Monorail Hanger Shot Blasting Machine

Schlick DHB 12/14

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Rjdpfx Adoxr Umgo Aet Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: ready for operation (used), T&S ConturoMatic T2 Contour Measuring Device Optical-incremental measuring system Measuring speed 0.1...3.0 mm/s Positioning speed up to 25 mm/s Rodpfjwak Nvox Ad Aet Measuring point spacing 0.5...25 µm Accuracy ±(0.9+L(mm)/100) µm Radius accuracy ±0.005% of the nominal value at R 12.5 mm Distance accuracy ±(1.2+L(mm)/100) µm Angle accuracy ≤ 30'' Technical data has been adopted. You are welcome to visit us for a viewing. We would be happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, warranty duration: 12 months, total height: 3,600 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available—please feel free to contact us for details. Leitz | PMM 12106 with PH10 and SP25 Scanning System Refurbished coordinate measuring machine featuring the latest Renishaw technology Modernized in 2021 Measuring range XYZ: 1200 x 1000 x 600 mm Measurement uncertainty MPE (E0): 1.2 + L/400 in µm Rsdpfx Adovxh Dij Ast Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes - Renishaw PH10 motorized indexing head with SP25-2 scanning system, including FCR25-L6 (6 port) probe changer - MODUS metrology software, latest version, with CAD import (STEP format), including 1-year software maintenance - PC system with Windows 10 and two new 27" TFT monitors, height-adjustable desk included - Control cabinet with state-of-the-art safety features - M6 base plate We are happy to customize the configuration to meet your requirements. Machine sales and service only available within Germany! Optional service packages upon request: Free curbside delivery | Commissioning | Inspection | Accuracy certification according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Additional options and configurations available upon request

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: C1210000251, Yxlon Multiplex 5500 M – Industrial X-Ray & CT Inspection System The Yxlon Multiplex 5500 M is a powerful, fully digital X-ray inspection system for non-destructive material testing (NDT/NDE). It is ideally suited for applications in the automotive, aerospace, electronics manufacturing industries, as well as for cast and structural components. The system offers precise 2D radioscopy and can optionally be upgraded to a fully-featured 3D computed tomography (CT) system. Main Features • Fully digital X-ray system with HDR radioscopy and CT option • Automatic Defect Recognition (ADR) integrable • Ideal for steel, aluminum, ceramics, and plastics • High resolution via CCD camera + image intensifier • Intuitive operation via central control console • High throughput for serial inspections Technical Data (Y.Multiplex 5500 M) Inspection Chamber & Capacity • Maximum part size: Ø 600 mm, 900 mm height Rodpfx Adeyg Iqvj Aot • Maximum part weight: 60 kg • Typical throughput: 30 s for 6 positions System Data • Cabin height: approx. 2650 mm • Cabin width: approx. 2650 mm • Cabin depth: approx. 1900 mm • Total cabin weight: approx. 6500 kg • Operator console: approx. 250 kg Electrical & Power • Power supply: 3 × 230/400 V, 50 Hz • Power consumption: approx. 4.5 kVA • Main fuse: 40 A slow-blow Detector Technology • Active area: 204.8 × 204.8 mm • Pixel matrix: 1000 × 1000 active • Pixel size: 200 µm • Energy: 40 – 225 kV Manipulation & Axes • Multiple automatic/manual axes (4–7 depending on model) • U-arm manipulator for flexible positioning Condition & Applications Thanks to its modular design, reliable Siemens drives, and high-quality X-ray technology, the Yxlon Multiplex 5500 M provides a durable, precise, and efficient inspection platform. Ideally suited for: • Serial inspection & inline quality control • CT analysis of internal structures • Analysis of casting and porosity • Electronics and solder joint inspection • Aerospace and automotive components Scope of Supply • Complete Yxlon Multiplex 5500 M X-ray system • Operator console • X-ray detector incl. image intensifier • Siemens drive & control technology • Original operating manual

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves. Rsdpfx Ajwdfnzed Aet

Condition: good (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Purchase your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: CRYSTA-Apex S9108 Year of manufacture: 2015 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head interface: PH10MQ Probe head: Renishaw TP2000 Additional accessories: Rjdpfxjyhmg Se Ad Ast Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to offer you personalized advice to find the right machine for your measurement requirements. Worldwide delivery available on request!

