CNC turn-mill center

Okuma Macturn-350-2SW-1500

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Iisdpfx Amjwcd Evogoh Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 1985, condition: ready for operation (used), Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible. Isdpfew Duuqex Amgsih

Condition: good (used), total length: 6,000 mm, total width: 1,650 mm, plate height: 300 mm, Manufacturer: STOLLE Type: CAST IRON... Year of construction: 2004 Iiedpfx Amjwpva Esgjh Specifications Metric US Standard Length 6000 mm Width 1650 mm Height 300 mm Number of T-slots 6 Distance between T-slots / spacing 250 mm T-slot size 27 mm Weight per plate approx. 7200 ton Number of matching pieces 4 Dimensions (estimated) Length 6000 mm Width 1650 mm Height 300 mm Weight 7200 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, you will not be given any representation or contract terms. We recommend that you verify all important details.

Year of construction: 2005, condition: ready for operation (used), A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible. Iisdpfxezi Ei Hj Amgoh

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,875 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 900 mm, workpiece length (max.): 1,450 mm, overall weight: 6,300 kg, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control system: Charmilles Millenium Travel ranges (X / Y / Z): 800 x 550 x 510 mm Travel ranges (U / V): 800 x 550 mm Max. conical angle: +/- 30° at a height of 510 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Includes option for a large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg Iiedpfszhlvkox Amgoh The machine will be cleaned, completely overhauled, and tested for all functions after order receipt. Optional: - Commissioning of the machine at your location - On-site training - Cooling unit - Transportation - Clamping device set

Condition: excellent (used), Year of construction: 2008, A KWB Powerfire TDS 150 is a premium Austrian, robust industrial biomass boiler designed for economical and reliable heating of larger buildings and facilities with continuous heat demand. The boiler's output can be adjusted between 45 and 150 kW to match the current heat demand, allowing it to operate efficiently even at partial can be used with both wood chips and pellets, providing a high degree of flexibility in fuel selection. Fully automatic operation The high degree of automation of the KWB Powerfire significantly reduces the need for continuous handling. The moving grate burner system, the lambda probe combustion control, and the cyclone combustion chamber ensure efficient, uniform combustion even when using fuels of varying quality. Main advantages of the system: Automatic output control Lambda probe combustion control Iodpfx Amjzqnp Sjgeih Automatic ignition Moving grate, self-cleaning burner system Automatic heat exchanger cleaning Automatic ash removal KWB Comfort control Robust, industrial design Low operation and maintenance requirement Can be operated with both wood chips and pellets Ideal application areas: Industrial and production halls Agricultural sites Horticultures and greenhouses Hotels and guesthouses Condominiums and larger residential buildings Schools, sports facilities, and public institutions Workshops and warehouses Smaller local district heating systems

