Band saw

Meba MebaPro 260

Condition: good (used), Year of construction: 2007, machine/vehicle number: 193568, Offer 24606 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display Kodpfovt Twqox Ad Iodw - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: excellent (used), Year of construction: 2018, functionality: unexamined, Technical data: Machine type F135/F155 Measuring range Distance between C- and Z-axis 270 mm Maximum measurable diameter 320 mm Maximum measurable height 350/550 mm Maximum table load 25 kg Rotation axis (C-axis) Turntable diameter 150 mm Manual alignment of the workpiece Roundness deviation in the rotation plane. Table 0.03 µm + 0.0005 µm/mm Measured height *Roundness deviation in the plane of the rotary table 0.015 µm + 0.00025 µm/mm Measured height axial run-out error 0.04 µm + 0.0005 µm/mm Radius *axial run-out 0.02 µm + 0.00025 µm/mm Radius centering range +/- 2mm Kjdpfxeuh Ufaj Ad Iodw Inclination range +/- 0.6˚ Rotation speed 1-10 rpm Rotary bearing air Vertical axis (Z-axis) Effective height 350/550 mm Straightness deviation 0.15 µm/100 mm (0.3 µm/350 mm/0.4 µm/550 mm) Parallelism of the C and Z axis 0.8 µm/350 mm/1.3 µm/550 mm Anti-collision protection yes Horizontal axis (R-axis) Effective length 170 mm Dimensions Length 700 mm Width 410 mm Height 950 mm Weight approx. 185 kg

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Kdjdpfx Aexddamjd Isw

Condition: used, Year of construction: 2002, cutting diameter 260 mm dimensions of saw-band 4115 x 41 x 1,3 mm cutting range square 260 x 260 mm weight of the machine ca. 2,2 t Remaining piece length: 80 mm Smallest diameter that can be sawn: Ø 8 mm Smallest cut length: 8 mm Minimum remaining piece length, single cut: 30 mm Kdsdpfjxa Hk Tjx Ad Ijw Minimum residual piece length, automatic mode: 80 mm Maximum automatic material feed: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Belt speed: infinitely variable 15–125 m/min Cutting feed: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Equipment: Vibrating table Belt tension monitoring Roller conveyor 3500 mm(roller drive via hand wheel) with guide rollers roll width approx. 320 mm Chip conveyor Subject to errors in the technical data Translated with (free version)

Condition: new, Year of construction: 2024, functionality: fully functional, Machine type: Automatic Mitre Band Saw Band dimensions: 3510 x 27 x 0.9 mm Cutting capacity (square): 250 x 300 mm Cutting capacity (round): 250 mm Bundle cutting: 150 - 250 x 100 - 130 mm Cutting speed: 20 - 80 m/min Main drive motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Ksdpexk Ti Rofx Ad Isdw Coolant pump motor power: 0.125 kW Table height: 750 mm Weight: 1430 kg Dimensions (W x D x H): 2210 x 2290 x 1890 mm

Condition: good (used), Year of construction: 2007, total height: 700 mm, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Kdjdpfxow R Sque Ad Isw Max. stroke 9999 mm Control panel  Memory 99 program with  Bundel clamp device  New price 45.000 Capacity 90°:260° Length: 1800mm Width: 2475mm Height: 1600mm Weight: 1700kg