Condition: excellent (used), Year of construction: 2018, Model IM-7010, Model Year 2018 Type: Measuring Head Model with Transmitted and Reflected Light Image Sensor: B/W CMOS, 1", 6.6 megapixels Display: LCD Monitor, 10.4" (XGA: 1024 × 768) Lens System: Dual Telecentric Lens Image-based Measurement Measuring Range: - Standard Measuring Mode: 200 mm × 200 mm (4 × R50) - Precision Measuring Mode: 125 × 125 mm Display Resolution: 0.1 µm Repeatability (without stage movement): - Standard Measuring Mode: ±1 µm - Precision Measuring Mode: ±0.5 µm Repeatability (with stage movement): - Standard Measuring Mode: ±2 µm - Precision Measuring Mode: ±1.5 µm Measurement Accuracy (±2σ): - Without stage movement: - Standard Measuring Mode: ±5 µm*1 Redpfoyc N Egjx Ad Aet - Precision Measuring Mode: ±2 µm*2 - With stage movement: - Standard Measuring Mode: ±(7 + 0.02l) µm*3 - Precision Measuring Mode: ±(4 + 0.02l) µm*4 External Remote Input: Voltage-free input (with and without contact) External Output: I.O./N.G./FAIL/MEASUREMENT Photo-MOS Output: Rated load 24 V DC, 0.5 A, ON-resistance max. 50 mΩ Interfaces: - LAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) - USB 3.1: 4 ports (rear) - USB 2.0 Type A: 2 ports (front) Recording: 500GB Hard Drive Illumination System - Transmitted Light: Telecentric transmitted light illumination (green LED) Ring Illumination: Reflected light (ring light) with four segments XY Stage: Travel range 100 × 100 mm (motor-driven), max. load capacity 5 kg Z Axis: Travel range 75 mm (motor-driven) Power Supply: 100 to 240 V AC, 50/60 Hz, max. power consumption 430 VA Environmental Resistance: - Pollution Degree: 2 - Overvoltage Category: II - Ambient Temperature: +10 to +35 °C Relative Humidity: 20 to 80% RH (non-condensing) Weight: approx. 30 kg

Year of construction: 1996, condition: ready for operation (used), overall weight: 8,600 kg, This FAVRETTO MC 130 surface grinding machine was manufactured in 1996. It features a table size of 1300 mm by 500 mm and is equipped with a DIGIT Favretto CNC system. The grinding wheel measures 406 mm in diameter and 152.4 mm in width. It has a powerful 15 kW grinding spindle motor and weighs 8,600 kg. Contact us for more information about this machine. • Table Length: 1300 mm • Table Width: 500 mm Rjdpfx Aox U Dnnod Aet • Grinding Wheel Diameter: 406 mm • Grinding Wheel Width: 152.4 mm • Grinding Wheel Bore: 100 mm • Grinding Spindle Motor Power: 15 kW

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,200 mm, total length: 3,350 mm, overall weight: 6,100 kg, input voltage: 230 V, table load: 2,500 kg, We are selling our test and demonstration machine from our Solution Center. Further machines are available. Please feel free to contact us. Mitutoyo | CRYSTA Apex 122010 Coordinate Measuring Machine Coordinate measuring machine equipped with the latest Renishaw 5-axis technology, year of manufacture 2018. Measuring range XYZ: 1200 x 2000 x 1000 mm Dimensions (XYZ): 2200 x 3350 x 3650 mm Max. workpiece weight: 2,500 kg Measurement uncertainty MPE (E0): 2.3 + 3.0 x L/1000 in µm Equipment: • Renishaw UCC S5 controller, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor • Active damping • Renishaw REVO 5-axis measuring system for single-point and scanning, incl. RSP2, 1x RSH175, 2x RSH250, and RSP3-3 kit (3xSH) including all probe changers • Modus measurement software, latest version with STEP CAD import, including 1 year software maintenance • PC system with Windows 11, 2 x 27" TFT monitors NEW, including height-adjustable desk • Control cabinet with current safety technology • Base plate M6 (loading drawer optional - see pictures) Original price in 2018 plus VAT: €245,640.00 Machine sales and service only available within Germany! Optional service package available: Rodpfx Aeyibp Usd Aet Delivery to site (free to kerbside) | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and accessories available upon request

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1001608119, measuring range X-axis: 325 mm, measuring range Y-axis: 175 mm, measuring range Z-axis: 75 mm, workpiece weight (max.): 7 kg, path measurement accuracy: 7 mm, table load: 7 kg, ambient temperature (max.): 35 °C, ambient temperature (min.): 35 °C, Equipment: lighting, Keyence LM-X100T multisensor measuring machine Excellent condition including measuring probe Armored glass replacement pane (new) Rsdpfx Adeylpu To Ajt Temperature compensation Machine is from year 2023 Delivers outstanding measurement results with very easy operation. We are selling the device due to upgrading to the largest model of the series.