Universal Machining Centre

Matec 30 HV

Condition: good (used), Year of construction: 2003, Matec 30 HV / 5 axles, Year of construction 2003, Control Bosch type 3 Osa, Travel X/Y/Z 3000/800/1100 mm, spindle speed up to 12,000 rpm, HSK 63 holder, NC swivel milling head +/- 90°, Work table 3500 x 835 mm, integrated rotary table Ø 630 mm, IKZ 70 bar, paper belt filter, chip conveyor, clamping hydraulics, NC rotary table, Prjdpeuhzbzsfx Ac Dec annual maintenance,

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand HEIDENHAIN Model iTNC 530 This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Pedpjxnd Rmjfx Ac Dorc Application Types Milling

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Predpfxjxn Ikde Ac Dsc Rota S Plus 800 chuck by Schunk. The operating hours counter is defective.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: Prodpfx Acsxg D Atj Djc 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: ready for operation (used), Year of construction: 2004, operating hours: 92,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 300 mm, Machine is from 04/2004 and has 92,000 spindle hours. Currently still running. X 3000 mm Y 600 mm Z 300 mm Spindle speed 9,000 rpm Feed rate 3,000 mm/min Tool changer with 48 positions Swivel milling head Without internal coolant Mainly used for plastics. Podpfx Acsxgpgde Djrc

Condition: good (used), Year of construction: 2003, functionality: fully functional, Controller HEIDENHAIN TNC426/430 Table size 3500 x 650 mm Table load 1362 kgs Prodpfxjwtgbbj Ac Djc Travel X=3000 mm Travel Y=800 mm Travel Z=1100 mm Spindle swieveling +/-90 degree Spindle speed 15.000 rpm ATC 48-fold Weight ca 11000 kgs Dimensions LxWxH = 5900 x 4600 x 4500 mm Accessories, features - coolant through spindle 40bar/60l/min (it is recommended for gun drilling too !!!). - swieveling main headstock - additional table - coolant unit - tooling, tool cabinet and accessories shown on pictures.

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 600 mm z-travel 800 mm Control Heidenhain TNC 426 tool changer for ... units 48 turning speeds 9000 U/min feed 3000 mm/min rapid traverse 30 m/min spindle turning speed range max. 9000 U/min tool taper SK 40 total power requirement 15 kW direct spindle power: 11 kW (can be increased by the manufacturer, costs must be paid by buyer) svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door the clamping device shown in the pictures is not included in the scope of delivery! Psdpfx Asvzhc Rsc Dorc

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 19000 kg Movement X-Axis Movement 4000 mm Y-Axis Movement 825 mm Z-Axis Movement 1100 mm Table Table load 4000 kg Turret Number of tool slots 48 Media Internal cooling Yes Additional Equipment Pneumatically opening doors Partition wall for two-field machining Ventilated measuring systems Optional: High-pressure pump (40 bar) and NC rotary table General Data Machine weight 19000 kg Movement X-Axis Movement 4000 mm Y-Axis Movement 825 mm Z-Axis Movement 1100 mm Prodpfoxcqlasx Ac Dec Table Table load 4000 kg Turret Number of tool slots 48 Media Internal cooling Yes Additional Equipment Pneumatically opening doors Partition wall for two-field machining Ventilated measuring systems Optional: High-pressure pump (40 bar) and NC rotary table This 5-axis Matec 30 HV CNC vertical machining center was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel distances with X-axis at 4000 mm, Y-axis at 825 mm, and Z-axis at 1100 mm. It supports a maximum table load of 4000 kg. If you are looking to get high-quality milling capabilities consider the Matec 30 HV machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting Prjdpsxg Dhcofx Ac Dsc - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 15000 Spindle motor power 16 kW Tool taper HSK 63 Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 600 mm Podpfew Nb Slex Ac Derc Z-Axis Movement 800 mm Table Table load 400 kg Tools Number of index 36 Type of tool holder SK40/DIN 69871 or HSK 63-A Media Chip conveyor Yes This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Application Types Milling