Veneer saw

Mayer

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Ijdpfezdnz Uox Anwjic Subject to changes, prior sale, and errors.

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Iiodpszc Rdqofx Anwec

Condition: used, Year of construction: 2022, functionality: fully functional, KARL MAYER PROSIZE - HIGH-PERFORMANCE and INNOVATED SIZING UNIT for processing spun yarns -28 Pos : max. working width in the creel: 2200 mm Isdpfx Anozb Uzwewoic -200 mm : working range -Beam creel :max. beam flange diameter: 1000 mm -Warp Tension Control -Automatic squeeze pressure control With all required accessories.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,689 h, Panel dividing saw Manufacturer Mayer Type PS2 Z Year of manufacture: 2017 Working length: 6500 mm Working width: 6000 mm Thickness: 100 mm Motor: 35 kW Iijdpfx Aszbt Uisnwec With control system Feed rate: 5-80 m/min Return speed: 120 m/min Max. saw blade diameter: 550 mm with 130 mm overhang

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Iijdpfx Anozargnewoc Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 80,773 h, total height: 2,400 mm, cutting length (max.): 3,200 mm, Panel saw manufactured in 2006. This MAYER AL160 features a saw blade diameter of 650 mm and a maximum cutting width of 3200 mm x 3200 mm. It has a main saw motor power of 35 kW and offers variable forward speeds for both the saw aggregate and infeed. If you are looking to get high-quality panel cutting capabilities, consider the MAYER AL160 machine we have for sale. Contact us for further details. - Main Saw Motor Power: 35 kW- Saw Blade Diameter: 650 mm- Package Clamps / Collets: 210 mm maximum- Saw Aggregate Forward Speed: 0.2 - 60 m/min- Saw Aggregate Return Speed: 60 m/min- Infeed Forward Speed: 10 m/min- Infeed Return Speed: 20 m/min- Extraction Connections: 1 x 140 mm, 1 x 160 mm- Working Height: 1100 mm- Installation Dimensions: approx. 6280 mm (W) x 6855 mm (L)- Cutting Width/Length: 3200 mm x 3200 mm- Compressed Air Volume: 720 Nl/min- Operating Pressure: min. 5 bar, max. 6 bar- Component Condition Notes: Requires repair/adjustment on 3 package clamps, dust protection curtain, and cutting lips at the saw gap Ijdozarfwepfx Anwjic

Condition: good (used), Year of construction: 2000, Motorized roller table Isdpfeu Euccsx Anweic MAYER Type:RGM 770-4250 Year 2000 Roller diameter : 70 mm Roller conveyor width : 770 mm Roller height from floor : 760 mm Total length : 4250 mm Good condition .

Condition: used, Year of construction: 1994, Max. cutting length: 3020 mm Max. cutting height: 45 mm Iodpfjy H Hf Hex Anweic Saw blade diameter: 160 - 200 mm Tensioning bar movement: pneumatic Stop indicator: scale, manual adjustment Dust extraction channel: Yes Dust extraction: external dust extraction Feed type: manual Machine type: stationary Weight approx.: 1000 kg Dimensions: 4500 x 1400 x 1200 mm Motor power: 1.8 kW Storage location: Nattheim

Year of construction: 2010, condition: ready for operation (used), Horizontal panel sizing saw offered. Cutting length: 4200mm, cutting height: 90mm, main saw blade diameter: 355x4.4mm, scoring saw blade diameter: 150x4.4mm, feed speed: 5-100m/min, return speed: 130m/min, control system: PC 6100. Equipped with crane connection to MEINERT surface storage system via Ferro Control, air cushion tables. Weight: approx. 5800kg, overall dimensions X/Y/Z: approx. 11100mm/6700mm/2100mm. Inspection possible by appointment. Isdpfsy U Nqzox Anwsic

Year of construction: 1998, condition: ready for operation (used), Industrial panel sizing saw offered. Cutting length: 4300mm, cutting height: 95mm, main saw blade diameter: 355mm, scoring saw blade diameter: 125mm, feed speed: 5-60m/min, return speed: 80m/min, control system: PC 6100. Equipped with integrated crane connection to MEINERT surface storage system (Ferro Control v1.04), left angular table with air cushion, right tilting table for manual feeding, integrated extraction system on package clamp, pressure unit and pressure beam. Weight: approx. 5300kg, overall dimensions X/Y/Z: approx. 12100mm/6700mm/2300mm. Inspection possible by appointment. Iijdpsy U Nqhofx Anwec