CNC turning and milling center

MORI SEIKI NZ 2000 T2Y2

Condition: excellent (used), Year of construction: 2009, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: €40,000–45,000. * Both spindles equipped with two high-precision Hainbuch collet chucks. * Opposed-spindle configuration. * 9-axis turn-mill center with full CNC control. * Twin spindles. * Spindle nose size A2-6. * 2 superimposed turrets. * 2 C-axes. * 1 Y-axis. * Two integrated 22 kW spindle motors. * Milling spindle power: 7.5 kW. * Two Renishaw automatic tool setting arms. * Mapps 4 conversational automatic programming system. * Automatic load monitoring and tool consumption monitoring system. * Tool life management and wear monitoring. * Dual foot pedal for chuck open/close. * Oil chiller for both spindles. Fedpfoxu Rrqex Aa Negi * 340 Nm maximum cutting torque. * Both turrets feature 16 stations each, all fully driven. * Up to 32 tool positions per turret possible. * Interface for bar feeder installation. * Automatic rear parts catcher (special gripper type for long parts). * Large selection of external and internal tool holders included. * Extensive package of axial and radial driven tool blocks. * MQ quick-change tool clamping system. * Maximum swing diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III CNC control. * Max. distance between main and sub spindles: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Max. bar diameter: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub spindle slide travel: 920 mm. * Rapid traverse (X1, X2): 30,000 mm/min. * Rapid traverse (Y1): 20,000 mm/min. * Rapid traverse (Z1, Z2): 50,000 mm/min. * C-axis resolution: 0.001°. * Side-mounted hinged belt chip conveyor. * Communication ports: USB, PCMCIA card, RS 232. * Machine weight: 8,300 kg. * Machine can be inspected under power. * Includes electrical transformer, documentation, parts list, electric schematics, programming and operations manuals. * IMPORTANT: Never used with a bar feeder, only for machining aluminum prototypes. * VERY low cutting hours. * Immediate delivery unless sold prior.

Condition: excellent (used), Year of construction: 2011, operating hours: 17,813 h, functionality: fully functional, turning length: 700 mm, turning diameter over cross slide: 750 mm, turning diameter: 366 mm, spindle motor power: 26 W, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, mount diameter: 12 mm, rotational speed (max.): 6,000 rpm, Make Mori-Seiki Moderl NL 2500SY/700 Year of manufacture 2011 Control system MXS 850 IV Data: Max Swing over bed 755 mm Max swing over support 740 mm Max Turning diam. 366 mm Turning length 785 mm Movements X 260 mm Y 100 +-50 mm Z 795 mm Rapid transport X/Y/Z 30/20/50 m/min Spindle power 26/22 kW Spindle speed 4,000 rpm Bar Capacity 80 mm Chuck diameter 250 mm Spindle nose JIS A2-8 Spindle indexing 0.001° Sub Spindle power 11/7,5 kW Sub Spindle speed 6,000 rpm Sub Bar cap. 80 mm Sub spindle Chuck diameter 150 mm Fgodpfowtfwhex Aa Nji Sub Spindle nose JIS A2-5 Sub Spindle indexing 0.001° Number of tools in turret/driven 12/12 pcs. Power driven tools 5.5 kW Spindle speed driven tools 6,000 rpm Machine weight 6,200 kg Machine dimensions LxWxH 4.34 x 2.00 x 2.120 m Equipment: Chip conveyor, 3-jaw chuck Kitagawa BB-210 in main Spindle and a Kitagawa B 206 in Sub Spindle, Part catcher, Various tool holders, Parts catcher, Interface for Bar-Feed, Synchronised threading, The machine has 17800 work hours.

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Fedpfoxq E Ewjx Aa Negi Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading . *

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Fgodpjv E R E Nofx Aa Noi Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm Fgodpfjv Drigjx Aa Noi C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: used, functionality: fully functional, 1 piece used CNC lathe Mori Seiki NZ 2000 with C-axis and driven tools. Further technical data and photos will be added. Fodpfx Asxb T Uzoa Njgi

