of input current: three-phase, milling length: 2,500 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, Vertical Turning and Milling Lathe VL 40 CNC Turning Center’s Specifications Nominal Turning Envelope Nsdpfx Ajy Dfraeg Dewf Faceplate Diameter 3.500 mm Machining Diameter: -maximum -minimum 4.000 mm 0 mm Swing diameter 4.000 mm Machining Heights 2.000 mm Work Piece Weight 60,000 kg Nominal Turning Travels X - Axis Ram Carriage From -100 mm To 2.250 mm + ATC travel Z - Axis Ram 1.500 mm Work Table WorkTable Diameter 3.500 mm Normal face plate with T-slots Work Table Speed: -for machining 1 - 110 rpm Power Continuous S1/ S6 57/75 kW Torque Continuous S1 / S6 70,000 / 90.000 Nm Turning main drive mechanism Gear box reducer and belt transmission, C axis drive Work Table Milling Speed 0.02 to 2 rpm Milling Torque Continuous S1 43,000 Nm Locking Table Torque (hydraulic double side devices) 60,000 Nm Z - Axis Ram Turning & Milling Ram Ram Size 300 x 300 mm Tool shank size: Shank 32*32 / 40*40 mm automated tool clamping Ram Speed 0 to 2.500 rpm Power Continuous S1 22 kW Torque Continuous S1 1.400 Nm Driving mechanism ZF gearbox, two stages, belt transmission ZF gearbox and main spindle bearing sets are supplied with coolant systems, individually for each. Tool taper BT 50 DIN 69871 / automated tool clamping Tool Storage Number Of Tool Magazines two ATC -one for left side, 20 turning/milling/drilling stations -one for right side 20 milling/drilling and part probe Tool Storage 20 + 20 ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum Singular Tool Weight – milling/drilling toolholder Total Tool Weight Maximum tool size – turning Maximum tool size – milling Maximum tool size - drilling Maximum length 50 kg 25 kg 600 kg 250 x 150 mm Dia. 300 mm Dia. 120 mm 600 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Power Continuous S1 11 kW Axes Rates X And Z - Axes Feed Rates 0.02 to 6,000 mm/min X And Z -Axes Rapid Rates 10,000 mm/min Coolant System Coolant Tank Capacity 2.000 L Coolant Pressure / Flow Rate: -internal coolant (turning) -internal coolant (milling) / pressure adjustments steps Filtration unit: -type 6 bar at 100 LPM 30 bar at 60 LPM Cartridge type Chips conveyor Conveyor type Hinged , frontal placed

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Nwodpfx Agoy D A Nie Dsf

Condition: excellent (used), functionality: fully functional, BFT 90/5-2 CNC SINUMERIK 840D/840DE Technical Specifications Drilling Spindle Diameter: 102 mm Tool Holder: ISO 50 Operating Manual (see photo) Machine Type: Floor Type Boring Mill Manufacturer: UNION KARL MARX STADT Model: BFT 90/5-2 Year of Manufacture: 1989 Control System: CNC Country of Origin: Germany Freight Terms: Ex-works Rostock, loaded free of charge, unpacked Location: Rostock Availability: Immediately Price: On request Technical Details Spindle Diameter: 102 mm X-axis Travel: 1600 mm Y-axis Travel: 1210 mm Z-axis Travel: 980 mm B-axis (Table): 360° Drilling Depth: 710 mm (W-axis) W-axis (Longitudinal Spindle Travel): 710 mm Table Load Capacity: 2.5 / 3.0 t CNC Program Control: Numerik CNC Table Size: 1000 x 1120 mm Feed Rate (x/y/z/w): 1 - 3180 mm/min Njdpfx Agjy Aiars Djwf Tool Clamping: ISO 50 Rapid Traverse (x/y/z): 4000 mm/min Rapid Traverse (w): 3150 mm/min Maximum Spindle Speed: 4–1600 rpm Total Connected Load: 27 kW Machine Weight approx.: 9700 kg Electrical Cabinet Dimensions: L: 2500 x W: 650 x H: 2200 mm Machine Dimensions (LxWxH): 5.2 x 3.3 x 2.8 m Additional Information Further Features: - Thread tapping via Z-axis possible - Coolant system with pump - Hydraulic unit

Condition: used, functionality: fully functional, Column drilling machine Nwedoy A Sz Sjpfx Ag Dof Tool holder MK 4 With gear transmission, quill feed.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Nwjdpfxjy Ar Nis Ag Def Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm Nwjdpfount Egex Ag Dof clamping length 1000 mm weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Njdpfsx U Ectsx Ag Djwf Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m