Condition: used, Year of construction: 2009, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 Biomass boiler / wood pellet and wood chip boiler, 99 kW, year of manufacture 2009 For sale is a used KWB UNIT USV100 biomass boiler with a nominal thermal output of 99 kW. Dismantling will take place on July 1, 2026, in Austria, 2100 Leobendorf. Dismantling will be carried out professionally by us. Important note: If the buyer takes over and collects the boiler directly after dismantling in Leobendorf on the day of dismantling, we can offer a price reduction, as in this case, transport to Hungary will not be necessary. The KWB Multifire / UNIT series is a robust biomass heating system for wood pellets and wood chips. The system is ideally suited for larger residential buildings, agricultural buildings, commercial properties, public buildings or smaller district heating networks. According to the nameplate, this boiler is designed for wood pellets with a diameter of 6 mm. The KWB Multifire series is basically designed as a wood pellet and wood chip heating system; operation depends on the existing extraction or conveying system. Main features / equipment: * Robust biomass boiler from KWB, an Austrian quality manufacturer * Suitable for pellets / wood chips depending on the extraction and conveying system * KWB Comfort 3 control, automatic and easy operation * Automatic power adjustment according to heat demand * Automatic heat exchanger cleaning with patented special turbulence generators * KWB MultiFlex burner plate cleaning for different fuel qualities * Underfeed gasifier combustion system with high-temperature combustion zone * Optimal combustion through broadband lambda probe and negative pressure control * Automatic ash extraction with ash compaction * Ash container with level monitoring * Gas-tight and backfire-proof fire protection damper * Reliable conveying technology for individual extraction systems * Robust stoker screw with stainless steel spirals and hard metal coating * Low-maintenance, double-sealed heavy-duty gearbox * Suitable for larger heating systems and commercial applications Technical data: * Manufacturer: KWB * Type: UNIT USV100 / USV D * Year of manufacture: 2009 * Operating hours: 30,374 h * Nominal thermal output: 99 kW * Minimum thermal output: 27.6 kW Iisdpfszhh Iisx Amgoh * Fuel heat output at nominal thermal output: 113.9 kW * Fuel according to nameplate: Wood pellets 6 mm * Biomass system: Pellets / wood chips * Max. operating pressure: 3.5 bar * Max. operating temperature: 90 °C * Water content: 167 liters * Smoke pipe connection: 200 mm * Electrical connection: 3N 400 VAC / 50 Hz / 13 A * Max. electrical power consumption: 2328 W * Weight: approx. 997 kg * Serial number: 000-0059085/3 The boiler is sold used, as shown in the pictures. Inspection is possible by appointment. Sale without guarantee and without return. Loading and transport can be arranged by agreement. Current location until dismantling: 2100 Leobendorf, Austria After dismantling: Mosonmagyaróvár, Hungary

Condition: good (used), Year of construction: 2002, MSG-501 control MAPPS (Fanuc) Max. turning diameter: 550 mm Max. turning length: 1,020 mm Iijdpfx Aswwk Uaemgsh Travel axes X1/X2/Y/Z1/Z2/W: 565/160/1,077 mm Main spindle drive power: 22 kW Max. spindle speed: 4,600 rpm Bar capacity: 65 mm Spindle nose: A2-6 Sub spindle drive power: 15 kW Max. sub spindle speed: 6,000 rpm Milling spindle max. speed: 7,000 rpm Capto C6 tool system Tool magazine with 60 tool stations Lower turret with 12 tool stations, 6 of which are live stations Max. speed of driven tools: 4,000 rpm Chip conveyor

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Description WE SELL AN VERY GOOD CONDITION 5 AXIS FANUC ROBOCUT YEAR 2015 Machine will come with full tools and full equipment and amm cutting material from stock ready to work, ITS WORKING STILL IN THE TOOL WORKSHOP. The FANUC ROBOCUT ALPHA C600IA wire EDM machine was manufactured in 2015 in Japan. It is a modern Japanese electro erosion wire cutter. The Fanuc Robocut cutter is adapted to the processing of various machine parts, e.g. dies, dies, punches, as well as parts with complex, complicated shapes and materials that are difficult to cut. This model was made to order and, unlike the standard model, has a travel of 410 mm in the Z axis. The new Robocat Alpha C600IA wire cutter currently costs approx 150,000 Euro net from the manufacturer. The cutter presented here was used sporadically in the tool shop for the production of prototypes and is in very good technical condition CONTROL: FANUC series 31i-W MODEL B 5 AXIS WORKING RANGE: X : 600 mm / 900mm/min Y: 400 mm / 900mm/min U: 200 mm / 450mm/min V: 200 mm / 450mm/min Z: 310 mm / 450mm/min MAX WORPIECE WEIGHT: 1000 KG MAX WORKPIECE DIMENSIONS: 1050 x 820 x 400 mm MACHINE POWER SUPLY: 13KVA FREQUENCY: 50 / 60 Hz MACHINE WEIGHT: 3000 KG MACHINE WILL BE WORKING TILL MIDLLE FEBRUARY AND WILL BE RELEASED FROM THE PRODUCTION Iiodpfx Asydr Adomgoh FOR CUSTOMER WE ORGANIZE DISMANTLING SECURING AND LOADING. ALSO WE CAN OFFER TRANSPORT WORLDWIDE