Belt Press PT-400

STALMONT PT-400

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: Ljdsv Sq S Nopfx Agrehl • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel Lhjdpfx Agsv Srgujrol • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2026, condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools. The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone wipers. Thanks to this innovative solution, the system can be operated for the economical production of fruit and vegetable juice. You don’t need a high-pressure cleaner, so you save on electricity costs when pressing. All you need is a compressor with 8-bar pressure and a ½" water connection. • Fully automatic and infinitely variable belt speed control • Easy to clean • Easier maintenance • Rolling machine feet • Automatic belt correction Technical Information Rated output: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power consumption: 0.55 kW, 400 V, 16 A Lodpov Sq Nbsfx Agrehl Material: Wnr. 1.4301, AISI 304 stainless steel Air Operating pressure: 6 bar approx. 50 l/h Dimensions: Length: 1,080 mm Width: 1,070 mm Height: 1,320 mm Weight: 297 kg Optional: automatic juice draining

Year of construction: 2025, condition: new, In order to empty of fruit and vegetables of wood or plastic boxes in a washing machine, on a sorting conveyor or a bain-marie. The outlet amount from the box can be regulated about an infinitely variable hydraulic tilting equipment. The filling of the bin tipper is possible by means of heave stacker or hand elevating platform truck. Ledpfxscl Tx Ds Agrjhl Standard implementation: Lifting force: up to 550 kg / box Impulse engine power / elektr. Connection: 2. 2 kW/; 240 V, 3 phases, 60 hertz Weight: 350 kg Mass: 1680x1420x1255mm Sputum width: 500 mm Duration wheel process: 15sec.

Condition: like new (used), SACOME Industrial Juice Processing Line – Stainless Steel SACOME industrial line for the processing and treatment of juices, nectars, and liquid beverages, designed to integrate different operations for the preparation, circulation, and thermal treatment of the product within a continuous system. The unit incorporates process tanks, heat exchangers, sanitary pumps, piping, valves, and instrumentation, mounted on a common stainless-steel structure with an upper access platform. The system allows the product to be conditioned under controlled parameters before being sent to the next stages of production or packaging. MAIN FEATURES -Manufacturer: SACOME -Type: Industrial juice processing line -Application: juices, nectars, and liquid beverages -Continuous processing system -Process tanks in stainless steel -Product circulation and recirculation system -Tubular heat exchangers -Indirect thermal treatment Ljdpfx Agsynkgcjrohl -Sanitary product pumps -Process piping and valves -Pressure and temperature instrumentation -Process condition control -Circuits for thermal services -Construction primarily in stainless steel -Upper operation and maintenance platform -Self-supporting industrial structure -Hygienic design for the food industry -Integrable with preparation, homogenization, and filling systems PROCESS The previously prepared product is introduced into the SACOME line and circulates via sanitary pumps through the different process equipment. The heat exchange system allows the product to be heated indirectly, keeping the product and the service fluid separate. Depending on the operating configuration, different stages of heating, thermal maintenance, and subsequent cooling can be performed. The temperature control and installed instrumentation allow the established conditions to be maintained during the treatment. The product that does not reach the required parameters can, depending on the circuit configuration, be recirculated to go through the process again. Once treated, the product can be sent to a storage tank, homogenizer, or directly to the corresponding filling line. APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, and other liquid food products that require an industrial system for thermal treatment and product conditioning. Depending on the characteristics of the heat exchangers and the installed configuration, it can work with: -Fruit juices -Vegetable juices -Nectars -Beverages with pulp -Liquid purees -Fruit bases -Formulated beverages -Other compatible liquid or semi-liquid products The line can be integrated with mixing systems, homogenizers, buffer tanks, CIP systems, and filling equipment to form a complete beverage production system. Machine available for inspection. Additional technical information, capacities, process temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, capacity 750 l/h heater capacity 70 kW Lodpfx Agoyw Hu Ajrohl electrical power 1,1 kW electric outlet 400V 50Hz (three-phase) fuse 16 A dimensions: length 1 165 mm width 795 mm height 1 805 mm weight 463 kg Gas consumption liquid gas approx. 5.5 l/h Gas consumption natural gas approx. 7.5 m³/h Max. exhaust temperature: 210°C

Condition: new, capacity up to 2400 kg/h power: drive motor 0,75 kW washing machine motor 0,37 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 920 mm width 1 750 mm height 1 463 mm insertion resp. discharge height 1 290mm belt width 900 mm spread width 680 mm spread height (9 stages) 10 - 50 mm weight 1800 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuously) 1,0 - 3,5 m/min lead time 1 - 4 min water consumption for cleaning 5 l/min connections: sewage connection DN75 juice discharge connection 1 1/2 " juice discharge height 300-440 mm sewage discharge height 64 mm Lhsdpfsy At Eljx Agrsl pomace discharge height 790 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Condition: excellent (used), Juice extraction press for sale: - Flottweg B-FRU-1500 LR press, year 2004 - Pulp pump - Flottweg control cabinet - Juice pump Lhedpfx Ageyc D N Torol - Slit filter for wash water from the belt The machine is in good working order and ready for operation. Please see my other listings.

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Including: Ljdpfoxy E Azjx Agrjhl • Advertising and foam spraying portal • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Manufacturer - Zumex Food Engineering. Model - MASTERY. Ledoyh I Tkepfx Agrshl Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Electrical requirements - 220-240 V / 50 hz / 1 phase.