Used Zlt 500 500/120 for sale (23,758)

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm Pjdpfsma Dkfjx Abgjra max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Year of construction: 2010, condition: excellent (used), Splash guard 24830 Diameter 500 mm Height 115 mm Taper 120 mm Pedod Tyu Eepfx Abgora Estimated age

Year of construction: 2010, condition: excellent (used), Measuring column in a suitable transport case Height: 500 mm Diameter: 120 mm Prsdpsfdzvasfx Abgea Weight: 37 kg

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Predpfxjzv Rixo Abgoa Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 84,788 h, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Screw Diameter: 40 mm (Selected option) • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN Podpfx Absy Hhwdogsra • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm • Max. Platen Distance: 800 mm • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: used, Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Encoder: Type IRC 120/500 -Shaft: Ø 5 x 14 mm -Quantity: 1x encoder available -Dimensions: Ø 57 x 134 mm Predpfx Abeqz Akiegsa -Weight: 0.5 kg

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cubes: heavy-duty version, 4 pieces -Length: 500 mm -Material: Steel -Submission/Price: complete -Dimensions: 500/120/H160 mm each -Transport dimensions: 500/480/H160 mm Predjyuu Uwjpfx Abgea -Weight: 207 kg

Condition: used, Year of construction: 1997, Centerless grinding machine BOCCA MALANDRONE R 120/500 CNC GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x508 mm Podpfjhzvkwjx Abgsra Regulating Wheel Dimensions: Ø355xØ152,4x508 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 96,830 h, clamping force: 1,200 kN, screw diameter: 40 mm, injection pressure: 1,300 bar, injection weight: 231 g, Engel Victory 500/120 Tech (145) without hopper General information Product Code: 145 Availability: In Stock Prjdpfx Asvt Sbbobgoa Year of production: 2004 Brand: Engel Technical data Shot Weight: 231 g Clamping Force: 1,200 kN Screw dia: 40 mm Injection pressure: 1300(2020) bar Tie bar distance: Tie-bar less Platen size: 740 x 680 mm Type of controls: CC200 Language: German Power: 41 kW Workinghours: 96830 h Weight: 7400 kg Dimensions: 5 x 1,7 m Hopper: No Core pull: Yes Euromap: Yes

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Prodpfx Asymn Inebgea Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Prsdpsfbmqtjfx Abgoa Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. Prjdpfx Ajq Nx Nnsbgja 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: used, mileage: 693,000 km, power: 368 kW (500.34 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania 500 S 4x2 semi-trailer tractor, Euro 6d, S cab with 2 sleeping berths, roof and side spoilers, chassis fairing, 2 tanks (500L/700L), ACC adaptive cruise control, lane keeping assist, collision warning system, differential lock, leather seats, auxiliary air conditioning, auxiliary heater, seat climate control/seat heating, air suspension, load indicator, air horns, xenon headlights, Scania multimedia entertainment system, navigation system, Alcoa alloy wheels, CB radio, EFH (electronic fifth wheel coupling). Prodpjzwi Ucofx Abgea Available in quantities of 2. First owner.

Condition: used, Year of construction: 2015, A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible. Prjdpezwnzbofx Abgsa

Condition: used, Year of construction: 1999, Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Psdpfx Aok Abqxjbgera Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Locker changing room 1800 x 1200 x 500 RA2221 Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm Predpsu Sphtjfx Abgea different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 199,419 km, power: 154 kW (209.38 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 5,960 kg, maximum load weight: 6,030 kg, overall weight: 11,990 kg, tire size: 245/70R19,5, axle configuration: 4x2, wheelbase: 5,670 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 49 m³, loading space length: 8,620 mm, loading space width: 2,500 mm, loading space height: 2,320 mm, front tire size: 245/70R19,5, rear tire size: 245/70R19,5, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), onboard computer, tail-lift, traction control, Iveco Eurocargo 120-210 E6 Box Van - Body dimensions (L x W x H inside) 8.62 x 2.50 x 2.32 m - Box van body - Automatic transmission - Engine brake - Cruise control - Suspension: leaf / air - Electric mirrors + power windows - EURO 6 - Payload: 5,030 kg - Tires: 265/70R19.5 Very good condition. Export price. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information should be seen as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français Pedpfxjztdy Sj Abgsra - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: new, height of stroke ca. 700 - 1000 mm Prodpfxszugg Rj Abgoa 0 500 kg

Condition: used, Weinig LTB 120/4500 feed conveyor, discharge conveyor or connecting conveyor Technical data: Prodezrx Iuopfx Abgsa - Conveyor belt length: 4,500 mm - Conveyor belt width: 120 mm

Condition: new, Year of construction: 2026, neu 2026 070236 September 2026, Zwischenv Türkei 6900 € 133.17 € 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm Podpowirmujfx Abgera 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: good (used), Year of construction: 2001, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1200 -Speed: frequency controlled, up to approx. 160 m/min -Drive: SEW-Eurodrive 0.055/0.55 kW i= 3.83, see photo of nameplate -Voltage: 380-500V -Brake: 5 Nm -Strap width: 500 mm -Conveying length: 848 mm -Quantity: 3x conveyor belt available -Price per piece -Transport dimension: 860/700/H415 mm -Weight: 62 kg/pc. Prjdpfx Asrnuy Sjbgja

Condition: used, Year of construction: 1984, conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Predpfxsvmndxo Abgoa -Manufacturer: KJ, -Type: KA69 500B -Speed: 8.3 m/min -Belt width: 500 mm -Conveyor length: 11200 mm -Drive: Drum motor, see photo type plate -Transport dimensions: 11200/1170/H230 mm -Weight: kg

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth Predpfx Asgiiw Rsbgea -Weight: 6 kg

Condition: used, Year of construction: 2001, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1200 -Speed: frequency controlled, up to approx. 205 m/min -Drive: SEW-Eurodrive 0.055/0.55 kW, see photo of nameplate -Voltage: 380-500V -Brake: 5 Nm -Strap width: 500 mm -Conveying length: 848 mm -Quantity: 2x conveyor belt available -Price per piece -Transport dimension: 875/700/H345 mm -Weight: 64 kg/St. Pedpfxop Ta Uvo Abgjra

Condition: used, Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm Podob N Ulkopfx Abgjra -Weight: 70 kg