Used Zopf Brt 100 for sale (22,862)

Year of construction: 2024, condition: new, flat iron bender Dodpfx Adsfmy Ahe Nsut model BRT 100 Zopf

Condition: new, 100 mm roll diameter 315 mm bending speed 5 m/min bending capacity - flat iron max. 12 x 20 mm 75 mm Drive 11 kW weight 2.600 kg range L-W-H 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage Dodpfx Ajy H N Ided Nout - Footswitch - standard roller set

Condition: new, roll diameter 215 mm shaft diameter 60 mm Shaft revolutions 6 U/min 100x2 mm 80x15 mm pressure hydraulic cylinder 180 kN total power requirement 2,2 kW weight 720 kg dimensions 1200x900x1700 mm Accessories / Equipment: Djdpfsy H N E Aex Ad Nout - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, shaft diameter 60 mm Shaft revolutions 6 U/min roll diameter 215 mm pressure hydraulic cylinder 180 kN dimensions 1125x870x1620 mm weight 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function Dedpfx Aey H N Evsd Neut - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars Doded Eyz Uopfx Ad Neut - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal Dodpfx Adex I Afxj Nsut - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical Dusdped Ey A Asfx Ad Net - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 - demo model - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) Dedpfx Ajdibyged Nout with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2025, Angle Bar Bender manual Duedpfxofhdfve Ad Not Model 100 E German quality Capacity cold (St 37): steel up to 100x6 mm solid round 18 mm with length stop with 2 Radius-toolings weight around 27 kg

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers Dujdovaw Elopfx Ad Nst - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 1000 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm Dujdpfxjxpf R Dj Ad Not - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x34 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 2300 kg - colour RAL5012 / RAL7015 - bending capacity: Dodpfsg Anurjx Ad Nsut flat material max. 300x32 mm (V200) round tube 3/8" - 3"

Condition: new, Year of construction: 2025, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter ⦁ Suitable for all standard materials ⦁ Designed for pipes and profiles - Operation via eccentric lever Duedpfx Adjx Irvms Nst - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm - Weight 200 kg

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Hovuma Included in the delivery: 01x Pallet rack beam, used Color: blue INP profile: 100 x 50 mm End connector: 2 hooks Clear span: 2,600 mm Max. load per beam pair: Djdpey N Uhbsfx Ad Njut 3,000 kg with evenly distributed load 02x Locking pins, used Version: fully galvanized For securing the beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping beyond this is subject to additional costs, which can be requested from us depending on the place of delivery and the scope of delivery.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 Djdsy Ixbcopfx Ad Nout - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, CMU press brake 4000 x 100 ton, model BT 100/40, motorised backgauge, PRG 920 – 2 programmable axes, clamping devices, used and working machine, internal code: SVR 418. Duedpfjy Nc Ehjx Ad Nst

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Dujdoyizxropfx Ad Net Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition Dedpfx Aeyxtf Rsd Neut - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Dedpfjw Rr A Dsx Ad Njut

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set Djdpfx Adoyc H I Ss Nsut • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: new, 500 kN stroke length max. 300 mm working feed 10 mm/sec return speed 20 mm/sec 700x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm Duedpfx Adey H N Rlj Net bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg dimensions of the machine ca. 86 x 90 x 85 cm Dedpfx Adsy H N Nze Nout

Condition: new, 400 kN stroke length max. 285 mm working feed 9 mm/sec return speed 20 mm/sec 660x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm Dedpoy H N Nhjfx Ad Njut bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: new, 800 kN stroke length max. 285 mm working feed 10 mm/sec return speed 20 mm/sec 750 x 1430 mm work height max. 940 mm total power requirement 4 kW bending capacity max. - flat 300 x 32 mm Djdpfjy H N Nbex Ad Njut bending capacity max. - round 89 x 4,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: Dodpfey H N I Dsx Ad Njut - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used