SCHELLING FH 4

SCHELLING FH 4

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Bwedsyufixepfx Afpok Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, Bwsdjyu N Rgjpfx Afpsk automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 241.371, functionality: fully functional, operating hours: 4,700 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, cutting height (max.): 80 mm, cutting width (max.): 5,800 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, total length: 7,300 mm, total width: 7,600 mm, table height: 970 mm, year of last overhaul: 2025, plate length: 7,300 mm, platform width: 5,800 mm, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Bodpfsytfxwex Afpjwk Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: ready for operation (used), Year of construction: 2011, A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a complete and connected system, including control system, software and optimization connections. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Bodpfsyrtagjx Afpewk

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Bjdpfx Aep R Sdhjfpjwk Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Bsdpfx Afsu A R D Dspswk Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Bodpfxsx Ebzds Afpjwk Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min