SAFOP parallel lathe

SAFOP LEONARD 1500

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Gsdpsynky Aefx Ahvjiu Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore Giedpfoxtbf Eox Ahvou 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Gsdpfswp Nv Hox Ahvoiu Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 Gsdpfowvht Rox Ahvjiu MACH-ID 2923 Make: TOS Type: HUR 50 Year: 2015

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,120 rpm, total height: 3,000 mm, total length: 6,710 mm, total width: 3,450 mm, table length: 1,250 mm, table width: 1,250 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 1,120 mm, feed length Z-axis: 1,250 mm, feed length W-axis: 900 mm, quill stroke: 900 mm, quill diameter: 100 mm, overall weight: 14,000 kg, year of last overhaul: 2015, The machine is in good technical condition, total overhauled by Retos 2005 and a middle overhauled 2015. Gsdpfx Ahozb Eu Ievsiu Included support column, Face plate, 2 ps of angel plates, digital readout. 11 Kw motor Could be inspected under power.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Fanuc CNC Series Max swing diameter over bed: 780 mm Max swing diameter over carriage: 630 mm Max turning diameter: 406 mm Max turning length: 520 mm Bar capacity: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Spindle speed: 5,000 rpm Spindle motor power: 18.5 kW Sub-spindle bore: 45 mm Sub-spindle nose: ASA A2-5 Bellegrandi collet chucks on main and sub-spindle + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 / -51 mm B-axis travel: 590 mm Rapid traverse X/Z/B axes: 30 m/min Gisdpfoyiu Dnjx Ahveu Rapid traverse Y-axis: 10 m/min Turret type: BMT Tool positions on turret: 12 Rotating tool speed: 5,000 rpm Dimensions: 3530 x 1863 x H=2163 mm Weight: 5,900 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 5,400 mm, travel distance Z-axis: 900 mm, feed length W-axis: 900 mm, spindle diameter: 200 mm, travel distance W-axis: 2,000 mm, table load: 40,000 kg, table length: 2,500 mm, table width: 2,000 mm, year of last overhaul: 2022, power: 140 kW (190.35 HP), Equipment: rotational speed infinitely variable, We offer a Skoda Skoda W200H boring machine from the year 1992, in very good condition. Manufacturer: Skoda Model: Skoda W200H Giedpfxeymnv Se Ahvou Year of manufacture: 1992 Condition: very good Category ID: 1601 Type ID: 1276 Type: Boring machine If you have any questions or need further information, feel free to send us a message or call us.

Condition: good (used), Year of construction: 1964, functionality: fully functional, machine/vehicle number: 35870, workpiece weight (max.): 10,000 kg, travel distance X-axis: 4,200 mm, travel distance Z-axis: 4,000 mm, grinding diameter: 1,100 mm, grinding length: 4,000 mm, Naxos Union Crankshaft Grinder. Grinding length 4000mm Gsdpfx Ahoyl S N Hsveiu

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Giedpfx Ahey Hk T Iovou

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 4,000 mm, workpiece weight (max.): 6,000 kg, The PORĘBA TPK-80/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: available on stock, under power, ready for inspection Technical data: - distance between centers/turning length: 4000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 Godpfx Aoy N R Iwjhvoiu - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 6000 mm width: 1800 mm height: 1800 mm total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post