CNC Turning- and Milling Center

OKUMA MacTurn 50

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Travels X-axis: 598 mm Y-axis: 230 mm Z-axis: 1,660 mm Main spindle Speed range – main spindle: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis: 0.001° Fgodsxb Awfspfx Afpoh Feeds Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 min⁻¹ Cutting feed rate X / Z / Y: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) Driven stations: infinitely variable Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Control: OSP 7000 L Space requirements & Weight Approx. footprint: 6.0 x 3.2 x 3.0 m Approx. machine weight: 18.5 t Electrical data Total connected load: 53 kVA Rated voltage: 400 V Number of phases: 3 P Frequency: 50 Hz EQUIPMENT Chip conveyor Central coolant system High-pressure coolant Signal lamp Hydraulic unit Steady rest Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel 44 assorted tool holders

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, turning diameter: 580 mm, spindle motor power: 30,000 W, spindle speed (min.): 14 rpm, spindle speed (max.): 3,200 rpm, spindle bore: 90 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, rapid traverse Z-axis: 20 m/min, Okuma MacTurn 50X1500 CNC Controller OSP 7000L max. turning diameter 580 mm turning length 1500 mm swing diameter over bed 610 mm swing diameter over slide rest 580 mm Main spindle: turning speed range - main spindle 14 - 3200 min/-1 spindle bearing diameter 130 mm spindle bore 90 mm spindle nose JIS A2-11 Fgodpfxsui Ra Dj Afpsh power capacity - main spindel 30 (22) kW C-Axis 0,001 ° axis stroke: x-axis 598 mm y-axis 230 (+110 / -120) mm z-axis 1.660 mm feeds: rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U turret: type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 Tailstock: diameter of quill 120 mm quill stroke 170 mm taper of center MK 5 tool magazin: number of toolpositions 32 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 5,3 x 3,2 x 3,0 m Chipconvyer

Year of construction: 1999, condition: good (used), turning diameter 580 mm turning length1.500 mm X/Z 568/1660 mm Y-axis Fjdoiicllspfx Afpsgh C-axis spindle 3.200 min-1 driven tools 3.000 min-1