Samson PG II 20 - Pumpenturm + Ejektor

Samson PG II 20 - Pumpenturm + Ejektor

Serial number: UMS042205S1108661 Machine no.: 108661
1008322 PG II 6" discharge pump with stone trap, ejector, hydraulic ball valve for mixing function, inspection cover, automatic application rate control, ISOBUS power supply,
section discharge, level indicator, 6" blind flange, 1 revolving beacon, 1 work light LED (1850 lumens) at the rear
PG II 20 tank prepared for ejector, pump tower, SAP, and
fixed-mounted filling pump
Running gear SB/SBX
SAMSON green and epoxy coating on the inside
SlurryMaster 8000 incl. joystick, PVG 9, distributor, dispensing bar up/down, wings in/out, incl. LS control and electronic wheel control
SlurryMaster 8000 ISOBUS function (TC-BAS)
Legally required driving light LED
Hydraulic support leg (direct connection to the tractor hydraulics!)
Hydraulic suspension of the drawbar with variable drawbar eye position
Alliance 750/60R30.5 VF 389 AGRIFLEX+ (axle load 10,000 kg)
Air brake for wheel SLR 695-780
Wheel axles 13T
Universal joint 1 3/8, wide angle, 6 pieces
Scharmüller K 80 ball hitch with 20 cm extension
Hydraulic operation for emptying the stone trap
Pump tower with intake and suction pipe for ejector
Hydraulic switchover for emptying via the return line on the pump tower
Central lubrication with pump - 65 lubrication points
Central lubrication lifting mechanism (only with central lubrication) - 8 lubrication points
Central lubrication connection for implements at the rear
Lifting mechanism Category 3 incl. electric operation at the rear
Welded preparation for FAP on the tank including ejector connection on the inside
Blind flange for FAP preparation
Double-acting connections (spade slide / ADS / tilt / 50-50 or TD12)
Free, non-pressurized oil return for other attachments
Active lifting mechanism including height position sensor
Electronic filling quantity control
Automatic return of the pump tower
LED spotlights HELLA 5 pieces mounted on the pump tower and 1 piece extra at the rear - a total of 20,700 lumens
SAMSON HD NIGHT COLOR with 9-inch screen, 1 rear camera and 1 camera on the pump tower (can manage up to 4 cameras)
Preparation for TSB2 15-18-21
Preparation for SAMSON GSC (Generic Section Control)
Suction pipe with 6" spade slide incl. Perrot coupling for ejector
Toolbox 800x480x480 - 184 L
RAM 1.5" mounting ball
SAMSON water tank 18 l for hand cleaning
Air vent at the rear of the slurry tanker
Mud flap
ADS deflector tube on the side of the tanker
Bdjdj Aga Dmepfx Ai Tsi
Suction pipe for pump tower with intake, 10" Bauer, 90°, quick coupling on the pump housing
Cover 6" male Perrot (2 pieces)

The listing was translated automatically. Translation errors are possible.