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, turning diameter: 370 mm, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, type of input current: three-phase, overall weight: 8,950 kg, Equipment: documentation/manual, Turn Mill Center MORI SEIKI NTX1000 SZ TECHNICAL CHARACTERISTICS : Year of manufacturing : 2011 CNC control: FANUC MSX-711 IV Number of simultaneous axes: 5 Max. cutting diameter: 370 [mm] Max. turning length: 424 [mm] Stroke Y axis : 105 Stroke Z1 axis : 460 [mm] Stroke X1 axis : 380 [mm] Stroke Z2 axis : 610 [mm] Stroke X2 axis : 155 [mm] B axis swivelling stroke : 120 [°] B axis indexing precision : 0.0001 [°] Milling head max. speed : 12000 [rpm] Milling head spindle attachment : Capto C5 Max. milling spindle power : 9 [kW] Tool magazine capacity : 76 Max. tool lenght : 250 [mm] Max. tool diameter : 130 [mm] Max. weight of single tool : 5 [Kg] Rapid traverse rate X1 axis : 40000 [mm/min] Rapid traverse rate X2 axis : 20000 [mm/min] Rapid traverse rate Z axis : 50000 [mm/min] Rapid traverse rate Z2 axis : 36000 [mm/min] Rapid traverse rate Y axis : 40000 [mm/min] Spindle nose : JIS A2-6 Spindle throughbore : 73 [mm] Max. spindle speed : 6000 [rpm] Increment C-axis : 0.0001 [°] Spindle power : 11 [kW] Counter spindle nose : G6 flat nose Counter spindle throughbore : 38 [mm] Fgsdpfjwu Rcljx Aa Nei Max. counter spindle speed : 6000 [rpm] Counter spindle increment C-axis : 0.0001 [°] Counter spindle power : 7.5 [kW] Counter spindle torque : 37 [Nm] Max. tool holder cross-section : 20 [mm] Number of tool stations : 10 Total power required : 48 [kVA] Number of cutting hours : 9867 [h] Weight : 8950 [Kg] EQUIPMENT INCLUDED: x1 MAPPS IV operating system x1 KITAGAWA BB208 - Ø208 [mm] chuck x1 blowing spindle chuck x1 KITAGAWA N05 chuck - Ø135 [mm] x1 blowing of counter-spindle chuck x1 through tool spindle coolant x1 chip conveyor (right exit) x1 coolant gun x4 foot pedals (clamping/unclamping chucks 1 and 2) x6 static tool holders x1 3-colours status lamp x1 electrical transformer x1 high pressure collant pump x1 set of axle clamps for transporting the machine x1 set of technical manuals FANUC OPTIONS INCLUDED : x1 A02B-0306-J713 - 31i-A5 3-D Coordinate System Conversion x1 A02B-0306-J815 - 31i-A5 Polar Coordinate Interpolation x1 A02B-0306-J819 - 31i-A5 Helical Interpolation x1 A02B-0306-J828 - 31i-A5 Rigid Tapping x1 A02B-0306-J852 - 31i-A5 CS Contour Control x1 A02B-0306-J926 - 31i-A5 Tool Offset, 99 Pairs x1 A02B-0306-J930 - 31i-A5 Tool Radius (Cutter) Compensation and Tool Nose Radius Compensation x1 A02B-0306-J947 - 31i-A5 Part Program Memory, 1 MB x1 A02B-0306-R512 - 31i-A5 Nano Smoothing II x1 A02B-0306-S676 - 31i-A5 Tilted Working Plane Command - Conventional x1 A02B-0306-S687 - 31i-A5 Nano Smoothing x1 A02B-0306-S737 - 31i-A5 Data Server Function x1 A02B-0306-S808 - 31i-A5 AI Contour Control II Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands mazak , dmg mori , index traub , doosan , hermle , chiron , biglia see also cnc lathe , lathe-milling , milling machine

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 Fodpov E R E Aefx Aa Njgi power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 1999, swing dia. 680 mm max. turning diameter 429 mm turning length 440 mm control MORI SEIKI - MSC-501 turning speeds 5.000 U/min Fodpfjwplulsx Aa Nogi max. bar material dia. 56 mm travel -x axis 233 mm travel -z axis 510 mm number of tapers in turret head 2x12 CNC Turning- and Milling Center | MORI SEIKI - ZL-150SMC equipped with main/counter spindle, c- axis, 2x turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZL 150SMC | ZL150SMC | ZL-150 SMC | ZL 150 SMC

Condition: good (used), Year of construction: 2002, operating hours: 18,000 h, CNC MULTITASKING LATHE MORI SEI MOD. MT 2000 SZ Main Spindle Kw 22 6,000 RPM X/y/z/b Travels: 565 - +/- 80 - 1077 - +/- 120° Fgjdpfx Aju Sg Ausa Noi Milling Head Capto C6 6,000 RPM Motorized Lower Turret 12 Stations Tool Magazine 40 Posts Year 2002