REMET F2-225 Flail Mower - 1 unit

REMET CNC

Description

The wide-cut mowing units F2-225 can be mounted on tractors with a Category II hitch. They can be shifted laterally by 40 cm, either 10 cm to the left or 30 cm to the right of the center position. The robust housing ensures the stability and durability of the entire machine.
These mowing units use a single-sided drive system with belt transmission (for 5 XPB belts), which is secured by protective devices. It transmits a power of 60 to 120 hp at a PTO speed of 540 rpm. This causes the blade shaft to rotate at 2380 rpm, which ensures efficient mowing. The cutting height can be adjusted using guide skids, and the discharge hood can be adjusted in four positions. The driving speed should be adjusted according to the terrain conditions, but must not exceed 10 km/h.
The rotors of these mowing units are electronically balanced and have replaceable pivot pins. They are mounted on robust oscillating roller bearings, which are protected by seals and covers in steel housings.

Technical Data

Min./Recommended Power
60/120 hp

Recommended PTO Speed
540 rpm

Mounting System
Three-point hitch

Cutting Width
225 cm

Flail Mower Dimensions
2414 x 1010 x 1015 mm

Flails
22 pcs

Transmission
Nsds Abnxlepfx Akajdc
One-way clutch

Rear Roller
168 mm

Shaft Diameter with Flails
420 mm

Lateral Shift
40 cm

Weight
740 kg

The listing was translated automatically. Translation errors are possible.