Gearwheel shaping machine

STANKOIMPORT KOMSOMOLEC 5A140

Gear hobbing machine:

Largest gear module: 8 mm
Largest gear diameter: 500 mm
Largest rim width: 100 mm
Spindle stroke: 150 mm
Largest spindle stroke: 125 mm
Diameter of the product spindle flange or worktable: 560 mm
Base hole in the table or product spindle flange: 110 mm
Number of double strokes: 18
Range of double stroke changes: 55-560/min
Peripheral feed rate range: 6-590 mm/min
Radial feed rate range: 0.02–0.2 mm/s
Distance between the lower plane, floor, and table work surface: 920 mm
Largest distance between the table surface and the tool spindle surface: 270 mm
Smallest distance between the table surface and the tool spindle surface: 120 mm
Largest distance between the table axis and the tool axis: 355 mm
Smallest distance between the table axis and the tool axis: 0 mm
Limb and vernier value for setting the product and tool distance: 0.01 mm
Automatic table retraction
Table movement relative to the tool axis: 355 mm
Rapid table movement speed: 1.5 m/min
High-speed table rotation: 4.5 rpm
Drilling depth: 25 mm
Tool offset at idle speed: 0.5 mm
Amount of static comparison for tool offset at an angle: ± 20 mm
Number of motors: 6
Hedezhwa Ujpfx Anpjp
Main drive motor power: 4/4.5/7.5 kW
Hydraulic drive motor: 2.2 kW
Table rotation acceleration motor power: 0.75 kW
Coolant pump motor power: 0.6 kW
Lubrication pump motor power: 0.25 kW
Power supply for the peripheral motor: 2.4 kW
Dimensions (L x W x H): 1975 x 1690 x 2510 mm
Power supply: 3x 380 V; 50 Hz
Machine weight: 7500 kg

The listing was translated automatically. Translation errors are possible.