Paper cutting machine

Polar Mohr 92X

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, IDEAL 7228-06 cutting machine, machine number 2828609, manufactured in 2007, with programmable control and light barriers, in good condition, immediately available. If you are interested, we will be happy to provide you with information about other machines in our inventory. Ibodpfxjzkcbvj An Isc You are cordially invited to inspect the machine at our premises after prior arrangement of an appointment.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Iodpfxevy Aipo An Ijbc Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2001, condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: Iedpfx Anezd T Hpo Iobc - MABEG feeder - 2 x transverse foil - 3 x longitudinal foil - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) - Hologram option (electronics refurbished in 2020) - 6 heating zones Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Ibsdpfsz Elvpsx An Iec Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: used, Year of construction: 1999, Format: 550 mm Equipment: Air Table Isdpfx Ajyzrt Sen Iebc program Photocells defect

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: Op aanvraag, For Sale: Smipack BP802AS Bundling Machine – As New Due to an incorrect purchase, we are offering this Smipack BP802AS bundling machine for sale. The machine is in brand-new condition and has never been used in production. It was professionally installed and tested only, but has never been put into commercial operation. The machine is in perfect working order, with no defects or damage. Key Specifications: Capacity: Up to 25 cycles per minute Brand-new condition – immediately available Never used in production Fully installed and ready for operation We are selling this machine solely because we have decided to purchase a larger model with additional features to better suit our production requirements. This is purely a change in our production needs and not due to any technical issues. 💰 Price: Open to reasonable offers. For more information, additional photos, technical specifications, or to arrange an inspection, please feel free to contact us. Isdpfx Aezrgimjn Iobc

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16074, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Ibjdpezimygsfx An Isc Automatic Sheet Seperator UTM-4 Automatic Sheet Seperator TM -4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer

Condition: used, Year of construction: 1998, cutting width 92 cm feeding depth 92 cm feeding high max. 12 cm Airtable, Ibsdpozgxchsfx An Ioc

Condition: new, functionality: fully functional, For sale. 4 folding machines, new in box, €775 each. A3 desktop paper folding machine. Brand: Boway, type DF-42 F. Capacity: 500-sheet feeder, 125 sheets per minute, for letter zig-zag, gate fold, double parallel fold, and fold-out. Digital counter display, 220 volts. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (within the Netherlands). If you would like to purchase this machine now, please send us your company details and VAT number. Ibjdpfx Asv Izhysn Ioc We will then send you a proforma invoice. Regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Ibedsy Uydfopfx An Ijc