Cut-to-length and slitting line

Slinet Spaltanlage S1.5 mit Liftsystem 16 Coils

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Bodpfxev Twi Rj Afgjdi

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Beckhoff, working width: 6,400 mm, warranty duration: 12 months, Equipment: CE marking, cone bending device, emergency stop, Demonstration Double Bender Manufacturer: Thalmann Year of manufacture: 2024 Model: TD 150 / 6.4 m Working length: 6400 mm 12 months warranty Equipment: - CNC graphic control - Automatic rotary shear - Automatic lateral sheet metal feed with 6.4 m table - Automatic extendable sheet loading table up to 700 mm - Automatic sheet turning unit - Offset clamping and bending beam - Backgauge area 1250 mm with separate bending zones and conical function - 3 conical zones - 6 gripper units - 4 vacuum gripper units - 7 quick-load stops Bedewxwpajpfx Afgedi - Short part gripper unit - Hardox clamping beams - Crowning unit - LED lighting - M-Guard remote maintenance - Safety area scanner The machine can be inspected at our showroom in A-6800 Feldkirch. Other working lengths and models also available.

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Bodpfx Afjz Ei D Rogedi Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg

Condition: used, Year of construction: 2020, functionality: fully functional, nuSLIT PROCUT PRINT - (103785) Year of manufacture: 2020 - factory refurbished Manufacturer: Forstner Layout 3 Equipment: - Control system: Siemens S7-F3 PLC - Speed: 45 m/min - Standard infeed roller - Standard infeed table Slitting: - Top roller adjustment: Motorized (MOV) - Number of slitting knives: 5 pairs - Slitting knife type: Stainless steel Bsdjwbh S Rjpfx Afgedi Transverse cutting: - Sectional shear (PROCUT) - Waste optimization through stepped cuts - Knife type: Stainless steel - Motorized table shear extension Includes: Film unwinder with fully rubberized infeed rollers Labeling machine: - Automatic labeling machine

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The Forstner nuSLIT Series makes all your dreams come true, in a modern sheet metal workshop and takes your production to a new level consider flexibility and productivity. With nuSLIT every function can be operated from the touch panel: coil width, finished lengths, straightening pressure to avoid stop marks, the width settings and operation of the slitting knives. nuSLIT can be integrated in a programmed production flow. The control system is totally compatible with nuIT, allowing you to plan and program your entire production from your office desk with no manual intervention. Combine with the number of decoilers you want and a manual or powered coil selector. There isn’t a better slitting and cut-to-length machine on the market! Bedpfowy Hxasx Afgodi The most important advantages: Alternating knife arrangement Unbeatable slitting precision Innovative clamping system Control system can be integrated with nuIT Fastest knife change on the market

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, Demonstration Machine Cidan MF - Manual Folding Machine The new CIDAN MF is a user-friendly manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and bend sheet metal directly in your construction vehicle or on site quickly and effortlessly. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. The manual folding machine is extremely robust and designed for long-lasting use. Thanks to its intuitive operation, this machine is immediately ready for use and delivers precise results. It enables efficient work, regardless of location or the operator’s experience. You can work efficiently and reliably without losing time on extensive training or setup adjustments. Manufacturer: CIDAN Working length: 2040 mm Steel* (400 N/mm2): 0.6 mm Stainless steel* (600 N/mm2): 0.5 mm Aluminium* (200 N/mm2): 1.0 mm Bdjdpfx Afsx Ngf Sogoi Weight: 140 kg For more information: cidanmachinery.com

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 7 mm, total width: 1,700 mm, total length: 31,000 mm, total height: 2,000 mm, input voltage: 400 V, working width: 1,250 mm, coil weight: 5,000 kg, overall weight: 8,800 kg, T20 Trapezoidal Sheet Roll Forming Line for Sale * Model: T20 Trapezoidal Sheet Roll Forming Line * Year of Manufacture: 2018 * 5-ton hydraulic decoiler included * Automatic stacker at the end of the production line The machine has seen very little use and is in excellent working condition. It has been well maintained and is fully operational. The production line is currently dismantled, making it ready for transport. If you need any additional information, photos, or videos of the machine in operation, feel free to contact us. Bdodpfx Ajzhip Iefgoi

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Bsdpfx Afsy Uzzfegsdi Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: used, functionality: fully functional, Year of construction: 2009, sheet thickness (max.): 2 mm, Schechtl MAB 310 / ECT – Motorized Swivel Bending Machine For sale is a Schechtl MAB 310 / ECT, manufactured in 2009. Technical Specifications Manufacturer: Schechtl Bjdpjzqfd Hefx Afgedi Model: MAB 310 / ECT Year of Manufacture: 2009 Working Length: 3,100 mm Control System: ECT Motorized Back Gauge Bending Capacity (Steel): up to 2.0 mm (400 N/mm²) Equipment ECT control system with program memory Motorized back gauge Fast and easy operation The machine is in fully functional condition and is currently in use. Inspection and a test run can be arranged at any time by appointment. Price: Negotiable.

Condition: used, Gram Xtrem Condor S Platform Scale, 3000 kg Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries, as well as all other industries where scales come into contact with water, moisture, or other corrosive substances. Maximum flexibility: Weighing of pallets, drums, loaded transport or hand pallet trucks, trolleys, or roll containers. Suitable for weighing standard-sized truck pallets (1200×1000 mm), large drums, roll containers, or containers on wheels. Bedpfxevtl Ibs Afgsdi Adjustable feet ensure stability during weighing and optimal force transmission to the load cells. Suitable for floor installation. Optional: Ramps for loading and unloading weighing goods without special equipment. Very low platform height (50 mm) for easy access for loading. Connection to PC software Xtrem for simultaneous recording of the weighing values of multiple scales. Minimization of technical problems through a digital connection between the platform and the display unit. Can be calibrated according to calibration class III. Gram K4i Display Unit - Stainless steel with total protection. Illuminated LCD display with extremely large digits for remote display of the weight of the object on the scale. The housing is made of stainless steel, and the resolution is 30,000 / 60,000 divisions. Features: LCD display with large digits (52 mm) Verifiable indicator for legal use Housing made of stainless steel, protection class IP-65 RS output for connecting printers, monitors, or a PC Mounting on wall, column, or table Limit value function Piece counting function Low battery indicator Max: 3000 kg Min: 20 kg e=1000g Platform scale External dimensions: 1700 x 1500 mm Weighing area: 1500×1500 mm Optional: Ramps for loading and unloading weighing goods without special equipment. Weight: 239 kg You can find more items – new and used – in our shop! International shipping costs on request!