Breakfast cereals production line
Schaaf Technologie GmbH

Name: Schaaf Technologie GmbH Breakfast cereals production line
Brand: Schaaf Technologie GmbH
Availability: InStock

Year of construction

2018

Condition

Used (fully functional)

Location

Vantaa

Breakfast cereals production line Schaaf Technologie GmbH

Basic data

Machine type:: Breakfast cereals production line

Manufacturer:: Schaaf Technologie GmbH

Year of construction:: 2018

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

Location:: Vantaa, Finland

Call

Details about the offer

Listing ID:: A189-21081

Update:: 11.04.2025

Description

TYPE 318:: COATING DRUM 1600
For the application of various taste and aroma giving materials by using various aromatising techniques.
The special drum profile offers following main advantages:
- optimal rolling of the product for uniform coating
- minimum possible friction/damage of the product surface
- no hidden corners, easy to clean, bacteriologically optimal surface.

Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW.

Drum diameter: 1600 mm
Drum length: 4000 mm
Drum height : 3270 mm

TYPE 284:: DRUM DRIER/ROASTER 1600 PTFE
Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate.
The whole drum is coated with a low-wear PTFE-layer. This secures processing of extremely sticky coated extrudates.
Unlike the conventional hot air drying process, this drying system works with a very high degree of efficiency.
The whole machine is made of rust free stainless steel. The radiation elements are attached to a common carrying arm in the drum.
Fgsdpfxjwbqx Hs Acisi
The roasting drum runs on special, low-noise carrier rollers and corresponds to the safety regulations and is equipped with a corrosion free covering to reduce energy losses.
The rpm of the drum is adjustable continuously.
The drive is carried out by a three-phase motor 1.5 kW.
Drum diameter: 1600 mm
Electrical heating power: 126 kW
Drum length:4300 mm
Drum height : 2960 mm

TYPE 361:: COOLING DRUM 1600
For cooling of sticky and hot extruded products under rotation for separation.
The cooling is carried out with the help of room air, which is blown controllably into the drum by a middle pressure blower 1.85 kW AC.
Please note: depending on the product characteristics, additional cooling might be necessary for breakfastcereals before the product can be packed.
Drum diameter :1600 mm
Drum length: 4000 mm
Drum height : 2890 mm

Seller

Registered since: 2025

1 listing online

Call

Send inquiry

Telephone & Fax

+358 40 0... show

These listings may also fit your interest.

Listing

Grinding Plant Neumannn & Esser GmbH PM 00 O1

Berlin

7,943 km

Grinding Plant
Neumannn & Esser GmbHPM 00 O1

Call

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Fgodpfx Aconxk Ixjioi

See details

Listing

Multiheads / checkweighers Multiweigh HDW 14-6.0

Emmeloord

7,507 km

Multiheads / checkweighers
MultiweighHDW 14-6.0

Call

Listing

Electrostatic separator (corona) - EBS-4 PRODECOLOGICA Electrostatic separator- EBS-4

Otopeni

9,225 km

Electrostatic separator (corona) - EBS-4
PRODECOLOGICAElectrostatic separator- EBS-4

€108,000

EXW ONO plus VAT

Call

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: Fodpfx Acowcp I Asisgi - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

See details

Listing

Vibratory cooling bowl feeder Vibra Schultheis WFT 12/6-58-DV

Eilenburg

7,972 km

Vibratory cooling bowl feeder
Vibra SchultheisWFT 12/6-58-DV

Call

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) Fgjdpsinwfiefx Acisi discharge height: approx. 8900 mm (incl. support) number of spiral shelves: approx. 32 pieces heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

See details

Listing

Root

8,011 km

Pasteurization line
Pasteurizationline

Call

Listing

Germany

7,870 km

Case Packer
MeypackVP 451 K

Call

Condition: ready for operation (used), Year of construction: 2008, Two Meypack case packers from the same packaging line, one in left-hand and one in right-hand version, are available. Packaging type: WA carton, max. packaging capacity: 17cycles/min, infeed height: 1450mm, discharge height: 650mm, multipack length range: 200mm-600mm, multipack width range: 120mm-300mm, multipack height range: 80mm-350mm, blank length range: 360mm-1000mm, blank width range: 300mm-700mm. Machine dimensions X/Y: approx. 5000mm/2450mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Expected to be available starting end of July 2026. Fgsdpfx Aoy Rtf Iecisi

See details

Listing

East Riding of Yorkshire, UK

7,087 km

COATING DRUM

Call

Listing

Cardboard packaging machine Comarme Kartonverschließer mit SPS GEM F470 und Kartonzentriereinheit

Ludwigsburg

7,944 km

Cardboard packaging machine
Comarme Kartonverschließer mit SPSGEM F470 und Kartonzentriereinheit

€14,990

EXW ONO plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 Fedsykugxjpfx Acijgi automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

See details

Listing

Vinifikator Vinimatik for wine 35,000 L Velo NTA 55

Privalj

8,828 km

Vinifikator Vinimatik for wine 35,000 L
VeloNTA 55

Call

Listing

Cooling Die for High Moisture Extrusion DIL Engineering GmbH FiberFlow R500

Quakenbrück

7,634 km

Cooling Die for High Moisture Extrusion
DIL Engineering GmbHFiberFlow R500

€150,000

~~€190,000~~

EXW ONO plus VAT

Call

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R500, FiberFlow R500 Cooling Die for Sale Fedpfey Um Tgox Acijgi The FiberFlow R500 Cooling Die is a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). The cooling die is designed to produce fibrous protein structures through controlled cooling and optimized flow guidance, making it particularly suitable for applications such as plant-based meat and seafood alternatives, as well as structured convenience products. The FiberFlow R500 is designed for throughput rates of up to 500 kg/h at operating pressures of up to 70 bar. Its annular (ring-shaped) geometry ensures optimal flow distribution, resulting in uniform fiber formation and consistently high product quality. The system features a modular design and is sold as a complete unit consisting of four segments. Particular emphasis has been placed on hygienic design, enabling the system to meet the stringent requirements of the food industry. The construction allows for easy and efficient cleaning. The FiberFlow R500 is designed for seamless integration into existing extrusion lines and can be incorporated into continuous production processes without difficulty.

See details